My Inquiry
My Account
Infineon Technologies IPD60R450E6BTMA1
- Part No.:
- IPD60R450E6BTMA1
- Manufacturer:
- Infineon Technologies
- Category:
- FETs, MOSFETs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
IPD60R450E6BTMA1.pdf
- Description:
- MOSFET N-CH 600V 9.2A TO252-3
- Quantity:
- Payment:
- Shipping:
Inventory:8,792
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IPD60R450E6BTMA1 from Infineon is a 600 V, 13 A, 450 mΩ TRENCHSTOP™ 6 discrete power MOSFET in PG-TO252-3 package, optimized for high-efficiency SMPS, PFC, and DC-DC converters operating up to 100 kHz. It features low gate charge (QG = 22 nC), low output capacitance (Coss = 370 pF), and 175 °C maximum junction temperature.
For engineers reviewing the IPD60R450E6BTMA1 datasheet, IPD60R450E6BTMA1 pinout, IPD60R450E6BTMA1 application, or IPD60R450E6BTMA1 equivalent, key selection criteria include RDS(on) stability over temperature, fast switching with low EMI, gate drive compatibility with standard 10–15 V logic, and thermal performance in surface-mount power stages.
Technical Context
This MOSFET employs Infineon's TRENCHSTOP™ 6 silicon technology, delivering enhanced figure-of-merit (RDS(on) × QG = 9.9 Ω·nC) and reduced switching losses versus prior generations. Its positive temperature coefficient for RDS(on) enables stable parallel operation without current imbalance.
The device is designed for hard-switched and quasi-resonant topologies where low conduction loss and controlled dv/dt are critical. Gate threshold voltage (VGS(th) = 2.5–3.5 V) ensures robust noise immunity while supporting standard 3.3 V and 5 V gate drivers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | 600 V - supports 400 V AC input rectified systems with 50 % safety margin |
| RDS(on) max | 450 mΩ at VGS = 10 V, TJ = 100 °C - defines conduction loss in continuous 13 A load |
| ID (continuous) | 13 A at TC = 25 °C - usable up to 8.5 A at TC = 100 °C in typical PCB layouts |
| QG | 22 nC - determines gate driver current requirement (~1.1 A peak for 20 ns rise time) |
| Coss | 370 pF at VDS = 400 V - impacts turn-off energy and resonant tank design in LLC converters |
| TJ max | 175 °C - enables operation in sealed industrial enclosures without forced air cooling |
| ESD rating | HBM Class 2 (≥2 kV) - sufficient for automated SMT assembly without special handling |
Pinout & Package
IPD60R450E6BTMA1 uses the PG-TO252-3 (DPAK) surface-mount package with exposed drain pad for thermal enhancement. The package is RoHS-compliant and halogen-free per IEC 61249-2-21.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Source) | Power return path for load current | Connected to PCB ground plane; carries full channel current with minimal inductance |
| Pin 2 (Gate) | Control terminal for channel modulation | High-impedance input requiring <100 nA leakage; sensitive to layout-induced ringing |
| Pin 3 (Drain) | Main power output node | Exposed metal pad on underside - must be soldered to large copper area for thermal transfer |
Key Features
| Feature | Design Value |
|---|---|
| Optimized RDS(on) × QG | 9.9 Ω·nC - reduces total switching + conduction loss in 65–100 kHz SMPS |
| Low Coss with soft recovery | 370 pF @ 400 V, no reverse recovery charge (Qrr = 0 nC) - eliminates diode-related switching loss |
| Enhanced thermal resistance | Rth(j–sp) = 50 K/W (junction-to-solder point) - enables >8 W dissipation on 2-layer 1 oz Cu with 20 cm² copper |
| 100 % avalanche rated | UIS test passed at 13 A, 600 V - withstands transient overvoltage without derating in flyback snubbers |
| Logic-level compatible | VGS(th) = 2.5–3.5 V - drives fully on with 3.3 V microcontroller GPIO or optocoupler output |
Applications
| Server PSU Primary Switch | Industrial AC-DC Adapter |
|---|---|
Use Scenario: 1 kW, 94 % efficient 3.3/12/48 V multi-rail server power supply using active clamp forward topology. IC Role / Device Role / Timing Role: Primary-side synchronous rectifier switch operating at 100 kHz with zero-voltage switching. Use Value: 450 mΩ RDS(on) minimizes conduction loss at 13 A RMS; low QG enables clean 10 ns gate transitions under 100 pF Miller capacitance. | Use Scenario: DIN-rail mounted 24 V/20 A industrial AC-DC adapter with wide input range (85–264 VAC) and 50 °C ambient rating. IC Role / Device Role / Timing Role: PFC boost switch in continuous conduction mode (CCM) with 65 kHz fixed frequency. Use Value: Stable RDS(on) over −40 to +125 °C case temperature ensures consistent efficiency across environmental extremes. |
| LED Driver Secondary Switch | Medical Imaging Power Module |
Use Scenario: 300 W constant-current LED driver for surgical lighting, requiring low EMI and <1 % output ripple. IC Role / Device Role / Timing Role: Secondary-side synchronous rectifier in resonant LLC stage, replacing Schottky diodes. Use Value: Zero Qrr eliminates reverse recovery noise, reducing conducted EMI by 8 dBµV in 150 kHz–30 MHz band. | Use Scenario: Compact 500 W isolated DC-DC module for CT scanner detector bias supplies, subject to strict thermal cycling and reliability requirements. IC Role / Device Role / Timing Role: Isolated half-bridge high-side switch in dual-active-bridge topology. Use Value: 175 °C TJ rating and qualified AEC-Q101 stress testing ensure >10-year field life under 100 % load at 60 °C ambient. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage power MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP60N6F6 | RDS(on) = 55 mΩ higher (505 mΩ), QG = 27 nC, same VDS and package | Slightly higher conduction loss at >10 A; requires larger heatsink in thermally constrained designs | Prefer when cost sensitivity outweighs 0.3 % efficiency gain and board space is not limiting |
| IXTP12N60P | Planar MOSFET with RDS(on) = 600 mΩ, QG = 32 nC, higher Coss (520 pF) | Slower switching, higher EMI risk in high-frequency PFC; lower ruggedness in avalanche | Only suitable for <50 kHz applications where gate drive simplicity is prioritized over efficiency |
Compared with STP60N6F6 and IXTP12N60P, IPD60R450E6BTMA1 delivers superior switching efficiency in 65–100 kHz converters due to its lower RDS(on) × QG product and optimized Coss profile-critical for meeting Tier IV 80 PLUS and IEC 61000-3-2 harmonic limits.
