My Inquiry
My Account
Nexperia USA Inc. MMBZ27VZLS-QYL
- Part No.:
- MMBZ27VZLS-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SOD-882
- Datasheet:
-
MMBZ27VZLS-QYL.pdf
- Description:
- MMBZ27VZLS-Q/SOD882BD/DFN1006-
- Quantity:
- Payment:
- Shipping:
Inventory:5,714
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MMBZ27VZLS-Q from Nexperia is a low-capacitance, bidirectional ESD protection diode in a DFN1006BD-2 (SOD882BD) package, designed to safeguard single-line high-speed interfaces against ±30 kV IEC 61000-4-2 ESD events. It features a 24 V reverse stand-off voltage, 33 V clamping at 3.5 A, 14 pF capacitance, and AEC-Q101 qualification for automotive ECU signal lines.
For engineers reviewing the MMBZ27VZLS-Q datasheet, MMBZ27VZLS-Q pinout, MMBZ27VZLS-Q application, or MMBZ27VZLS-Q equivalent, this device is selected for high-frequency data line protection where low capacitance, tight clamping, and automotive-grade reliability are mandatory - especially in USB, HDMI, CAN FD, and sensor interface designs.
Technical Context
This bidirectional TVS diode uses dual anti-parallel silicon avalanche structures to clamp both positive and negative transients symmetrically across pins 1 and 2. Its 14 pF capacitance at 0 V bias enables use on 100+ Mbps differential buses without signal integrity degradation.
The device operates with a 25.5–35.5 V breakdown voltage (IR = 10 mA), maintains ≤50 nA leakage at 24 V, and sustains 150 °C junction temperature - enabling placement near hot components in engine control or ADAS modules.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Stand-off Voltage (VRWM) | 24 V - Maximum continuous working voltage before conduction; defines safe operating margin for 24 V nominal systems. |
| Clamping Voltage (VCL) | 33 V at 3.5 A (8/20 µs) - Peak voltage seen by protected IC during surge; ensures downstream logic remains within absolute max ratings. |
| ESD Withstand | ±30 kV contact discharge (IEC 61000-4-2) - Meets automotive infotainment and body control module immunity requirements. |
| Capacitance (Cd) | 14 pF at 1 MHz, 0 V - Low enough for USB 2.0 (480 Mbps) and LVDS interfaces without measurable rise-time degradation. |
| Junction Temperature (Tj) | 150 °C - Supports under-hood deployment in powertrain ECUs and radar modules with minimal derating. |
| Package | DFN1006BD-2 (SOD882BD), 1.0 × 0.6 × 0.47 mm - Ultra-compact, side-wettable flank design enables automated optical solder-joint inspection. |
Pinout & Package
DFN1006BD-2 (SOD882BD) is a 2-terminal, leadless surface-mount package with side-wettable flanks for reliable reflow soldering and AOI compatibility. Body dimensions: 1.0 mm × 0.6 mm × 0.47 mm; pitch: 0.65 mm; marking bar indicates cathode orientation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode of Diode 1) | Forms one half of the anti-parallel pair; connects to protected line when used in bidirectional configuration. |
| 2 | K2 (Cathode of Diode 2) | Completes the symmetrical clamping path; ties to GND or common reference to enable dual-polarity transient suppression. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive electronics per stress test standard - eliminates need for additional qualification in Tier-1 ECU designs. |
| Side-wettable flanks | Enables automated optical inspection of solder joints on bottom-side terminations - critical for high-reliability automotive PCB assembly. |
| Bidirectional clamping symmetry | Identical VCL (33 V) and dynamic resistance for +IPPM and −IPPM pulses - preserves signal integrity on AC-coupled or bipolar data lines. |
| Low leakage current | ≤50 nA at VRWM = 24 V - prevents DC loading on high-impedance sensor inputs or battery-backed backup rails. |
Applications
| USB 2.0 Interface Protection | HDMI DDC Channel Protection |
|---|---|
Use Scenario: Protecting USB data lines (D+/D−) in automotive infotainment head units exposed to ESD during connector mating. IC Role / Device Role: Bidirectional transient voltage suppressor placed directly at USB micro-B receptacle. Use Value: 14 pF capacitance avoids signal edge distortion; 33 V clamping keeps USB PHY ICs (e.g., TUSB21x) within safe operating area during ±15 kV contact discharge. |
Use Scenario: Safeguarding HDMI Display Data Channel (DDC) lines (SCL/SDA) in digital instrument clusters. IC Role / Device Role: ESD shunt between DDC bus and chassis ground, located <1 mm from HDMI connector. Use Value: Sub-35 V clamping prevents latch-up in I²C-compatible display controllers; AEC-Q101 rating ensures compliance with ISO 16750-2 pulse testing. |
| Automotive CAN FD Transceiver Line | ADAS Camera Sensor Interface |
Use Scenario: Protecting CAN FD high-speed bus (CANH/CANL) in gateway modules subject to load-dump and ESD coupling. IC Role / Device Role: Secondary ESD clamp parallel to primary common-mode choke, placed adjacent to transceiver pins. Use Value: 24 V VRWM aligns with CAN FD supply rail; bidirectional operation handles both dominant/recessive polarity transients without polarity dependency. |
