My Inquiry
My Account
Diodes Incorporated GBJ1001-F
- Part No.:
- GBJ1001-F
- Manufacturer:
- Diodes Incorporated
- Category:
- Bridge Rectifiers
- Package:
- 4-SIP, GBJ
- Datasheet:
-
GBJ1001-F.pdf
- Description:
- BRIDGE RECT 1PHASE 100V 10A GBJ
- Quantity:
- Payment:
- Shipping:
Inventory:13
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
GBJ1001-F from Diodes Incorporated is a 10A standard recovery bridge rectifier with 100V peak repetitive reverse voltage (VRRM), 1.05V max forward voltage at 5A, and 10µA max reverse leakage current at 25°C. It features glass-passivated die construction, 1500VRMS case dielectric strength, and is rated for 170A non-repetitive surge current - used in AC/DC power supplies for industrial control panels.
For engineers reviewing the GBJ1001-F datasheet, GBJ1001-F pinout, GBJ1001-F application, or GBJ1001-F equivalent, key selection criteria include VRRM margin for line-voltage transients, thermal resistance (1.4°C/W junction-to-case), through-hole mounting compatibility with #6 screw, and UL recognition (E95060) for safety-critical power conversion designs.
Technical Context
This single-phase full-wave bridge rectifier integrates four silicon diodes in a GBJ package with molded polarity marking and bright tin-plated leads. Its standard recovery characteristic (trr not specified, consistent with standard recovery classification) supports line-frequency (50/60Hz) rectification without requiring snubbers in low-switching-noise applications.
The device operates across –55°C to +150°C junction temperature range and delivers 10A average forward current at TC = +110°C when mounted on a 150mm × 150mm × 1.6mm copper heatsink. Thermal resistance of 1.4°C/W enables predictable junction temperature rise under sustained load.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 100 V - Withstands 100V peak reverse voltage, suitable for 70V RMS input (e.g., 100VAC nominal systems) |
| IF(AV) | 10 A - Sustains 10A average forward current at TC = +110°C with proper heatsinking |
| VF Max | 1.05 V @ 5A - Low conduction loss improves efficiency in high-current linear power supplies |
| IR Max | 10 µA @ 25°C - Minimal reverse leakage preserves hold-up time in capacitor-input filter stages |
| IFSM | 170 A - Handles 8.3ms half-sine surge, supporting inrush current during cold-start of transformer-based supplies |
| RθJC | 1.4 °C/W - Enables accurate thermal design when mounted on standardized copper heatsink per datasheet test condition |
Pinout & Package
Package: GBJ - 4-terminal through-hole plastic package (UL 94V-0), 30.0mm × 20.0mm × 17.5mm typical, designed for #6 screw mounting with ≤5.0 in-lbs torque.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| AC1 | Input AC Terminal 1 | One of two alternating current inputs; connects to primary winding of step-down transformer |
| AC2 | Input AC Terminal 2 | Second AC input; completes full-wave bridge input path with AC1 |
| + (Anode Output) | Positive DC Output | Full-wave rectified positive output node; feeds bulk capacitor or regulator input |
| – (Cathode Output) | Negative DC Output | Full-wave rectified negative/return node; forms DC common reference for downstream circuitry |
Key Features
| Feature | Design Value |
|---|---|
| Glass passivated die | Enhances long-term reliability and moisture resistance in humid industrial environments |
| 1500VRMS dielectric strength | Meets reinforced insulation requirements for Class I equipment per IEC 60950-1 |
| UL Recognized (E95060) | Validates compliance with end-equipment safety standards without additional certification burden |
| Lead-free & RoHS compliant | Supports environmental compliance for global electronics manufacturing and export |
Applications
| Industrial AC/DC Power Supplies | Motor Drive Front-End Rectifiers |
|---|---|
Use Scenario: Transformer-isolated 100VAC input power supply for PLC I/O modules. IC Role / Device Role / Timing Role: Full-wave bridge rectifier converting AC line to unregulated DC bus. Use Value: 10A rating and 170A surge capability handle motor startup surges and transient overloads without failure. | Use Scenario: Input stage of 3-phase inverter front-end using single-phase auxiliary supply. IC Role / Device Role / Timing Role: Standard-recovery bridge providing DC link for gate driver ICs and logic rails. Use Value: Low VF (1.05V) minimizes heat generation in space-constrained drive enclosures. |
| Test Equipment Power Modules | Commercial HVAC Control Boards |
Use Scenario: Bench power supply with adjustable output delivering up to 8A continuous DC. IC Role / Device Role / Timing Role: Primary rectification element feeding linear regulator or buck converter. Use Value: UL recognition simplifies regulatory approval for lab-grade instrumentation. | Use Scenario: 24VAC-to-DC conversion for microcontroller and relay control on HVAC mainboard. IC Role / Device Role / Timing Role: Bridge rectifier in capacitor-input filter supplying 3.3V/5V regulators. Use Value: 10µA IR at 25°C ensures stable DC rail during standby mode with minimal battery drain. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bridge rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| GBU10K-E3/51 (Vishay) | Same 100V VRRM, 10A IF, but GBU package (smaller footprint, lower IFSM = 120A) | Limited surge handling; unsuitable where 170A inrush occurs | Choose only if board space is constrained and surge events are absent or clamped externally |
| KBP101 (ON Semiconductor) | 100V VRRM, 10A IF, but KBP package (lower RθJC = 1.2°C/W, higher IR = 50µA @ 25°C) | Higher leakage may reduce hold-up time in capacitor-input designs | Preferable for thermally limited layouts, but verify leakage impact on minimum DC bus voltage |
Compared with GBU10K-E3/51 and KBP101, GBJ1001-F offers superior surge robustness (170A vs. ≤120A) and lower leakage (10µA vs. ≥50µA), making it optimal for industrial power supplies subject to frequent cold starts and long hold-up requirements.
