My Inquiry
My Account
NXP Semiconductors MP3V5010GC6T1
- Part No.:
- MP3V5010GC6T1
- Manufacturer:
- NXP Semiconductors
- Category:
- Pressure Sensors, Transducers
- Package:
- 8-SMD, Gull Wing, Top Port
- Datasheet:
-
MP3V5010GC6T1.pdf
- Description:
- SENSOR 1.45PSIG 0.13" 3.1V 8SOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,019
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP3V5010GC6T1 from Freescale Semiconductor is a gauge-pressure sensor IC with on-chip signal conditioning, temperature compensation, and factory calibration. It delivers a ratiometric analog output (0.1–3.1 V) over 0–10 kPa full-scale range at 3.0 V supply, with ±5.0% accuracy across 0–85°C, and is packaged in thermoplastic (PPS) small-outline case 482A for surface-mount use in medical respiratory systems.
For engineers reviewing the MP3V5010GC6T1 datasheet, MP3V5010GC6T1 pinout, MP3V5010GC6T1 application, or MP3V5010GC6T1 equivalent, this transducer is selected for microcontroller-based pressure sensing where low-offset drift, fast 1.0 ms response time, and stable 7.0 mA supply current are critical to closed-loop feedback integrity in compact PCB layouts.
Technical Context
The MP3V5010GC6T1 integrates a patented silicon shear-stress strain gauge with thin-film metallization and bipolar signal conditioning circuitry on a monolithic die. Its transfer function Vout = VS × (0.09 × P + 0.08) is ratiometric to supply voltage, enabling direct A/D interfacing without external reference scaling.
On-chip temperature compensation operates across –40°C to +125°C, while calibrated offset stability remains within ±0.5%VFSS after 1000-hour pulsed-pressure and thermal cycling tests. The device requires the decoupling network shown in Figure 3 (1.0 μF / 0.01 μF / 470 pF) to meet specified accuracy and noise performance.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Pressure Range | 0–10 kPa (0–1.45 psi); defines usable differential input span before output saturation. |
| Output Voltage | 0.1–3.1 V at VS = 3.0 V; ratiometric linear response enables direct connection to 3.3 V ADC references. |
| Accuracy | ±5.0% of full-scale span (VFSS); includes linearity, temp hysteresis, pressure hysteresis, TcSpan, and TcOffset error components. |
| Response Time | 1.0 ms (10%–90%); supports real-time monitoring in dynamic airflow control loops. |
| Supply Current | 7.0 mA typical; enables low-power battery operation in portable medical devices. |
| Sensitivity | 270 mV/kPa; determines minimum detectable pressure change per ADC LSB at given resolution. |
| Operating Temp | –40°C to +125°C; ensures reliability in HVAC ducts and automotive cabin pressure modules. |
Pinout & Package
MP3V5010GC6T1 uses a thermoplastic (PPS) small-outline package (Case 482A-01), 8-pin surface-mount configuration with pins 1, 5, 6, 7, and 8 designated as no-connects. Pin 1 is GND, pin 2 is +Vout, pin 3 is Vs, and pin 4 is –Vout - supporting single-ended output operation with ground-referenced signal path.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Ground reference for internal signal conditioning and output stage; must be low-impedance return path. |
| 2 | +Vout | Analog output signal terminal; provides 0.1–3.1 V ratiometric voltage proportional to applied pressure. |
| 3 | Vs | Supply input (2.7–3.3 V); powers all internal circuitry including temperature compensation and gain stages. |
| 4 | –Vout | Differential output complement; used only in differential readout configurations; otherwise left open or grounded. |
| 5–8 | No Connect | Internally unconnected; must remain floating - no PCB trace routing or soldering required. |
Key Features
| Feature | Design Value |
|---|---|
| On-chip temperature compensation | Validated over –40°C to +125°C operating range, eliminating need for external thermistor networks or software correction tables. |
| Factory-calibrated offset and span | Delivers 0.1–3.1 V output at 3.0 V supply without user trimming; reduces BOM count and production test time. |
| Patented silicon shear-stress strain gauge | Enables high repeatability and low hysteresis (<±0.5 kPa) under cyclic pressure loading in respiratory applications. |
| Ratiometric output architecture | Output scales linearly with supply voltage variation (2.7–3.3 V), simplifying power design and improving ADC measurement robustness. |
| Fluorosilicone gel isolation | Protects die and wire bonds from moisture and particulates while transmitting pressure signal - certified for dry air media only. |
Applications
| Hospital Beds | HVAC Systems |
|---|---|
|
Use Scenario: Real-time patient weight and position monitoring via mattress-integrated air chambers. IC Role / Device Role / Timing Role: Gauge-pressure transducer measuring chamber inflation pressure to infer load distribution and posture changes. Use Value: Enables early detection of pressure ulcers through sub-1 kPa resolution and ±0.5 kPa long-term offset stability over 1000-hour stress testing. |
Use Scenario: Duct static pressure regulation in commercial rooftop HVAC units. IC Role / Device Role / Timing Role: Closed-loop feedback sensor for variable-air-volume (VAV) damper control. Use Value: Maintains ±5.0% full-scale accuracy across –40°C to +85°C ambient, ensuring consistent airflow setpoint tracking despite seasonal temperature swings. |
| Respiratory Systems | Process Control |
|
Use Scenario: Exhalation pressure monitoring in portable CPAP machines. IC Role / Device Role / Timing Role: Low-latency (1.0 ms response) gauge sensor detecting breath cycle transitions for adaptive pressure support. Use Value: Delivers 270 mV/kPa sensitivity and 7.0 mA supply current, enabling battery-powered operation with <20 ms warm-up time to full specification. |
Use Scenario: Filter clogging detection in industrial compressed-air lines. IC Role / Device Role / Timing Role: Differential pressure monitor across filter elements to trigger maintenance alerts. Use Value: With 75 kPa maximum pressure rating and fluorosilicone gel protection, withstands transient surges while maintaining ±0.5 kPa pressure error band over 0–10 kPa range. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar gauge-pressure sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NXP MPX5010DP | Same 0–10 kPa range and SOIC-8 package, but uses piezoresistive bridge with external op-amp interface; no on-chip signal conditioning. | Requires external amplification and temperature compensation circuitry; increases board area and calibration effort. | Select when legacy NXP ecosystem compatibility or higher custom gain flexibility is prioritized over turnkey integration. |
| TE Connectivity MS5839-02BA | I²C digital output, 0–20 kPa range, integrated ADC and temperature sensor; consumes 1.5 μA in standby. | Eliminates analog signal chain but adds firmware dependency and I²C bus timing constraints. | Select for ultra-low-power battery applications where digital interface and multi-sensor fusion outweigh analog simplicity. |
Compared with MP3V5010GC6T1, the MPX5010DP demands external signal conditioning to achieve comparable accuracy, while the MS5839-02BA trades analog immediacy for digital configurability and lower quiescent current - making MP3V5010GC6T1 optimal for cost-sensitive, microcontroller-based analog front-ends requiring minimal external components.
