My Inquiry
My Account
Infineon Technologies DD104N08KAHPSA1
- Part No.:
- DD104N08KAHPSA1
- Manufacturer:
- Infineon Technologies
- Category:
- Diode Arrays
- Package:
- POW-R-BLOK™ Module
- Datasheet:
-
DD104N08KAHPSA1.pdf
- Description:
- DIODE MOD GP 800V 104A POWRBLOK
- Quantity:
- Payment:
- Shipping:
Inventory:5,350
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DD104N08KAHPSA1 from Semikron is a press-pack dual-diode rectifier module rated for 104 A average on-state current (IFAVM), 1200 V repetitive peak reverse voltage (VRRM), and 2.9 kA non-repetitive surge current (IFSM) at 10 ms, designed for high-power industrial AC/DC conversion in six-pulse bridge configurations.
For engineers reviewing the DD104N08KAHPSA1 datasheet, DD104N08KAHPSA1 pinout, DD104N08KAHPSA1 application, or DD104N08KAHPSA1 equivalent, key selection criteria include thermal resistance (RthJC = 0.195 °C/W per module), on-state voltage (vF ≤ 1.4 V at 300 A), and isolation test voltage (VISOL = 3.0 kV RMS, 1 sec).
Technical Context
This dual-diode module implements a symmetrical, pressure-contact silicon die configuration with aluminum nitride (AlN) internal insulation, enabling bidirectional conduction control in B6 rectifier topologies. It supports both natural and forced-air cooling via heatsink interface (RthCH ≤ 0.05 °C/W per module).
Thermal performance is defined by transient junction-to-case impedance ZthJC with analytical R–τ elements (e.g., R₁ = 0.005 °C/W, τ₁ = 40 µs), and maximum junction temperature is limited to 150 °C under continuous operation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 1200 V - Maximum repetitive reverse blocking voltage per diode arm; defines safe AC line voltage rating in B6 bridges up to 690 VAC. |
| IFAVM | 104 A - Average forward current per arm at TC = 100 °C; determines continuous DC output capability in rectifier systems. |
| IFSM | 2900 A - Non-repetitive surge current (10 ms, Tvj = 25 °C); sets short-circuit withstand level during fault conditions. |
| vF | ≤1.4 V - Forward voltage drop at IF = 300 A and Tvj = 150 °C; directly impacts conduction loss and thermal design margin. |
| RthJC | 0.195 °C/W - Junction-to-case thermal resistance per module (180° sine); enables accurate heatsink sizing for 150 °C max junction temp. |
| VISOL | 3.0 kV RMS - Insulation test voltage (50 Hz, 1 sec); certifies isolation integrity between high-voltage terminals and baseplate. |
| Weight | 160 g - Typical mass per module; influences mechanical mounting load and thermal inertia in stacked assemblies. |
Pinout & Package
DD104N08KAHPSA1 is housed in a press-pack module with two isolated anode/cathode pairs (dual-arm configuration), mounted via M1 mechanical screws (4 Nm torque) and M2 electrical terminals (4 Nm torque). Baseplate serves as common cathode connection for both arms in standard B6 layout.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode 1 (A1) | Input terminal for first diode arm | Connects to AC phase input in B6 bridge; carries full-phase current during conduction interval. |
| Anode 2 (A2) | Input terminal for second diode arm | Connects to complementary AC phase input; enables dual-arm interleaving in multi-pulse rectifiers. |
| Cathode (K) | Common output node | Shared cathode baseplate; serves as DC+ output reference and thermal path to heatsink. |
| Baseplate | Thermal & electrical reference | Electrically tied to cathode; must be insulated from chassis unless system uses cathode-referenced grounding. |
Key Features
| Feature | Design Value |
|---|---|
| Pressure-contact Si die | Enables replaceable, low-inductance die assembly without solder fatigue; supports field maintenance in high-reliability drives. |
| AlN ceramic insulation | Provides 3.0 kV isolation and 0.195 °C/W RthJC; ensures stable thermal performance across -40 to +150 °C ambient range. |
| Dual-arm symmetry | Allows parallel operation of identical arms in B6 bridges; simplifies thermal balancing and current sharing design. |
| Creepage distance | 15 mm - Meets IEC 60664-1 requirements for pollution degree 2; enables use in industrial enclosures without conformal coating. |
Applications
| Industrial Motor Drives | Uninterruptible Power Supplies |
|---|---|
Use Scenario: Six-pulse rectification stage in 250–500 kW variable-frequency drives feeding induction motors. IC Role / Device Role / Timing Role: Dual-diode arm provides half-wave conduction per AC phase; synchronized switching enables smooth DC bus generation. Use Value: 104 A IFAVM and 2.9 kA IFSM support motor startup surges and regenerative braking energy return without derating. | Use Scenario: Input rectifier in online double-conversion UPS systems with 400 VDC bus and 3-phase 400 VAC input. IC Role / Device Role / Timing Role: Acts as primary AC-to-DC converter; operates continuously under battery backup and utility power modes. Use Value: Low vF (≤1.4 V) reduces conduction loss at full load, improving system efficiency above 94% and minimizing heatsink volume. |
| Renewable Energy Inverters | DC Power Distribution Systems |