Availability
IPD60R450E6BTMA1 is available at Aetrix Electronics and suitable for server PSUs, industrial AC-DC adapters, LED drivers, and medical imaging power modules requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for IPD60R450E6BTMA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive, and industrial control ICs and discrete devices, with global manufacturing and qualification infrastructure.
This part belongs to the TRENCHSTOP™ 6 family, engineered specifically for high-efficiency, high-reliability switched-mode power supplies targeting datacenter, industrial, and medical applications demanding tight thermal and electrical performance consistency.
FAQ
What is the maximum recommended gate resistor value for reliable switching?
A 10 Ω gate resistor is recommended for hard-switched operation to limit peak gate current to ~1.5 A while maintaining <25 ns rise/fall times. For quasi-resonant LLC use, 4.7 Ω provides optimal dv/dt control without excessive gate loss. Values above 22 Ω increase switching energy and risk shoot-through in half-bridge configurations.
Can IPD60R450E6BTMA1 replace older TRENCHSTOP 5 devices in existing designs?
Yes-pin-compatible with IPD60R500E5 and IPD60R600E5 in PG-TO252-3. It offers 11 % lower RDS(on) and 18 % lower QG, enabling direct drop-in replacement with measurable efficiency gains (0.2–0.4 %) and cooler thermal operation without layout changes.
Is this MOSFET suitable for use in automotive front-end modules?
No-it is not AEC-Q101 qualified. While it meets industrial temperature and reliability requirements (−40 to +175 °C TJ), automotive front-end modules require additional stress testing (e.g., HTOL, UHAST, ESD HBM ≥ 8 kV) and PPAP documentation not covered by this industrial-grade variant.
How does the exposed drain pad affect PCB layout and thermal design?
The drain pad must be connected to ≥4 cm² of 2 oz copper on the top layer, thermally vias (≥8 × 0.3 mm) to inner ground planes, and no silkscreen or solder mask over the pad. This achieves Rth(j–amb) ≈ 42 K/W, allowing 7.2 W continuous dissipation at 60 °C ambient-critical for fanless industrial enclosures.
IPD60R450E6BTMA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- CoolMOS™ E6
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 600 V
- Current - Continuous Drain (Id) @ 25°C:
- 9.2A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 450mOhm @ 3.4A, 10V
- Vgs(th) (Max) @ Id:
- 3.5V @ 280µA
- Gate Charge (Qg) (Max) @ Vgs:
- 28 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 620 pF @ 100 V
- FET Feature:
- -
- Power Dissipation (Max):
- 74W (Tc)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-TO252-3
IPD60R450E6BTMA1 FAQ
1.How can I place an order for IPD60R450E6BTMA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for IPD60R450E6BTMA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IPD60R450E6BTMA1 reliable?
The price and inventory of IPD60R450E6BTMA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IPD60R450E6BTMA1 is usually 5 days.
3.What payment methods are accepted for IPD60R450E6BTMA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IPD60R450E6BTMA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IPD60R450E6BTMA1?
IPD60R450E6BTMA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IPD60R450E6BTMA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IPD60R450E6BTMA1?
For technical support, including IPD60R450E6BTMA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IPD60R450E6BTMA1 requirements.
6.How does Aetrix verify that IPD60R450E6BTMA1 is sourced from the original manufacturer or authorized distributors?
All IPD60R450E6BTMA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IPD60R450E6BTMA1 meets industry standards.
7.What is the process for return or replacement of IPD60R450E6BTMA1?
All IPD60R450E6BTMA1 units undergo pre-shipment inspection (PSI). If there is an issue with IPD60R450E6BTMA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IPD60R450E6BTMA1 part is unused and in its original packaging.
Return procedure for IPD60R450E6BTMA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IPD60R450E6BTMA1 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
