Infineon Technologies ESD5V0S1U02VH6327XTSA1

Overview

ESD5V0S1U02VH6327XTSA1 from Infineon Technologies is a uni-directional ESD and transient protection diode designed for one-line interface protection in compact PCB layouts. The device belongs to the ESD5V0S1U-02V family and is selected where working voltage, capacitance, clamping behavior, and package footprint must match the protected signal path.

As an configuration of the ESD5V0S1U-02V family, ESD5V0S1U02VH6327XTSA1 combines 5 V working voltage, 35 pF to 40 pF class capacitance at 1 MHz typical line capacitance, IEC61000-4-2 up to ±25 kV air and ±20 kV contact from distributor documentation ESD robustness, and a PG-SC79-2-1 / SC-79, SOD-523 package package. For engineers reviewing the ESD5V0S1U02VH6327XTSA1 datasheet, ESD5V0S1U02VH6327XTSA1 pinout, ESD5V0S1U02VH6327XTSA1 application, or ESD5V0S1U02VH6327XTSA1 equivalent, this device is commonly relevant to 5 V interface protection, general-purpose ESD protection, portable electronics, keypads, buttons, and exposed low-speed signal lines.

Technical Context

In a board-level protection design, ESD5V0S1U02VH6327XTSA1 should be placed close to the connector, antenna feed, user-accessible node, or exposed signal entry point. Short routing is important because trace inductance can increase the actual residual voltage seen by the protected IC during a fast ESD pulse.

The uni-directional structure and 5 V working-voltage rating define the type of normal signal that can be protected without clipping. Its 35 pF to 40 pF class capacitance at 1 MHz capacitance makes the device suitable for 5 V general-purpose signal and control lines where higher capacitance is acceptable, while 14.5 V typical clamping at the specified peak pulse current and Low dynamic resistance for a general-purpose 5 V clamp; verify exact curve from datasheet. define how strongly the diode limits transient stress.

ESD5V0S1U02VH6327XTSA1 should be evaluated with the final interface voltage, signal bandwidth, surge profile, connector exposure level, and PCB layout. part is listed with 3000-piece tape and reel, MSL 1 handling, lead-free and halogen-free compliance, and a scheduled for obsolescence / verify lifecycle lifecycle status.

Key Specifications

Pinout & Package

The ESD5V0S1U02VH6327XTSA1 pinout follows a two-terminal protection-device layout in the PG-SC79-2-1 / SC-79, SOD-523 package package. The protected line and reference return must be routed with minimum loop area, and orientation must be verified for uni-directional options.

For PCB design, place ESD5V0S1U02VH6327XTSA1 ahead of the sensitive IC and close to the transient entry point. Land pattern, stencil opening, solder mask, and inspection process should follow the manufacturer package drawing.

Key Features

• Uni-directional one-line ESD / transient protection diode.
• 5 V working-voltage rating matched to the protected interface.
• 35 pF to 40 pF class capacitance at 1 MHz typical capacitance for the target signal type.
• IEC61000-4-2 up to ±25 kV air and ±20 kV contact from distributor documentation ESD robustness.
• General-purpose 5 V ESD / transient protection device; verify EFT requirement against final standard.
• 5.5 A peak pulse current with 8/20 µs waveform
• 14.5 V typical clamping at the specified peak pulse current
• Low dynamic resistance for a general-purpose 5 V clamp; verify exact curve from datasheet.
• PG-SC79-2-1 / SC-79, SOD-523 package package for compact SMT protection placement.
• 3000-piece tape and reel for automated assembly.

Applications

Equivalent & Alternatives

When evaluating ESD5V0S1U02VH6327XTSA1 equivalent devices, engineers should compare working voltage, direction type, capacitance, ESD rating, EFT and surge capability, clamping voltage, dynamic resistance, package footprint, packing, and lifecycle status.

Compared with a generic TVS diode, ESD5V0S1U02VH6327XTSA1 should be selected by the protected line voltage, capacitance budget, residual clamping voltage, package land pattern, and system-level validation result rather than by package size alone.

Quality

ESD5V0S1U02VH6327XTSA1 should be sourced as original Infineon Technologies components through traceable and controlled supply channels. Quality verification may include reel-label inspection, package inspection, top-mark review, date-code review, solderability evaluation, and incoming sampling based on production risk.

Because small ESD diodes are often placed at external interfaces, correct storage, ESD-safe handling, MSL control, land-pattern accuracy, and traceability are important for stable assembly yield and reliable field protection. For products listed as not for new design, approved substitute planning should be completed before long-term production use.

Availability

ESD5V0S1U02VH6327XTSA1 available at Aetrix Electronics and suitable for 5 V general-purpose ESD protection, SC-79 TVS replacement, keypad lines, button inputs, and portable electronics protection requiring compact transient protection and traceable component supply.

Supply support may include scheduled delivery planning, tape-and-reel sourcing, BOM continuity assistance, replacement review, and long-term availability support for OEM manufacturers, EMS providers, repair facilities, and embedded hardware developers.

For production deployment, confirming package code, working voltage, capacitance, clamping voltage, ESD rating, lifecycle status, and approved substitute options helps reduce procurement risk and improve manufacturing stability.

Manufacturer

Infineon Technologies supplies semiconductor products including discrete protection devices, power semiconductors, microcontrollers, sensors, security ICs, and system-level components for industrial, automotive, communication, computing, and consumer electronics applications.

The ESD5V0S1U-02V family is part of the manufacturer protection-device portfolio for line-level ESD and transient suppression. ESD5V0S1U02VH6327XTSA1 is positioned for one-line protection where voltage, capacitance, and package must match the target PCB.

FAQ

What is ESD5V0S1U02VH6327XTSA1 used for?

ESD5V0S1U02VH6327XTSA1 is used for ESD and transient protection of one exposed signal or interface line where compact PCB placement and controlled clamping behavior are required.

Where can I find the ESD5V0S1U02VH6327XTSA1 datasheet download?

The ESD5V0S1U02VH6327XTSA1 datasheet is available from the manufacturer for the ESD5V0S1U-02V device family and includes electrical ratings, package data, and ordering information.

What should be considered in ESD5V0S1U02VH6327XTSA1 pinout design?

Pinout design should focus on device polarity, package orientation, protected-line routing, reference return inductance, and placement close to the connector or transient entry point.

Is ESD5V0S1U02VH6327XTSA1 suitable for high-speed lines?

It may be suitable when the 35 pF to 40 pF class capacitance at 1 MHz capacitance and clamping behavior match the signal bandwidth, insertion-loss, and system-level protection requirements.

What matters most when selecting a ESD5V0S1U02VH6327XTSA1 equivalent?

Equivalent selection should compare working voltage, capacitance, ESD rating, clamping voltage, dynamic resistance, package footprint, lifecycle status, and validation results.