My Inquiry
My Account
Taiwan Semiconductor Corporation MBRS1060 MNG
- Part No.:
- MBRS1060 MNG
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- Single Diodes
- Package:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Datasheet:
-
MBRS1060 MNG.pdf
- Description:
- DIODE SCHOTTKY 60V 10A TO263AB
- Quantity:
- Payment:
- Shipping:
Inventory:6,290
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MBRS1060 MNG from Taiwan Semiconductor is a 10A, 60V Schottky barrier surface-mount rectifier in TO-263AB (D2PAK) package, designed for high-efficiency DC/DC conversion and SMPS secondary-side rectification with low forward voltage (0.80 V at 10A, 25°C) and high surge capability (120 A IFSM). It features guard ring overvoltage protection and moisture sensitivity level 1 compliance.
For engineers reviewing the MBRS1060 MNG datasheet, MBRS1060 MNG pinout, MBRS1060 MNG application, or MBRS1060 MNG equivalent, key selection factors include its 60 V repetitive peak reverse voltage, 175 °C maximum junction temperature, 2 °C/W junction-to-case thermal resistance, and suitability for compact, thermally demanding power supplies requiring low conduction loss.
Technical Context
This Schottky rectifier uses a single-die construction optimized for fast switching and minimal reverse recovery charge-critical for high-frequency (>100 kHz) switch-mode topologies. Its low VF reduces conduction losses, while the guard ring structure enhances ruggedness against transient overvoltage events without external snubbers.
The TO-263AB package provides superior thermal performance versus smaller SMD packages, enabling reliable 10 A continuous operation with proper PCB copper area. Junction-to-ambient thermal resistance is 60 °C/W (typical), and the device operates across -55 °C to +175 °C junction temperature range.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 60 V - Maximum repetitive reverse blocking voltage; defines safe operating limit in DC/DC flyback or synchronous rectifier applications |
| IF | 10 A - Continuous forward current rating at TA = 25°C; derates linearly above 25°C ambient per published curve |
| VF @ 10A, 25°C | 0.80 V - Low conduction loss enables >92% efficiency in 12 V output SMPS at full load |
| IFSM | 120 A - Peak non-repetitive surge current handling; supports inrush and fault transients without failure |
| RθJC | 2 °C/W - Enables direct heat transfer to heatsink or thermal pad; critical for thermal design margin in high-power density layouts |
| TJ max | 175 °C - High-temperature capability allows operation in sealed enclosures or under elevated ambient conditions |
| IR @ 60V, 25°C | ≤100 µA - Low leakage preserves efficiency in standby modes and high-impedance bias networks |
Pinout & Package
Package: TO-263AB (D2PAK), surface-mount, 3-terminal configuration with exposed cathode tab for thermal and electrical connection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Input terminal for forward current flow | Connected to input rail (e.g., transformer secondary or switching node); requires adequate trace width for 10 A |
| Cathode | Output terminal for forward current flow | Exposed metal tab - must be soldered to large copper pour for thermal management and low-inductance return path |
| Case / Tab | Electrically connected to cathode | Provides primary thermal conduction path; not isolated - impacts layout isolation requirements |
Key Features
| Feature | Design Value |
|---|---|
| Guard ring structure | Enhances avalanche ruggedness and prevents premature edge breakdown under voltage transients |
| Moisture sensitivity level 1 | Eliminates need for baking prior to reflow; supports standard automated assembly without special handling |
| Matte tin-plated leads | Ensures reliable solderability per J-STD-002; compatible with lead-free and SnPb processes |
| Halogen-free compound | Meets IEC 61249-2-21; supports environmental compliance for industrial and consumer end equipment |
| UL 94V-0 molding | Provides flame-retardant encapsulation essential for safety-critical power supply certifications |
Applications
| Server VRM Output Rectification | Laptop AC Adapter Secondary Side |
|---|---|
Use Scenario: High-current, high-frequency buck-derived VRM delivering 1–3 V @ up to 100 A to CPU/GPU cores. IC Role / Device Role / Timing Role: Secondary-side synchronous rectifier replacement; conducts during low-side switch ON period. Use Value: 0.80 V VF minimizes conduction loss at 10 A per phase, directly improving VRM efficiency and reducing thermal load on PCB. | Use Scenario: 19 V, 3.42 A adapter converting 100–240 VAC to regulated DC using quasi-resonant flyback topology. IC Role / Device Role / Timing Role: Output rectifier diode on secondary winding; handles continuous 10 A average current with 120 A surge tolerance. Use Value: TO-263AB package and 2 °C/W RθJC enable stable operation without heatsink, reducing BOM cost and board space. |
| Industrial DC/DC Converter | Telecom Power Shelf Rectification |
Use Scenario: 48 V input, 12 V output isolated DC/DC module operating at 250 kHz for factory automation controllers. IC Role / Device Role / Timing Role: Freewheeling diode in active-clamp forward or LLC resonant converter secondary. Use Value: 175 °C TJ max and -55 °C to +175 °C storage range ensure reliability in uncontrolled industrial environments. | Use Scenario: 54 V nominal telecom rectifier board converting -48 VDC backup to 3.3/5/12 V system rails. IC Role / Device Role / Timing Role: Primary output rectifier in redundant hot-swap power modules. Use Value: Guard ring and 10,000 V/μs dv/dt rating withstand bus transients during hot insertion and load dump events. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay VS-MBR1060CT-M3/45 | TO-220AC package; dual common-cathode die; VF = 0.72 V @ 10A, 25°C; IFSM = 150 A | Requires through-hole mounting and larger footprint; higher surge rating but lower thermal conductivity (RθJC ≈ 3.5 °C/W) | Preferred where mechanical robustness and surge margin outweigh SMT density constraints |
| ON Semiconductor MBR1060CT | TO-220AB package; dual common-cathode; VF = 0.75 V @ 10A, 25°C; RθJC = 3.0 °C/W | Not surface-mount; lacks guard ring; moisture sensitivity level unknown | Consider only if legacy through-hole design or dual-diode configuration is required |
Compared with VS-MBR1060CT-M3/45 and MBR1060CT, the MBRS1060 MNG offers superior thermal performance in SMT form factor, guaranteed guard ring protection, and J-STD-020 Level 1 handling-making it optimal for high-density, thermally constrained, and automotive-qualified designs.
