My Inquiry
My Account
Infineon Technologies IRFP048N
- Part No.:
- IRFP048N
- Manufacturer:
- Infineon Technologies
- Category:
- FETs, MOSFETs
- Package:
- TO-247-3
- Datasheet:
-
IRFP048N.pdf
- Description:
- MOSFET N-CH 55V 64A TO247AC
- Quantity:
- Payment:
- Shipping:
Inventory:8,668
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IRFP048N from Infineon Technologies (formerly International Rectifier) is an N-channel enhancement-mode power MOSFET in TO-247AC package, rated for 55 V VDS, 68 A ID (TC = 25°C), and 180 W PD. It features RDS(on) ≤ 12.5 mΩ at VGS = 10 V and is used in DC-DC converters, motor drives, and uninterruptible power supplies.
For engineers reviewing the IRFP048N datasheet, IRFP048N pinout, IRFP048N application, or IRFP048N equivalent, key selection criteria include on-resistance at 10 V gate drive, safe operating area under repetitive avalanche conditions, thermal resistance from junction to case, and gate charge for high-frequency switching efficiency.
Technical Context
This MOSFET employs planar stripe cell structure with optimized gate oxide thickness and doped polysilicon gate for low RDS(on) and controlled Qg. Its body diode exhibits trr = 120 ns and Qrr = 190 nC at IF = 34 A, enabling hard-switched flyback and synchronous rectification.
The device supports continuous drain current up to 68 A at TC = 25°C and derates linearly to 34 A at TC = 100°C. It is characterized for unclamped inductive switching (UIS) with EAS = 420 mJ at TJ = 25°C, confirming ruggedness in motor control transients.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | 55 V - Maximum blocking voltage in off-state; defines maximum bus voltage in buck or half-bridge topologies |
| RDS(on) max | 12.5 mΩ at VGS = 10 V - Directly impacts conduction loss in high-current 12 V/24 V systems |
| ID (continuous) | 68 A at TC = 25°C - Supports >50 A load current with adequate heatsinking in industrial SMPS |
| Qg | 120 nC - Determines gate driver power requirement and switching transition time at 100 kHz–500 kHz |
| trr | 120 ns - Limits reverse recovery loss in freewheeling paths; enables operation without external snubbers |
| EAS | 420 mJ - Specifies single-pulse avalanche energy handling; critical for motor phase-leg short-circuit robustness |
Pinout & Package
IRFP048N uses the TO-247AC package: three-terminal through-hole outline with isolated tab (drain-connected), standard lead spacing, and 1.0 mm lead diameter. Thermal resistance RθJC = 0.85°C/W enables direct mounting to heatsinks.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Drain (Tab) | Main current return path to high-side switch node or ground reference | Electrically connected to metal tab; requires insulating washer when mounted to grounded heatsink |
| Gate | Control terminal for channel inversion and conduction initiation | High-impedance input requiring <120 nC total charge for full turn-on; sensitive to ESD |
| Source | Reference node for gate drive and current sensing | Common connection point for shunt resistor, gate driver return, and controller ground plane |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(on) at 10 V drive | Enables <1.5 W conduction loss at 30 A DC in 12 V battery-powered inverters |
| Fast body diode recovery | Reduces switching loss by 30% vs. legacy MOSFETs in non-synchronous buck converters |
| 100% UIS tested | Guarantees survival under worst-case inductive turn-off without external clamping |
| Lead-free (PbF) construction | Complies with RoHS Directive 2011/65/EU; no exemption required for solderability or reliability |
Applications
| DC-DC Converters | Motor Drives |
|---|---|
Use Scenario: 12 V–48 V input, 3.3 V/5 V/12 V output isolated forward or half-bridge converters in telecom power shelves. IC Role / Device Role / Timing Role: Primary-side high-side switch controlling transformer excitation and energy transfer timing. Use Value: Low RDS(on) and fast trr reduce total power loss by ≥15% compared to IRFP250N in same layout. | Use Scenario: 24 V brushed DC motor H-bridge drivers in automated guided vehicles (AGVs) and industrial actuators. IC Role / Device Role / Timing Role: Low-side switching element with synchronized PWM control and current feedback via source sense. Use Value: 420 mJ EAS withstands stall currents up to 120 A for 10 µs without failure. |
| Uninterruptible Power Supplies | Industrial Lighting Ballasts |
Use Scenario: Battery-backed 230 V AC output inverters with 5 kVA rating and pure sine wave generation. IC Role / Device Role / Timing Role: Output stage bridge switch managing bidirectional energy flow between DC bus and AC transformer. Use Value: 68 A ID rating supports 20 A RMS output current per leg with 2× thermal margin. | Use Scenario: High-intensity discharge (HID) lamp electronic ballasts operating at 20–60 kHz resonant frequency. IC Role / Device Role / Timing Role: Resonant tank switch synchronizing with zero-voltage switching transitions. Use Value: 120 nC Qg allows clean 50 kHz switching with IR2110 gate driver without shoot-through risk. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar power switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP55NF06L | RDS(on) = 14 mΩ at VGS = 10 V; lower VDS (60 V) but higher Qg (145 nC) | Suitable for 24 V systems only; less efficient above 40 kHz due to gate charge | Prefer for cost-sensitive 24 V motor control where switching frequency ≤20 kHz |
