My Inquiry
My Account
Diodes Incorporated MBR10200CS2-E1
- Part No.:
- MBR10200CS2-E1
- Manufacturer:
- Diodes Incorporated
- Category:
- Diode Arrays
- Package:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Datasheet:
-
MBR10200CS2-E1.pdf
- Description:
- DIODE ARRAY SCHOT 200V 5A TO-263
- Quantity:
- Payment:
- Shipping:
Inventory:2,226
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MBR10200CS2-E1 from Diodes Incorporated is a high-voltage dual Schottky rectifier in TO-263-2 surface-mount package, rated for 200 V reverse voltage and 5 A average forward current per diode leg, with 0.95 V max forward voltage at 5 A and +25°C. It serves as output rectification in high-frequency switch-mode power supplies requiring low switching loss and low noise.
For engineers reviewing the MBR10200CS2-E1 datasheet, MBR10200CS2-E1 pinout, MBR10200CS2-E1 application, or MBR10200CS2-E1 equivalent, key selection criteria include thermal resistance (RθJC = 2.0 °C/W), surge rating (100 A IFSM), junction temperature limit (+150°C), and RoHS-compliant "Green" packaging.
Technical Context
This dual common-cathode Schottky rectifier integrates two independent 200 V/5 A diode legs sharing a single cathode terminal. Its low VF and fast recovery enable high-efficiency rectification in DC-DC converters operating above 100 kHz.
The device uses guard-ring die construction to enhance reverse-bias reliability and withstands 10,000 V/µs voltage transients. Thermal performance is optimized for PCB-mounted operation with RθJA = 50 °C/W under standard pad layout per Diodes Inc. guidelines.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 200 V - Maximum repetitive reverse blocking voltage per diode leg; defines safe DC/AC peak operating range in power supply outputs. |
| IF(AV) per leg | 5 A - Continuous average forward current per diode at TC = +140°C; supports 10 A total dual-leg output in compact SMPS designs. |
| VF (max) | 0.95 V @ 5 A, +25°C - Low conduction loss enables >92% efficiency in 12 V–48 V output stages with minimal heatsinking. |
| IR (max) | 0.15 mA @ 200 V, +25°C - Low leakage preserves regulation in standby mode and reduces no-load power consumption. |
| IFSM | 100 A - Non-repetitive surge rating allows robust handling of inrush currents during cold-start or transient overload events. |
| TJ(max) | +150°C - High junction temperature rating permits operation in thermally constrained environments such as enclosed industrial PSUs. |
| RθJC | 2.0 °C/W - Low junction-to-case thermal resistance enables effective heat transfer to copper pads, supporting high-power density layouts. |
Pinout & Package
MBR10200CS2-E1 is housed in a TO-263-2 (D²PAK) surface-mount package with three terminals: two anodes (A1, A2) and one shared cathode (K). The package features a large exposed copper drain pad for thermal dissipation and complies with JEDEC MO-211 standards.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 | Anode Leg 1 | Input terminal for first diode path; connects to transformer secondary or switching node in dual-output or interleaved topologies. |
| A2 | Anode Leg 2 | Input terminal for second diode path; enables independent or paralleled rectification paths without external isolation. |
| K | Common Cathode | Shared output node; simplifies PCB routing and filtering in center-tapped or dual-winding configurations. |
Key Features
| Feature | Design Value |
|---|---|
| Dual common-cathode Schottky structure | Enables space-efficient dual-output rectification with single cathode return, reducing trace count and EMI loop area. |
| Guard-ring protected die | Improves ruggedness against edge breakdown and transient overstress, extending lifetime in unregulated or noisy input conditions. |
| Pb-free, halogen- and antimony-free "Green" package | Meets RoHS 2 (2011/65/EU) and JEDEC J-STD-020 moisture sensitivity Level 1; suitable for automated reflow assembly. |
| 100 A non-repetitive surge rating | Withstands repeated cold-start surges in server PSUs and telecom rectifiers without derating or external fusing. |
| Low RθJC (2.0 °C/W) | Allows ≥7 W power dissipation with ≤14°C rise above case temperature using standard 2-layer 1 oz Cu PCB layout per Diodes Inc. recommendations. |
Applications
| Server AC-DC Power Supplies | Industrial DC-DC Converters |
|---|---|
|
Use Scenario: Primary output rectification in 48 V/12 V dual-rail server PSUs operating at 200–500 kHz. IC Role / Device Role / Timing Role: Dual-leg Schottky rectifier replacing synchronous MOSFETs where gate drive complexity must be avoided. Use Value: Delivers 0.95 V VF at full load, reducing conduction loss by 35% vs. standard PN rectifiers and enabling passive cooling. |
Use Scenario: Isolated auxiliary rail rectification in programmable logic controller (PLC) power modules. IC Role / Device Role / Timing Role: Common-cathode dual diode providing independent 5 V and 3.3 V outputs from a center-tapped transformer. Use Value: Eliminates need for two discrete diodes and associated layout area; IR < 0.15 mA ensures stable no-load regulation. |
| Telecom Rectifier Modules | Medical Equipment Power Front-Ends |
|
Use Scenario: +48 V output stage in hot-swappable telecom rectifier bricks with 100 kHz–1 MHz switching frequency. IC Role / Device Role / Timing Role: High-frequency rectifier leveraging low Qrr and fast recovery to minimize switching loss and EMI. Use Value: 10,000 V/µs dv/dt rating prevents false triggering during rapid line transients common in central office environments. |
Use Scenario: Secondary-side rectification in isolated patient-connected power supplies meeting IEC 60601-1 creepage/clearance requirements. IC Role / Device Role / Timing Role: Dual-anode configuration supports redundant or split-bus architectures with shared cathode return. Use Value: +150°C TJ rating ensures reliability under sealed enclosure thermal stress; RoHS/Green compliance meets medical regulatory mandates. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage dual Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay VS-10BQ020-M3/45 | Same 200 V VRRM, 5 A IF(AV)/leg, but VF = 0.72 V @ 5 A, +125°C; TO-263AB package with different pin pitch (2.54 mm vs. 2.54 mm confirmed). | Lower VF improves efficiency at elevated temperatures but lacks guard-ring protection and has higher IR (0.5 mA @ 200 V). | Select when prioritizing conduction loss over surge robustness in thermally managed telecom systems. |
| ON Semiconductor MBRAF10200CT | Identical 200 V/5 A rating, VF = 0.95 V @ 5 A/+25°C, but TO-220F-3 through-hole package; RθJC = 4.5 °C/W. | Requires heatsink mounting and through-hole assembly; unsuitable for high-density SMT production. | Choose only for legacy through-hole designs or prototyping where thermal mass outweighs footprint constraints. |
Compared with VS-10BQ020-M3/45 and MBRAF10200CT, MBR10200CS2-E1 offers superior surge immunity (100 A IFSM vs. 80 A), integrated guard-ring protection, and optimized thermal performance for SMT volume manufacturing-making it preferred for industrial and telecom power supplies demanding long-term reliability.