Use Scenario: Shielding MIPI CSI-2 clock and data lanes in surround-view camera modules mounted on exterior mirrors. IC Role / Device Role: Per-lane ESD protection diode array (one MMBZ27VZLS-Q per lane) at FPC connector entry point. Use Value: 150 °C Tj rating supports operation in sealed mirror housings; 14 pF minimizes jitter on 1.5 GHz pixel clock signals. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor SZ1.5SMC27AQ | Unidirectional, 27 V VBR, 1500 W peak power, DO-214AB package (4.5 × 3.5 mm) | Requires two devices for bidirectional coverage; larger footprint limits routing density on compact camera modules. | Select only if higher peak power (1500 W vs. 115 W) is required and board space permits. |
| Vishay ESDBLE24-2 | Bidirectional, 24 V VRWM, 12 pF, SOD-923 package (1.0 × 0.6 mm), but rated only to 15 kV IEC 61000-4-2 | Lacks AEC-Q101 qualification; not approved for safety-critical automotive domains like powertrain or ADAS. | Acceptable for consumer portable electronics but unsuitable for automotive OEM production. |
Compared with SZ1.5SMC27AQ and ESDBLE24-2, MMBZ27VZLS-Q uniquely combines AEC-Q101 qualification, 30 kV ESD rating, 14 pF capacitance, and ultra-miniature DFN1006BD-2 packaging - making it the only option meeting full automotive signal-line protection requirements in space-constrained layouts.
Availability
MMBZ27VZLS-Q is available at Aetrix Electronics and suitable for automotive electronic control units, high-speed interface protection, and ADAS sensor interface designs requiring stable component supply and long-term lifecycle support.
Supply support for MMBZ27VZLS-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability essential semiconductors - including ESD protection, logic, MOSFETs, and bipolar transistors - with manufacturing rooted in process excellence and automotive-grade quality systems.
MMBZ27VZLS-Q belongs to Nexperia's Automotive-Qualified ESD Protection Diode product line, engineered specifically for robust, low-capacitance transient suppression in safety-critical vehicle subsystems such as infotainment, ADAS, and body electronics.
FAQ
What is the maximum allowable peak pulse current for MMBZ27VZLS-Q?
The rated peak pulse current (IPPM) is 3.5 A under 8/20 µs waveform conditions per IEC 61000-4-5. This value is confirmed in Table 1 and Table 5 of the official Nexperia datasheet dated 19 July 2024. Exceeding this current risks irreversible parametric shift or thermal failure.
Can MMBZ27VZLS-Q be used on a 3.3 V logic line?
No - its 24 V reverse stand-off voltage (VRWM) and 25.5–35.5 V breakdown range make it unsuitable for direct protection of 3.3 V or 5 V I/O. For those rails, Nexperia's PESD5V0S1BA (5 V VRWM) or similar low-voltage ESD diodes are recommended instead.
Does the DFN1006BD-2 package support automated optical inspection (AOI)?
Yes - the side-wettable flanks (SWF) on the DFN1006BD-2 package allow solder fillet imaging during AOI. This is explicitly stated in Section 6 (Ordering Information) and Figure 9 (Package Outline) of the datasheet, enabling reliable process control in automotive PCB assembly lines.
Is MMBZ27VZLS-Q compatible with lead-free reflow profiles?
Yes - the device is qualified for standard JEDEC J-STD-020D reflow profiles, including peak temperatures up to 260 °C. Footprint recommendations in Figure 10 and soldering guidelines in Section 13 confirm compatibility with lead-free SAC305 paste and typical 60–90 second time-above-liquidus cycles.
MMBZ27VZLS-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SOD-882
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 27V (Max)
- Voltage - Breakdown (Min):
- 28V
- Voltage - Clamping (Max) @ Ipp:
- 45V
- Current - Peak Pulse (10/1000µs):
- 3A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 14pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN1006BD-2
MMBZ27VZLS-QYL FAQ
1.How can I place an order for MMBZ27VZLS-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for MMBZ27VZLS-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MMBZ27VZLS-QYL reliable?
The price and inventory of MMBZ27VZLS-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MMBZ27VZLS-QYL is usually 5 days.
3.What payment methods are accepted for MMBZ27VZLS-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MMBZ27VZLS-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MMBZ27VZLS-QYL?
MMBZ27VZLS-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MMBZ27VZLS-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MMBZ27VZLS-QYL?
For technical support, including MMBZ27VZLS-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MMBZ27VZLS-QYL requirements.
6.How does Aetrix verify that MMBZ27VZLS-QYL is sourced from the original manufacturer or authorized distributors?
All MMBZ27VZLS-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MMBZ27VZLS-QYL meets industry standards.
7.What is the process for return or replacement of MMBZ27VZLS-QYL?
All MMBZ27VZLS-QYL units undergo pre-shipment inspection (PSI). If there is an issue with MMBZ27VZLS-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MMBZ27VZLS-QYL part is unused and in its original packaging.
Return procedure for MMBZ27VZLS-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MMBZ27VZLS-QYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
