Infineon Technologies ESD112B102ELE6327XTMA1

Overview

ESD112B102ELE6327XTMA1 from Infineon Technologies is a bi-directional ESD and transient protection diode designed for one-line interface protection in compact PCB layouts. The device belongs to the ESD112-B1-02EL family and is selected where working voltage, capacitance, clamping behavior, and package footprint must match the protected signal path.

As an configuration of the ESD112-B1-02EL family, ESD112B102ELE6327XTMA1 combines ±5.3 V working voltage, 0.23 pF typical line capacitance, IEC61000-4-2 high ESD rating for RF signal-line protection ESD robustness, and a PG-TSLP-2-20 / 0402-class package package. For engineers reviewing the ESD112B102ELE6327XTMA1 datasheet, ESD112B102ELE6327XTMA1 pinout, ESD112B102ELE6327XTMA1 application, or ESD112B102ELE6327XTMA1 equivalent, this device is commonly relevant to RF signal-line protection, antenna-adjacent traces, 5.3 V bidirectional interfaces, and compact low-capacitance ESD protection positions.

Technical Context

In a board-level protection design, ESD112B102ELE6327XTMA1 should be placed close to the connector, antenna feed, user-accessible node, or exposed signal entry point. Short routing is important because trace inductance can increase the actual residual voltage seen by the protected IC during a fast ESD pulse.

The bi-directional structure and ±5.3 V working-voltage rating define the type of normal signal that can be protected without clipping. Its 0.23 pF capacitance makes the device suitable for bidirectional RF or signal paths that may swing around ground, while 29 V typical clamping at 16 A TLP and 38 V typical at 30 A TLP and 1 Ω typical forward and reverse dynamic resistance define how strongly the diode limits transient stress.

ESD112B102ELE6327XTMA1 should be evaluated with the final interface voltage, signal bandwidth, surge profile, connector exposure level, and PCB layout. part is listed with 15000-piece tape and reel, MSL 1 handling, lead-free and halogen-free compliance, and a not for new design lifecycle status.

Key Specifications

Pinout & Package

The ESD112B102ELE6327XTMA1 pinout follows a two-terminal protection-device layout in the PG-TSLP-2-20 / 0402-class package package. The protected line and reference return must be routed with minimum loop area, and orientation must be verified for uni-directional options.

For PCB design, place ESD112B102ELE6327XTMA1 ahead of the sensitive IC and close to the transient entry point. Land pattern, stencil opening, solder mask, and inspection process should follow the manufacturer package drawing.

Key Features

• Bi-directional one-line ESD / transient protection diode.
• ±5.3 V working-voltage rating matched to the protected interface.
• 0.23 pF typical capacitance for the target signal type.
• IEC61000-4-2 high ESD rating for RF signal-line protection ESD robustness.
• IEC61000-4-4 40 A with 5/50 ns waveform
• IEC61000-4-5 3 A with 8/20 µs waveform
• 29 V typical clamping at 16 A TLP and 38 V typical at 30 A TLP
• 1 Ω typical forward and reverse dynamic resistance
• PG-TSLP-2-20 / 0402-class package package for compact SMT protection placement.
• 15000-piece tape and reel for automated assembly.

Applications

Equivalent & Alternatives

When evaluating ESD112B102ELE6327XTMA1 equivalent devices, engineers should compare working voltage, direction type, capacitance, ESD rating, EFT and surge capability, clamping voltage, dynamic resistance, package footprint, packing, and lifecycle status.

Compared with a generic TVS diode, ESD112B102ELE6327XTMA1 should be selected by the protected line voltage, capacitance budget, residual clamping voltage, package land pattern, and system-level validation result rather than by package size alone.

Quality

ESD112B102ELE6327XTMA1 should be sourced as original Infineon Technologies components through traceable and controlled supply channels. Quality verification may include reel-label inspection, package inspection, top-mark review, date-code review, solderability evaluation, and incoming sampling based on production risk.

Because small ESD diodes are often placed at external interfaces, correct storage, ESD-safe handling, MSL control, land-pattern accuracy, and traceability are important for stable assembly yield and reliable field protection. For products listed as not for new design, approved substitute planning should be completed before long-term production use.

Availability

ESD112B102ELE6327XTMA1 available at Aetrix Electronics and suitable for RF-line ESD protection, antenna modules, compact 0402 signal protection, and bidirectional low-capacitance interfaces requiring compact transient protection and traceable component supply.

Supply support may include scheduled delivery planning, tape-and-reel sourcing, BOM continuity assistance, replacement review, and long-term availability support for OEM manufacturers, EMS providers, repair facilities, and embedded hardware developers.

For production deployment, confirming package code, working voltage, capacitance, clamping voltage, ESD rating, lifecycle status, and approved substitute options helps reduce procurement risk and improve manufacturing stability.

Manufacturer

Infineon Technologies supplies semiconductor products including discrete protection devices, power semiconductors, microcontrollers, sensors, security ICs, and system-level components for industrial, automotive, communication, computing, and consumer electronics applications.

The ESD112-B1-02EL family is part of the manufacturer protection-device portfolio for line-level ESD and transient suppression. ESD112B102ELE6327XTMA1 is positioned for one-line protection where voltage, capacitance, and package must match the target PCB.

FAQ

What is ESD112B102ELE6327XTMA1 used for?

ESD112B102ELE6327XTMA1 is used for ESD and transient protection of one exposed signal or interface line where compact PCB placement and controlled clamping behavior are required.

Where can I find the ESD112B102ELE6327XTMA1 datasheet download?

The ESD112B102ELE6327XTMA1 datasheet is available from the manufacturer for the ESD112-B1-02EL device family and includes electrical ratings, package data, and ordering information.

What should be considered in ESD112B102ELE6327XTMA1 pinout design?

Pinout design should focus on device polarity, package orientation, protected-line routing, reference return inductance, and placement close to the connector or transient entry point.

Is ESD112B102ELE6327XTMA1 suitable for high-speed lines?

It may be suitable when the 0.23 pF capacitance and clamping behavior match the signal bandwidth, insertion-loss, and system-level protection requirements.

What matters most when selecting a ESD112B102ELE6327XTMA1 equivalent?

Equivalent selection should compare working voltage, capacitance, ESD rating, clamping voltage, dynamic resistance, package footprint, lifecycle status, and validation results.