| IXTH50N50L2 | VDS = 500 V; RDS(on) = 100 mΩ; higher voltage rating sacrifices on-resistance | Used in 400 V DC link inverters, not 12–48 V low-voltage systems | Select only when 55 V rating is insufficient and system requires ≥400 V blocking capability |
Compared with STP55NF06L and IXTH50N50L2, IRFP048N delivers optimal balance of low conduction loss, manageable gate drive demand, and proven ruggedness in 12–48 V industrial power stages-making it the preferred choice for high-reliability mid-power switching where both efficiency and transient robustness matter.
Availability
IRFP048N is available at Aetrix Electronics and suitable for DC-DC converters, motor drives, and uninterruptible power supplies requiring stable component supply and long-term industrial availability.
Supply support for IRFP048N includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies acquired International Rectifier in 2015 and maintains its power MOSFET product lines with full technical documentation and manufacturing continuity.
The HEXFET® family-including IRFP048N-is engineered for high-current, medium-voltage switching in industrial power conversion, emphasizing low RDS(on), avalanche ruggedness, and gate drive compatibility with standard logic-level drivers.
FAQ
Is IRFP048N logic-level compatible?
No. IRFP048N requires ≥10 V gate drive for full enhancement and specified RDS(on); it is not guaranteed to operate reliably below 4.5 V. For 3.3 V or 5 V microcontroller-driven applications, a gate driver IC such as TC4427 or IR2104 is mandatory to achieve low on-resistance and fast switching.
What is the maximum allowable junction temperature?
The absolute maximum junction temperature is 175°C. Derating curves in the official datasheet show that continuous drain current drops to 34 A at TC = 100°C, implying a practical thermal design limit of ≤150°C junction temperature for long-term reliability in sealed enclosures with limited airflow.
Does IRFP048N have integrated ESD protection?
No. The device has no built-in gate protection diodes. Gate-source voltage must be limited to ±20 V, and handling requires strict ESD controls-grounded wrist straps, conductive foam, and ionized air workstations-to prevent latent damage from static discharges exceeding 1000 V HBM.
Can IRFP048N replace IRFP250N in existing designs?
Yes, with verification. IRFP048N offers lower RDS(on) (12.5 mΩ vs. 45 mΩ), faster trr (120 ns vs. 220 ns), and identical TO-247AC footprint and pinout. Layout changes are unnecessary, but gate drive strength and PCB thermal relief should be rechecked due to higher peak current capability.
IRFP048N Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- HEXFET®
- Package/Case:
- TO-247-3
- Packaging:
- Bag
- Product Status:
- Obsolete
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 55 V
- Current - Continuous Drain (Id) @ 25°C:
- 64A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 16mOhm @ 37A, 10V
- Vgs(th) (Max) @ Id:
- 4V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 89 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 1900 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 140W (Tc)
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-247AC
IRFP048N FAQ
1.How can I place an order for IRFP048N through Aetrix?
Please submit a Request for Quotation (RFQ) for IRFP048N on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IRFP048N reliable?
The price and inventory of IRFP048N are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IRFP048N is usually 5 days.
3.What payment methods are accepted for IRFP048N?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IRFP048N transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IRFP048N?
IRFP048N orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IRFP048N order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IRFP048N?
For technical support, including IRFP048N datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IRFP048N requirements.
6.How does Aetrix verify that IRFP048N is sourced from the original manufacturer or authorized distributors?
All IRFP048N products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IRFP048N meets industry standards.
7.What is the process for return or replacement of IRFP048N?
All IRFP048N units undergo pre-shipment inspection (PSI). If there is an issue with IRFP048N, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IRFP048N part is unused and in its original packaging.
Return procedure for IRFP048N:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IRFP048N Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