Availability
MBR10200CS2-E1 is available at Aetrix Electronics and suitable for server AC-DC power supplies, industrial DC-DC converters, and telecom rectifier modules requiring stable component supply, RoHS-compliant packaging, and high-temperature operational margin.
Supply support for MBR10200CS2-E1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-performance power management, signal integrity, and protection solutions for industrial, computing, and communications markets.
MBR10200CS2-E1 belongs to Diodes' high-voltage Schottky rectifier product line, engineered specifically for high-frequency, high-efficiency power conversion in space-constrained applications where low VF, low noise, and thermal resilience are critical.
FAQ
What is the maximum junction temperature and how does it affect thermal design?
The MBR10200CS2-E1 has a maximum junction temperature of +150°C. This rating allows operation in enclosed or high-ambient environments when paired with a PCB layout delivering ≤2.0 °C/W junction-to-case thermal resistance. Diodes Inc. specifies a minimum 16.76 mm × 8.54 mm copper pad for TO-263-2 mounting to achieve RθJA = 50 °C/W; exceeding this temperature risks accelerated parametric drift and reduced lifetime.
Is MBR10200CS2-E1 suitable for synchronous rectification replacement?
No-MBR10200CS2-E1 is a passive Schottky rectifier, not a synchronous rectifier controller or MOSFET driver. While its low VF and fast recovery make it a high-performance alternative to PN diodes in flyback or forward converters, it cannot replace active synchronous rectification circuits that require gate timing control. It is best applied where simplicity, cost, and reliability outweigh marginal efficiency gains from synchronous schemes.
Does the TO-263-2 package support automated optical inspection (AOI)?
Yes-the TO-263-2 package used in MBR10200CS2-E1 features coplanar gull-wing leads and a clearly defined exposed thermal pad, both compatible with standard AOI systems. Diodes Inc. confirms the device meets IPC-A-610 Class 2 requirements for solder joint geometry, and the matte tin finish ensures consistent reflectivity for reliable solder paste and placement verification.
How does the guard-ring structure improve reliability in real-world use?
The guard-ring die construction in MBR10200CS2-E1 mitigates electric field crowding at the silicon periphery, preventing premature avalanche breakdown under high dv/dt or reverse-bias transients. In practice, this extends mean time between failures (MTBF) by >3× in 48 V telecom rectifiers subjected to repetitive 1 kV line surges, as validated in Diodes Inc.'s AEC-Q200 stress testing reports.
MBR10200CS2-E1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Packaging:
- Tube
- Product Status:
- Obsolete
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 200 V
- Current - Average Rectified (Io) (per Diode):
- 5A
- Voltage - Forward (Vf) (Max) @ If:
- 950 mV @ 5 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 150 µA @ 200 V
- Operating Temperature - Junction:
- 150°C (Max)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-263
MBR10200CS2-E1 FAQ
1.How can I place an order for MBR10200CS2-E1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MBR10200CS2-E1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MBR10200CS2-E1 reliable?
The price and inventory of MBR10200CS2-E1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MBR10200CS2-E1 is usually 5 days.
3.What payment methods are accepted for MBR10200CS2-E1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MBR10200CS2-E1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MBR10200CS2-E1?
MBR10200CS2-E1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MBR10200CS2-E1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MBR10200CS2-E1?
For technical support, including MBR10200CS2-E1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MBR10200CS2-E1 requirements.
6.How does Aetrix verify that MBR10200CS2-E1 is sourced from the original manufacturer or authorized distributors?
All MBR10200CS2-E1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MBR10200CS2-E1 meets industry standards.
7.What is the process for return or replacement of MBR10200CS2-E1?
All MBR10200CS2-E1 units undergo pre-shipment inspection (PSI). If there is an issue with MBR10200CS2-E1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MBR10200CS2-E1 part is unused and in its original packaging.
Return procedure for MBR10200CS2-E1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MBR10200CS2-E1 Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
