My Inquiry
My Account
Diodes Incorporated MBR30H100CTF-G1
- Part No.:
- MBR30H100CTF-G1
- Manufacturer:
- Diodes Incorporated
- Category:
- Diode Arrays
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
MBR30H100CTF-G1.pdf
- Description:
- DIODE ARR SCHOT 100V 15A TO220F3
- Quantity:
- Payment:
- Shipping:
Inventory:7,099
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MBR30H100CTF-G1 from Diodes Incorporated is a high-voltage dual Schottky rectifier in TO-220F-3 package, rated for 100 V reverse voltage, 15 A average forward current per diode leg (30 A total), and 0.8 V max forward voltage at 15 A and +25°C. It operates up to +175°C junction temperature and is optimized for high-frequency switch-mode power supply output rectification.
For engineers reviewing the MBR30H100CTF-G1 datasheet, MBR30H100CTF-G1 pinout, MBR30H100CTF-G1 application, or MBR30H100CTF-G1 equivalent, key selection criteria include its low VF at high current, 250 A non-repetitive surge rating, guard-ring stress protection, RoHS/Green compliance, and thermal resistance of 2.5 °C/W (junction-to-case).
Technical Context
This dual common-cathode Schottky rectifier integrates two independent 100 V/15 A diode legs sharing a single cathode terminal (Pin 2), enabling synchronous or interleaved output rectification in dual-rail or phase-split DC-DC converters. Its low QRR and absence of minority-carrier storage minimize switching losses and EMI generation.
The device uses platinum-doped silicon with guard-ring termination to suppress edge breakdown under high dv/dt (10,000 V/µs) and high-temperature reverse bias. Thermal design relies on direct case-to-heatsink conduction via the metal tab (Pin 2), with RθJC = 2.5 °C/W specified for TO-220F-3 mounting under defined pad layout conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 100 V - Maximum repetitive reverse voltage each diode leg withstands without breakdown. |
| IF(AV) per leg | 15 A - Continuous DC forward current per diode at TC = +162°C, defining heatsink sizing baseline. |
| VF @ 15A, 25°C | 0.80 V - Forward drop determining conduction loss and thermal load at nominal load. |
| IR @ 25°C | 0.0045 mA - Low leakage ensuring minimal standby power loss in offline supplies. |
| IFSURGE (IFSM) | 250 A - Peak non-repetitive surge current capability during power-up or fault transients. |
| TJ(max) | +175°C - Maximum junction temperature enabling operation in high-ambient industrial environments. |
| RθJC | 2.5 °C/W - Junction-to-case thermal resistance for TO-220F-3, critical for heatsink interface design. |
Pinout & Package
MBR30H100CTF-G1 is housed in a TO-220F-3 (full-pack) plastic package with insulated tab, featuring three leads: Pin 1 (Anode 1), Pin 2 (Common Cathode), Pin 3 (Anode 2). The metal tab is electrically connected to Pin 2 (cathode) and serves as primary thermal path.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode of Diode Leg 1 | Input connection for first rectifier path; isolated from tab and Pin 2 except through internal die. |
| Pin 2 | Common Cathode (Tab-connected) | Shared output node for both diodes; electrically tied to insulated metal tab for thermal transfer. |
| Pin 3 | Anode of Diode Leg 2 | Input connection for second independent rectifier path; symmetrical to Pin 1. |
Key Features
| Feature | Design Value |
|---|---|
| Low VF at high current | 0.80 V @ 15 A, 25°C - Reduces conduction loss by ~30% vs. standard Si rectifiers at same rating. |
| Guard-ring protected junction | Enables stable 100 V blocking with >400 V ESD (MM) and 10,000 V/µs dv/dt immunity. |
| +175°C operating junction | Supports compact thermal design in sealed enclosures or high-ambient industrial power systems. |
| Lead-free & Halogen-free | RoHS 3 compliant with <900 ppm Br/Cl and <1000 ppm Sb - meets automotive and green electronics mandates. |
Applications
| Server VRM Output Rectification | Industrial AC-DC Adapter |
|---|---|
Use Scenario: Dual-phase 12 V output stage in server voltage regulator modules delivering up to 60 A combined. IC Role / Device Role / Timing Role: Dual common-cathode Schottky rectifier providing low-loss, high-efficiency synchronous rectification per phase. Use Value: 0.8 V VF minimizes I²R loss at 15 A/leg, reducing heat sink mass by ~40% versus 1.1 V Si alternatives. | Use Scenario: 24 V/5 A open-frame industrial AC-DC adapter operating continuously at 60°C ambient. IC Role / Device Role / Timing Role: Output rectifier in flyback secondary side, handling continuous 15 A peak currents with low EMI. Use Value: 250 A IFSM withstands cold-start surges; +175°C TJ rating ensures reliability without derating. |
| Telecom Power Shelf | Medical Imaging Power Supply |
Use Scenario: -48 V DC input rectification and isolation in telecom shelf power distribution units. IC Role / Device Role / Timing Role: High-reliability dual-leg rectifier for redundant 12 V/24 V auxiliary rails with tight thermal constraints. Use Value: Guard-ring structure prevents premature edge breakdown under long-term reverse bias and thermal cycling. | Use Scenario: X-ray generator high-voltage DC supply requiring low-noise, low-leakage rectification. IC Role / Device Role / Timing Role: Secondary-side rectifier in resonant LLC converter delivering stable 500 W output. Use Value: 0.0045 mA IR at 25°C limits standby leakage, preserving capacitor hold-up time and system safety margins. |
Availability
MBR30H100CTF-G1 is available at Aetrix Electronics and suitable for industrial AC-DC adapters, telecom power shelves, and medical imaging power supplies requiring stable component supply and long-lifecycle support.