Availability
MBRS1060 MNG is available at Aetrix Electronics and suitable for server VRMs, laptop adapters, industrial DC/DC converters, and telecom power shelf rectification requiring stable component supply and long-term production continuity.
Supply support for MBRS1060 MNG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, specializing in power devices, rectifiers, and protection components since 1979.
The MBRS1060 MNG belongs to TSC's MBRS10xx Schottky rectifier family, engineered specifically for high-efficiency, high-reliability secondary-side rectification in compact, high-frequency power supplies targeting industrial, computing, and communications markets.
FAQ
What is the maximum junction temperature rating for MBRS1060 MNG?
The MBRS1060 MNG has a maximum junction temperature (TJ max) of +175 °C, allowing operation in high-ambient environments such as enclosed power supplies or industrial control cabinets. This rating is validated per absolute maximum ratings table and supports extended lifetime at elevated temperatures when thermal design adheres to RθJC = 2 °C/W and recommended PCB copper area. The MBRS1060 MNG must not exceed this limit under any steady-state or transient condition.
Does MBRS1060 MNG have a guard ring structure?
Yes, the MBRS1060 MNG incorporates a guard ring for overvoltage protection, as explicitly stated in the official Taiwan Semiconductor datasheet (Version K2103, Page 1). This feature improves edge termination ruggedness and suppresses premature avalanche breakdown during voltage transients-critical for reliability in flyback and LLC converters. The guard ring is integral to the die design and confirmed for all MBRS10xx variants including MBRS1060 MNG.
What is the forward voltage of MBRS1060 MNG at 10 A and 125 °C?
The forward voltage (VF) of MBRS1060 MNG is 0.70 V maximum at IF = 10 A and TJ = 125 °C, per the Electrical Specifications table (Page 2, Version K2103). This value reflects real-world conduction loss under elevated temperature conditions typical in loaded power supplies. At room temperature (25 °C), VF is 0.80 V max under the same current, confirming the device's positive temperature coefficient behavior.
Is MBRS1060 MNG RoHS and halogen-free compliant?
Yes, MBRS1060 MNG is RoHS compliant and halogen-free per IEC 61249-2-21, as documented in the Features section (Page 1, Version K2103). The molding compound contains no brominated or chlorinated flame retardants, and lead content meets EU RoHS Directive 2011/65/EU limits. This compliance supports global market access for consumer, industrial, and networking equipment.
What packaging format is used for MBRS1060 MNG?
MBRS1060 MNG is supplied in TO-263AB (D2PAK) package and shipped in tape-and-reel format with 800 units per reel, as specified in the Ordering Information section (Page 3, Version K2103). The device marking code "MBRS1060" appears on the top surface, and polarity is indicated by a cathode band. No alternate packaging (e.g., bulk or tube) is listed for this variant.
MBRS1060 MNG Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Series:
- -
- Package/Case:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 60 V
- Current - Average Rectified (Io):
- 10A
- Voltage - Forward (Vf) (Max) @ If:
- 950 mV @ 10 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 100 µA @ 60 V
- Capacitance @ Vr, F:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-263AB (D2PAK)
- Operating Temperature - Junction:
- -55°C ~ 175°C
MBRS1060 MNG FAQ
1.How can I place an order for MBRS1060 MNG through Aetrix?
Please submit a Request for Quotation (RFQ) for MBRS1060 MNG on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MBRS1060 MNG reliable?
The price and inventory of MBRS1060 MNG are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MBRS1060 MNG is usually 5 days.
3.What payment methods are accepted for MBRS1060 MNG?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MBRS1060 MNG transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MBRS1060 MNG?
MBRS1060 MNG orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MBRS1060 MNG order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MBRS1060 MNG?
For technical support, including MBRS1060 MNG datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MBRS1060 MNG requirements.
6.How does Aetrix verify that MBRS1060 MNG is sourced from the original manufacturer or authorized distributors?
All MBRS1060 MNG products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MBRS1060 MNG meets industry standards.
7.What is the process for return or replacement of MBRS1060 MNG?
All MBRS1060 MNG units undergo pre-shipment inspection (PSI). If there is an issue with MBRS1060 MNG, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MBRS1060 MNG part is unused and in its original packaging.
Return procedure for MBRS1060 MNG:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MBRS1060 MNG Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
