My Inquiry
My Account
Taiwan Semiconductor Corporation MBR10150HC0G
- Part No.:
- MBR10150HC0G
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- Single Diodes
- Package:
- TO-220-2
- Datasheet:
-
MBR10150HC0G.pdf
- Description:
- DIODE GEN PURP 150V 10A TO220AC
- Quantity:
- Payment:
- Shipping:
Inventory:6,970
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MBR10150HC0G from Taiwan Semiconductor is a 10A, 150V Schottky barrier rectifier in TO-220AC package, featuring low forward voltage (1.05 V at 10 A, 25°C), high surge current capability (150 A), and AEC-Q101 qualification for automotive-grade reliability. It serves as a primary output rectifier in high-efficiency DC/DC converters and industrial SMPS.
For engineers reviewing the MBR10150HC0G datasheet, MBR10150HC0G pinout, MBR10150HC0G application, or MBR10150HC0G equivalent, key selection criteria include its 150 V repetitive peak reverse voltage, 3°C/W junction-to-case thermal resistance, 105°C maximum operating junction temperature under full load, and compatibility with lead-free reflow soldering per J-STD-002.
Technical Context
This single-die Schottky rectifier uses a guard ring structure to enhance overvoltage ruggedness and suppress leakage-induced thermal runaway. Its low VF and fast recovery (no minority-carrier storage) enable high-frequency switching operation without reverse recovery loss.
Designed for unidirectional conduction in hard-switched topologies, it operates across -55°C to +150°C junction range and supports 0.56 N·m mounting torque on heatsink-compatible TO-220AC leads. The device meets RoHS and halogen-free requirements per IEC 61249-2-21.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 150 V - Maximum repetitive reverse blocking voltage; defines safe DC/peak AC input voltage limit before breakdown |
| IF | 10 A - Continuous average forward current at case temperature ≤75°C; determines heatsink sizing in steady-state operation |
| IFSM | 150 A - Non-repetitive surge current (8.3 ms half-sine); withstands inrush and fault transients without bond wire fusing |
| VF @ 10A, 25°C | 1.05 V - Forward voltage drop; directly sets conduction loss (10.5 W at 10 A) and thermal design margin |
| RθJC | 3°C/W - Junction-to-case thermal resistance; enables direct calculation of junction temperature rise above heatsink temperature |
| IR @ 150V, 25°C | 100 µA - Reverse leakage current; impacts standby power and high-impedance bias networks |
| TJ max | +150°C - Maximum allowable junction temperature; constrains maximum allowable power dissipation under derating curves |
Pinout & Package
Package: TO-220AC - Insulated case with single vertical tab, matte tin-plated leads, UL 94V-0 molding compound, and polarity marking on body.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (Lead 1) | Input current terminal | Connected to higher-potential node (e.g., transformer secondary or switch node); carries full forward current |
| Cathode (Lead 2) | Output current terminal | Connected to output capacitor or filter inductor; referenced as ground/common return in many topologies |
| Case / Tab | Thermal path only | Electrically isolated from die; used for mechanical mounting and heatsinking; no electrical connection required |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive underhood applications including engine control units and ADAS power supplies |
| Guard ring structure | Improves edge termination robustness against voltage transients and localized field crowding |
| 150 A surge rating | Supports repeated cold-start surges and short-circuit recovery without parametric shift or failure |
| Halogen-free construction | Complies with IEC 61249-2-21; eliminates corrosive gas emission during PCB rework or fire events |
| JESD 201 Class 2 whisker resistance | Prevents tin whisker growth under thermal cycling, ensuring long-term solder joint integrity |
Applications
| Server Power Supply | Automotive DC/DC Converter |
|---|---|
Use Scenario: Primary-side synchronous rectification in 48 V–12 V buck converters for data center rack PSUs. IC Role / Device Role / Timing Role: Output rectifier handling continuous 10 A load with minimal conduction loss. Use Value: 1.05 V VF reduces power loss by ~1.2 W vs. comparable 1.2 V devices, lowering heatsink mass and improving system efficiency. | Use Scenario: 12 V auxiliary supply in electric power steering (EPS) modules. IC Role / Device Role / Timing Role: Input rectifier converting alternator AC to regulated DC bus under wide temperature (-40°C to +125°C ambient). Use Value: AEC-Q101 qualification and 150°C TJ max ensure functional safety compliance and lifetime reliability in vibration-prone environments. |
| Industrial Motor Drive | Telecom Rectifier Module |
Use Scenario: Auxiliary power supply rectification in variable frequency drives powering HVAC compressors. IC Role / Device Role / Timing Role: High-current freewheeling path during IGBT turn-off transitions. Use Value: 150 A IFSM withstands motor stall surges without degradation, eliminating need for parallel devices. | Use Scenario: Output stage rectification in -48 V telecom rectifier bricks. IC Role / Device Role / Timing Role: Main DC output rectifier delivering up to 10 A to distributed load management circuits. Use Value: 3°C/W RθJC enables direct mounting to chassis with <10°C rise at full load, simplifying thermal design. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay VS-MBR10150CT | TO-220AB dual common-cathode configuration; VF = 1.05 V @ 10 A, but requires two diodes per channel | Not suitable for single-anode/cathode layouts; intended for center-tapped transformer outputs | Select only if circuit topology uses dual-output or center-tapped windings |
| ON Semiconductor MBR10150CT | TO-220AB package; same VF and VRRM, but not AEC-Q101 qualified; RθJC = 3.5°C/W | Lacks automotive qualification; slightly higher thermal resistance increases heatsink requirement | Acceptable for industrial non-automotive use where qualification and thermal margin allow |
Compared with VS-MBR10150CT and MBR10150CT, the MBR10150HC0G provides verified AEC-Q101 compliance, TO-220AC single-diode layout, and tighter thermal resistance-making it optimal for space-constrained automotive and industrial rectifier designs requiring single-device simplicity and qualification assurance.