Supply support for MBR30H100CTF-G1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-performance power management, signal integrity, and protection solutions.
The MBR30H100CTF-G1 belongs to Diodes' high-voltage Schottky rectifier product line, engineered specifically for high-efficiency, high-frequency power conversion in space-constrained industrial and telecom applications.
FAQ
What is the thermal resistance from junction to ambient (RθJA) for MBR30H100CTF-G1?
RθJA is not specified for TO-220F-3 in the datasheet because it depends heavily on PCB copper area, heatsink interface, and airflow. Only RθJC = 2.5 °C/W is guaranteed. For system-level thermal modeling, use JEDEC JESD51-2 compliant test board data or perform empirical measurement with the intended mechanical layout.
Is MBR30H100CTF-G1 suitable for automotive applications?
No - MBR30H100CTF-G1 is not AEC-Q101 qualified and is explicitly marked "NOT RECOMMENDED FOR NEW DESIGN." Diodes offers automotive-grade alternatives like the MBR30H100CTFQ-G1 (AEC-Q101 qualified, PPAP-capable) for vehicle applications.
How does the common-cathode configuration affect PCB layout?
The shared cathode (Pin 2) simplifies ground-plane routing and reduces loop area for both rectifier legs, lowering EMI. However, it requires careful thermal pad design: the insulated tab must be soldered to a large copper pour connected to system ground or output rail, with ≥ 25 mm² exposed copper recommended for optimal RθJC performance.
What is the maximum allowable case temperature (TC) for continuous operation?
The absolute maximum case temperature is +162°C, derived from the IF(AV) = 15 A rating condition. Operation above this temperature requires linear derating per the "Average Rectified Forward Current vs. Case Temperature" curve (Figure 4), where IF(AV) drops to zero at TC = +180°C for square-wave conduction.
MBR30H100CTF-G1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Obsolete
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 100 V
- Current - Average Rectified (Io) (per Diode):
- 15A
- Voltage - Forward (Vf) (Max) @ If:
- 800 mV @ 15 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 4.5 µA @ 100 V
- Operating Temperature - Junction:
- -65°C ~ 175°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-220F-3
MBR30H100CTF-G1 FAQ
1.How can I place an order for MBR30H100CTF-G1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MBR30H100CTF-G1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MBR30H100CTF-G1 reliable?
The price and inventory of MBR30H100CTF-G1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MBR30H100CTF-G1 is usually 5 days.
3.What payment methods are accepted for MBR30H100CTF-G1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MBR30H100CTF-G1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MBR30H100CTF-G1?
MBR30H100CTF-G1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MBR30H100CTF-G1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MBR30H100CTF-G1?
For technical support, including MBR30H100CTF-G1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MBR30H100CTF-G1 requirements.
6.How does Aetrix verify that MBR30H100CTF-G1 is sourced from the original manufacturer or authorized distributors?
All MBR30H100CTF-G1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MBR30H100CTF-G1 meets industry standards.
7.What is the process for return or replacement of MBR30H100CTF-G1?
All MBR30H100CTF-G1 units undergo pre-shipment inspection (PSI). If there is an issue with MBR30H100CTF-G1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MBR30H100CTF-G1 part is unused and in its original packaging.
Return procedure for MBR30H100CTF-G1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MBR30H100CTF-G1 Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