Availability
GBJ1001-F is available at Aetrix Electronics and suitable for industrial AC/DC power supplies, motor drive front-end rectifiers, and commercial HVAC control boards requiring stable component supply and UL-recognized safety compliance.
Supply support for GBJ1001-F includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design, manufacturing, and sales operations across Asia, Europe, and North America.
The GBJ series belongs to Diodes' standard-recovery bridge rectifier product line, engineered for cost-effective, high-reliability AC/DC conversion in industrial, appliance, and infrastructure power systems.
FAQ
What is the maximum operating temperature for GBJ1001-F?
The junction and storage temperature range is –55°C to +150°C. The device delivers its full 10A average forward current rating only when case temperature is maintained at +110°C or below, typically requiring heatsinking per the 150mm × 150mm copper plate test condition.
Is GBJ1001-F suitable for high-frequency switching applications?
No - GBJ1001-F is a standard recovery bridge rectifier with no specified reverse recovery time (trr). It is intended for 50/60Hz line-frequency rectification. Using it in high-frequency SMPS (>20kHz) risks excessive switching losses and thermal runaway due to slow carrier recombination.
Does GBJ1001-F require a heatsink in all applications?
A heatsink is required to sustain 10A continuous current. At ambient temperatures above +40°C or without forced airflow, derating applies. For loads ≤3A at TA ≤ +50°C with natural convection, operation without external heatsink may be feasible - verify junction temperature using RθJC = 1.4°C/W and power dissipation (VF × IF).
How is polarity marked on the GBJ1001-F package?
Polarity is molded directly onto the plastic body: the "+" symbol identifies the positive DC output terminal, and "–" marks the negative DC output. AC input terminals are labeled "AC1" and "AC2" adjacent to their respective leads, visible on the top surface of the package.
GBJ1001-F Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 4-SIP, GBJ
- Packaging:
- Tube
- Product Status:
- Active
- Diode Type:
- Single Phase
- Technology:
- Standard
- Voltage - Peak Reverse (Max):
- 100 V
- Current - Average Rectified (Io):
- 10 A
- Voltage - Forward (Vf) (Max) @ If:
- 1.05 V @ 5 A
- Current - Reverse Leakage @ Vr:
- 10 µA @ 100 V
- Operating Temperature:
- -65°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- GBJ
GBJ1001-F FAQ
1.How can I place an order for GBJ1001-F through Aetrix?
Please submit a Request for Quotation (RFQ) for GBJ1001-F on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for GBJ1001-F reliable?
The price and inventory of GBJ1001-F are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for GBJ1001-F is usually 5 days.
3.What payment methods are accepted for GBJ1001-F?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for GBJ1001-F transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for GBJ1001-F?
GBJ1001-F orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your GBJ1001-F order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for GBJ1001-F?
For technical support, including GBJ1001-F datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your GBJ1001-F requirements.
6.How does Aetrix verify that GBJ1001-F is sourced from the original manufacturer or authorized distributors?
All GBJ1001-F products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that GBJ1001-F meets industry standards.
7.What is the process for return or replacement of GBJ1001-F?
All GBJ1001-F units undergo pre-shipment inspection (PSI). If there is an issue with GBJ1001-F, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The GBJ1001-F part is unused and in its original packaging.
Return procedure for GBJ1001-F:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
GBJ1001-F Tags
-
HDS10M-13
Diodes Incorporated
-
CD-MBL106S
Bourns Inc.
-
MB10S-13
Diodes Incorporated
-
CD-MBL206SL
Bourns Inc.
-
MB4S-TP
Micro Commercial Co
-
MB6S-TP
Micro Commercial Co
-
CD-MBL210S
Bourns Inc.
-
BAS3007ARPPE6327HTSA1
Infineon Technologies
-
DF02M
Diodes Incorporated
-
CD-MBL210SL
Bourns Inc.
-
DF04M
Diodes Incorporated
-
DF01M
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