Availability
MBR10150HC0G is available at Aetrix Electronics and suitable for server power supplies, automotive DC/DC converters, and industrial motor drives requiring stable component supply, long-lifecycle support, and traceable sourcing.
Supply support for MBR10150HC0G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, serving global industrial, computing, and automotive markets since 1979.
The MBR10150HC0G belongs to TSC's AEC-Q101-qualified Schottky rectifier product line, engineered for high-efficiency, high-reliability power conversion in thermally demanding and safety-critical applications.
FAQ
What is the maximum junction temperature rating for MBR10150HC0G?
The MBR10150HC0G has a maximum junction temperature (TJ max) of +150°C. This rating allows sustained operation under high ambient conditions when properly heatsinked. Derating curves in the official datasheet define allowable forward current versus case temperature, and operation beyond +150°C risks irreversible parametric shift or thermal runaway. Always verify actual TJ using RθJC = 3°C/W and measured case temperature.
Is MBR10150HC0G pin-compatible with standard TO-220AC rectifiers?
Yes, MBR10150HC0G uses the industry-standard TO-220AC outline with Anode (Lead 1), Cathode (Lead 2), and insulated tab. Its pinout matches all TO-220AC single-diode rectifiers, including legacy silicon and Schottky types. Mounting hole spacing, lead pitch, and thermal pad geometry conform to JEDEC TO-220AC specifications, enabling direct replacement in existing footprints.
Does MBR10150HC0G meet automotive qualification standards?
Yes, the "H" suffix in MBR10150HC0G denotes AEC-Q101 qualification. This certification confirms rigorous stress testing-including temperature cycling, humidity bias HAST, and ESD-per automotive electronics reliability requirements. The device is approved for use in engine control, body electronics, and ADAS power stages where extended temperature operation and long-term stability are mandatory.
What is the forward voltage of MBR10150HC0G at 10 A and 125°C?
The MBR10150HC0G forward voltage at 10 A and 125°C is not specified in the published datasheet. Only the 25°C value (1.05 V max) is guaranteed. At elevated temperatures, VF decreases due to Schottky barrier physics; typical behavior shows ~0.75–0.85 V in this condition, but designers must rely on characterization data or apply worst-case 25°C specs for safety-critical margining.
How does the guard ring feature improve reliability in MBR10150HC0G?
The guard ring in MBR10150HC0G enhances edge termination robustness by distributing electric field gradients away from the active junction periphery. This reduces localized avalanche and prevents premature reverse breakdown during voltage transients or manufacturing defects. In practice, it improves surge survivability and long-term stability under repetitive overvoltage stress-critical in SMPS with poor input filtering or inductive load switching.
MBR10150HC0G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Series:
- -
- Package/Case:
- TO-220-2
- Packaging:
- Tube
- Product Status:
- Discontinued at Digi-Key
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 150 V
- Current - Average Rectified (Io):
- 10A
- Voltage - Forward (Vf) (Max) @ If:
- 1.05 V @ 10 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 100 µA @ 150 V
- Capacitance @ Vr, F:
- -
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220AC
- Operating Temperature - Junction:
- -55°C ~ 150°C
MBR10150HC0G FAQ
1.How can I place an order for MBR10150HC0G through Aetrix?
Please submit a Request for Quotation (RFQ) for MBR10150HC0G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MBR10150HC0G reliable?
The price and inventory of MBR10150HC0G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MBR10150HC0G is usually 5 days.
3.What payment methods are accepted for MBR10150HC0G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MBR10150HC0G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MBR10150HC0G?
MBR10150HC0G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MBR10150HC0G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MBR10150HC0G?
For technical support, including MBR10150HC0G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MBR10150HC0G requirements.
6.How does Aetrix verify that MBR10150HC0G is sourced from the original manufacturer or authorized distributors?
All MBR10150HC0G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MBR10150HC0G meets industry standards.
7.What is the process for return or replacement of MBR10150HC0G?
All MBR10150HC0G units undergo pre-shipment inspection (PSI). If there is an issue with MBR10150HC0G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MBR10150HC0G part is unused and in its original packaging.
Return procedure for MBR10150HC0G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MBR10150HC0G Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