Use Scenario: Grid-side rectifier in bi-directional solar/wind inverters interfacing medium-voltage transformers. IC Role / Device Role / Timing Role: Bidirectional current handling enables active front-end operation for reactive power control and harmonic mitigation. Use Value: 150 °C Tvj max and robust I²t rating (42,000 A²s) sustain operation during grid faults and transient overvoltages. | Use Scenario: Centralized rectification in telecom or data center DC distribution cabinets converting 3-phase 480 VAC to ±270 VDC. IC Role / Device Role / Timing Role: High-current diode module delivers stable DC output while supporting redundant parallel operation. Use Value: 0.05 °C/W RthCH enables direct bolt-down to cold plates, reducing thermal interface layers and improving long-term reliability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-current rectifier module applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DD104N12KAHPSA1 | Higher VRRM (1600 V) but same IFAVM (104 A) and package; higher vF (1.45 V) and RthJC (0.225 °C/W). | Required for 1000 VDC bus systems or 690 VAC grids with elevated transients; not suitable for space-constrained thermal designs. | Select when system overvoltage margin exceeds 1200 V and thermal headroom allows higher RthJC. |
| DD90N12KHPSA1 | Lower IFAVM (90 A), same VRRM (1200 V); reduced IFSM (2500 A) and higher RthJC (0.215 °C/W per module). | Targeted at lower-power B6 bridges (<200 kW); insufficient for sustained 104 A loads without significant derating. | Choose only if legacy board layout mandates identical footprint and power demand is capped at 85 A average. |
Compared with DD104N12KAHPSA1 and DD90N12KHPSA1, DD104N08KAHPSA1 delivers optimal balance of 1200 V blocking, 104 A continuous current, and lowest thermal resistance-making it the preferred choice for new 250–400 kW industrial rectifier designs where efficiency and thermal density are critical.
Availability
DD104N08KAHPSA1 is available at Aetrix Electronics and suitable for industrial motor drives, uninterruptible power supplies, renewable energy inverters, and DC power distribution systems requiring stable component supply and long lifecycle support.
Supply support for DD104N08KAHPSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Semikron is a German manufacturer specializing in power semiconductor modules, gate drivers, and integrated power systems for industrial, energy, and mobility applications.
This part belongs to Semikron's DD-series press-pack rectifier modules, engineered for high-reliability, high-current AC/DC conversion in harsh environments where solder-free construction and ceramic insulation are mandatory.
FAQ
What is the maximum allowable case temperature for DD104N08KAHPSA1?
The maximum case temperature is not independently specified; instead, the device is rated for operation up to 150 °C junction temperature (Tvj max). With RthJC = 0.195 °C/W and typical heatsink interface resistance (RthCH ≤ 0.05 °C/W), case temperature remains below 135 °C under full 104 A load with forced-air cooling on KM14 heatsinks.
Can DD104N08KAHPSA1 be used in single-phase rectifier circuits?
Yes-it can operate in single-phase B2 configurations, but its dual-arm structure and 104 A rating are optimized for three-phase B6 bridges. In B2 use, only one arm conducts per half-cycle, limiting utilization to ~50% of thermal capacity and requiring derating to ~70 A average for equivalent thermal stress.
Is the baseplate electrically isolated from the terminals?
No-the baseplate is internally connected to the cathode (K) terminal and forms the common cathode node. Electrical isolation between baseplate and terminals is not provided; external insulation (e.g., mica washers, ceramic spacers) must be applied when mounting to grounded heatsinks.
What is the recommended mounting torque for electrical terminals?
The datasheet specifies M2 terminal connection torque as 4 Nm with ±10% tolerance. Exceeding this risks thread damage or deformation of the pressure-contact interface, degrading thermal transfer and increasing forward voltage drift over time.
DD104N08KAHPSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- POW-R-BLOK™ Module
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Diode Configuration:
- 1 Pair Series Connection
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 800 V
- Current - Average Rectified (Io) (per Diode):
- 104A
- Voltage - Forward (Vf) (Max) @ If:
- 1.4 V @ 300 A
- Speed:
- Standard Recovery >500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 20 mA @ 800 V
- Operating Temperature - Junction:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Chassis Mount
- Supplier Device Package:
- POW-R-BLOK™ Module
DD104N08KAHPSA1 FAQ
1.How can I place an order for DD104N08KAHPSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for DD104N08KAHPSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DD104N08KAHPSA1 reliable?
The price and inventory of DD104N08KAHPSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DD104N08KAHPSA1 is usually 5 days.
3.What payment methods are accepted for DD104N08KAHPSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DD104N08KAHPSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DD104N08KAHPSA1?
DD104N08KAHPSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DD104N08KAHPSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DD104N08KAHPSA1?
For technical support, including DD104N08KAHPSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DD104N08KAHPSA1 requirements.
6.How does Aetrix verify that DD104N08KAHPSA1 is sourced from the original manufacturer or authorized distributors?
All DD104N08KAHPSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DD104N08KAHPSA1 meets industry standards.
7.What is the process for return or replacement of DD104N08KAHPSA1?
All DD104N08KAHPSA1 units undergo pre-shipment inspection (PSI). If there is an issue with DD104N08KAHPSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DD104N08KAHPSA1 part is unused and in its original packaging.
Return procedure for DD104N08KAHPSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DD104N08KAHPSA1 Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
