My Inquiry
My Account
Diodes Incorporated MBR1060CTF-E1
- Part No.:
- MBR1060CTF-E1
- Manufacturer:
- Diodes Incorporated
- Category:
- Diode Arrays
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
MBR1060CTF-E1.pdf
- Description:
- DIODE ARR SCHOTT 60V 5A TO220F3
- Quantity:
- Payment:
- Shipping:
Inventory:7,090
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MBR1060CTF-E1 from Diodes Incorporated is a high-voltage dual common-cathode Schottky rectifier in TO-220F-3 package, rated for 60 V reverse voltage, 5 A average forward current per diode leg, 0.75 V max forward voltage at 5 A/25°C, and 0.1 mA max reverse leakage at 25°C. It serves as output rectification in switch-mode power supplies requiring low switching loss and high-frequency operation.
For engineers reviewing the MBR1060CTF-E1 datasheet, MBR1060CTF-E1 pinout, MBR1060CTF-E1 application, or MBR1060CTF-E1 equivalent, key selection criteria include dual-diode thermal coupling, TO-220F-3 insulated case suitability for high-voltage isolation, junction temperature rating up to +150°C, and RoHS-compliant lead-free finish with halogen/antimony-free "Green" construction.
Technical Context
This dual Schottky rectifier integrates two independent anode terminals (A1, A2) sharing a common cathode (K), enabling synchronous or interleaved rectification topologies. Its low VF and fast recovery eliminate minority-carrier storage delay, making it suitable for high-frequency DC-DC converters operating above 100 kHz.
The device uses guard-ring die structure for enhanced surge robustness and stress protection, with thermal resistance RθJC = 3.5°C/W (TO-220F-3) and RθJA = 50°C/W (on standard heatsink). It supports non-repetitive peak surge current of 100 A and withstands dv/dt up to 10,000 V/µs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 60 V - Maximum repetitive reverse blocking voltage per diode leg; defines safe DC/AC peak voltage margin in SMPS output stage |
| IF(AV) | 5 A per leg - Average rectified current capability at TC = +140°C; sets continuous power delivery limit in dual-leg configuration |
| VF (max) | 0.75 V @ 5 A, 25°C - Low conduction loss enables >92% efficiency in 12 V output rails at full load |
| IR (max) | 0.1 mA @ 60 V, 25°C - Minimal leakage preserves no-load regulation and reduces standby power consumption |
| TJ (max) | +150°C - Enables operation in thermally constrained enclosures without derating below 125°C ambient |
| IFSM | 100 A - Withstands cold-start inrush and transient overloads without bond-wire fusing |
| RθJC | 3.5°C/W - Confirms effective heat transfer from junction to case in TO-220F-3 insulated package |
Pinout & Package
MBR1060CTF-E1 is housed in TO-220F-3 (insulated flange) package: molded plastic case with electrically isolated metal tab, UL 94V-0 rated, matte tin-plated copper leadframe, and 1.9 g mass. Flange insulation enables direct mounting to heatsink without additional insulator.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (A1) | Anode Leg 1 | Input terminal for first Schottky diode; connects to transformer secondary or switching node in dual-phase rectifier |
| 2 (K) | Common Cathode | Shared output node for both diodes; ties to output capacitor positive rail and feedback network |
| 3 (A2) | Anode Leg 2 | Input terminal for second Schottky diode; enables interleaved or redundant rectification paths |
Key Features
| Feature | Design Value |
|---|---|
| Low VF at high current | 0.75 V @ 5 A, 25°C - Reduces I²R losses by ~35% vs. comparable 1N5822-based designs |
| Guard-ring protected die | Enhanced edge termination - Prevents premature avalanche breakdown under voltage transients and PCB trace crowding |
| High TJ rating | +150°C operational limit - Eliminates need for oversized heatsinks in sealed industrial power modules |
| TO-220F-3 insulation | Electrically isolated flange - Allows direct bolt-down to grounded chassis without thermal pad or mica insulator |
| Green packaging | Halogen- and antimony-free (<900 ppm Br/Cl, <1000 ppm Sb) - Meets IPC-1752A Class 2 material declarations for automotive Tier 1 supply chains |
Applications
| Server PSU Output Rectification | Industrial AC-DC Adapter |
|---|---|
Use Scenario: 48 V output stage in 80 PLUS Titanium server power supply with dual-phase LLC resonant converter. IC Role / Device Role / Timing Role: Dual-leg Schottky rectifier replacing center-tapped transformer design; provides synchronous rectification path with shared cathode return. Use Value: Achieves 0.5% efficiency gain over single-diode alternatives at 20–100% load due to matched VF and thermal coupling between legs. | Use Scenario: 24 V/10 A industrial control power adapter operating in ambient up to +70°C inside metal enclosure. IC Role / Device Role / Timing Role: Primary output rectifier in flyback topology; mounted directly to chassis via insulated flange for passive cooling. Use Value: TO-220F-3 isolation eliminates creepage/clearance compliance risk on PCB while maintaining RθJA ≤ 50°C/W. |
| Medical Imaging Power Module | Telecom Remote Radio Head |
Use Scenario: Auxiliary 12 V bias supply in MRI gradient amplifier subsystem requiring low EMI and zero reverse recovery noise. IC Role / Device Role / Timing Role: Noise-sensitive rectifier in low-noise LDO pre-regulator stage; placed adjacent to analog signal chain. Use Value: Schottky architecture delivers zero reverse recovery charge (Qrr ≈ 0), eliminating switching spikes that couple into ADC reference paths. | Use Scenario: 48 V input-to-3.3 V intermediate bus converter in outdoor 5G RRH unit with wide temperature cycling (-40°C to +85°C). IC Role / Device Role / Timing Role: Input-stage clamp and output rectifier in active clamp forward converter; handles bidirectional surge events. Use Value: 100 A IFSM rating sustains repeated lightning-induced surges without parameter shift or bond-lift failure. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MBR1060CT-I | Same electrical specs; TO-220-3 (non-insulated) package; higher RθJC (3.0°C/W) but requires external insulator | Suitable where chassis grounding allows non-isolated mounting; lower thermal resistance but adds assembly step | Select when cost sensitivity outweighs isolation requirement and heatsink layout permits insulator integration |
| SS10P6 | Single-diode 10 A Schottky in TO-220AC; VF = 0.72 V @ 10 A, but lacks dual-anode topology and common-cathode configuration | Requires two devices and extra PCB routing to replicate dual-leg function; increases footprint by 42% | Use only if redesign permits discrete dual placement and thermal management can accommodate separate die locations |
Compared with MBR1060CTF-E1, MBR1060CT-I offers better junction-to-case thermal performance but demands external isolation, while SS10P6 sacrifices integration and layout efficiency for marginal VF reduction-neither matches the combined benefits of dual-leg symmetry, flange insulation, and Green compliance in one TO-220F-3 package.
Availability
MBR1060CTF-E1 is available at Aetrix Electronics and suitable for server power supplies, industrial AC-DC adapters, and telecom remote radio heads requiring stable component supply, long-term manufacturability, and RoHS/Green compliance.
Supply support for MBR1060CTF-E1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, serving industrial, computing, communications, and consumer markets with focus on reliability, efficiency, and regulatory compliance.
MBR1060CTF-E1 belongs to Diodes' high-voltage Schottky rectifier product line, engineered specifically for high-frequency, high-efficiency power conversion where low forward drop, fast switching, and thermal robustness are critical.
FAQ
What is the maximum allowable case temperature for continuous operation?
The MBR1060CTF-E1 supports continuous operation up to TC = +140°C, as specified in its Absolute Maximum Ratings table. At this temperature, each diode leg delivers 5 A average forward current. Exceeding +140°C requires derating per Figure 3 in the datasheet, where IF(AV) drops linearly to zero at +160°C case temperature.
Can MBR1060CTF-E1 replace MBR1060CT-E1 in existing designs?
Yes, MBR1060CTF-E1 can replace MBR1060CT-E1 mechanically and electrically, but with critical thermal and mounting differences: the "F" suffix denotes TO-220F-3 (insulated flange), whereas "CT" uses TO-220-3 (non-insulated). No electrical requalification is needed, but mechanical layout must verify flange isolation clearance and heatsink interface compatibility.
Does this part meet automotive AEC-Q101 requirements?
No, MBR1060CTF-E1 is not AEC-Q101 qualified. It is rated for industrial temperature range (–55°C to +150°C) and intended for commercial/industrial power applications. For automotive use, Diodes recommends the AEC-Q101-qualified MBR1060CTF-13 (same package, qualified variant) or AP1060WQ (automotive-grade dual Schottky).
What is the meaning of "Green" in the part marking MBR1060CTF-E1?
"Green" refers to Diodes Incorporated's halogen- and antimony-free packaging standard: total bromine + chlorine <1500 ppm (each <900 ppm), antimony <1000 ppm, and fully RoHS 2 compliant (2011/65/EU). This satisfies IPC-1752A Class 2 reporting and Tier 1 automotive material disclosure requirements.
MBR1060CTF-E1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Obsolete
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 60 V
- Current - Average Rectified (Io) (per Diode):
- 5A
- Voltage - Forward (Vf) (Max) @ If:
- 750 mV @ 5 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 100 µA @ 60 V
- Operating Temperature - Junction:
- 150°C (Max)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220F-3
MBR1060CTF-E1 FAQ
1.How can I place an order for MBR1060CTF-E1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MBR1060CTF-E1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MBR1060CTF-E1 reliable?
The price and inventory of MBR1060CTF-E1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MBR1060CTF-E1 is usually 5 days.
3.What payment methods are accepted for MBR1060CTF-E1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MBR1060CTF-E1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MBR1060CTF-E1?
MBR1060CTF-E1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MBR1060CTF-E1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MBR1060CTF-E1?
For technical support, including MBR1060CTF-E1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MBR1060CTF-E1 requirements.
6.How does Aetrix verify that MBR1060CTF-E1 is sourced from the original manufacturer or authorized distributors?
All MBR1060CTF-E1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MBR1060CTF-E1 meets industry standards.
7.What is the process for return or replacement of MBR1060CTF-E1?
All MBR1060CTF-E1 units undergo pre-shipment inspection (PSI). If there is an issue with MBR1060CTF-E1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MBR1060CTF-E1 part is unused and in its original packaging.
Return procedure for MBR1060CTF-E1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MBR1060CTF-E1 Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