Availability
MP3V5010GC6T1 is available at Aetrix Electronics and suitable for hospital beds, HVAC systems, and respiratory equipment requiring stable component supply with guaranteed long-term manufacturability and consistent calibration traceability.
Supply support for MP3V5010GC6T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Freescale Semiconductor (now part of NXP Semiconductors) was a leading designer of embedded processors and sensors, known for high-reliability analog and mixed-signal ICs targeting automotive, industrial, and medical markets.
The MP3V5010 series was developed specifically for microcontroller-based pressure measurement in space-constrained, low-power applications - emphasizing factory-calibrated analog output, wide temperature operation, and media-isolated packaging for medical-grade durability.
FAQ
What is the pressure media compatibility of the MP3V5010GC6T1?
The MP3V5010GC6T1 is qualified for use with dry air only. Its fluorosilicone gel die coat isolates the sensing element but does not guarantee compatibility with liquids, oils, or corrosive gases. Using non-dry-air media may degrade long-term accuracy or cause irreversible damage. For alternative media, consult NXP's application engineering team before deployment. The MP3V5010GC6T1 datasheet explicitly states that all reliability testing assumes dry air as the pressure medium.
Does the MP3V5010GC6T1 require external decoupling capacitors?
Yes - the MP3V5010GC6T1 requires the recommended decoupling network shown in Figure 3 of its datasheet: 1.0 μF, 0.01 μF, and 470 pF capacitors between Vs and GND. Omitting these components results in failure to meet ±5.0% accuracy and increased noise susceptibility. This network stabilizes the internal gain stages and suppresses supply-induced ripple on the 0.1–3.1 V output. The MP3V5010GC6T1 specification sheet mandates this configuration for full compliance.
Can the MP3V5010GC6T1 be used in absolute pressure measurement?
No - the MP3V5010GC6T1 is a gauge-pressure sensor, meaning it measures pressure relative to ambient atmospheric pressure via its single port (P1 side). It lacks a sealed vacuum reference cavity required for absolute pressure sensing. The "G" in MP3V5010GC6T1 denotes gauge configuration, and the device marking and footprint match Case 482A, which is exclusively rated for gauge or differential use. For absolute pressure, consider the MP3V5050 series instead of MP3V5010GC6T1.
What is the warm-up time specification for the MP3V5010GC6T1?
The MP3V5010GC6T1 has a maximum warm-up time of 20 ms - defined as the duration required to reach full output voltage specification after pressure stabilization. This parameter ensures rapid system readiness in responsive applications like CPAP triggering or HVAC damper actuation. The value is measured under nominal 3.0 V supply and 25°C ambient conditions, and is independent of supply ramp rate. All MP3V5010GC6T1 units are tested to meet this 20 ms limit before shipment.
Is the MP3V5010GC6T1 RoHS compliant and lead-free?
Yes - the MP3V5010GC6T1 is manufactured in accordance with RoHS Directive 2011/65/EU and is lead-free. Its thermoplastic (PPS) package and matte-tin lead finish meet JEDEC J-STD-020 reflow profiles. The original Freescale documentation confirms compliance for Case 482A packaging, and Aetrix Electronics sources only lot-coded units with full material declarations. No exemptions apply to the MP3V5010GC6T1, and it carries the standard RoHS marking on reel labels and shipping documentation.
MP3V5010GC6T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- MP3V5010
- Package/Case:
- 8-SMD, Gull Wing, Top Port
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Applications:
- Board Mount
- Pressure Type:
- Vented Gauge
- Operating Pressure:
- 1.45PSI (10kPa)
- Output Type:
- Analog Voltage
- Output:
- 0.1 V ~ 3.1 V
- Accuracy:
- ±5%
- Voltage - Supply:
- 2.7V ~ 3.3V
- Port Size:
- Male - 0.13" (3.17mm) Tube
- Port Style:
- Barbless
- Features:
- Temperature Compensated
- Termination Style:
- Gull Wing
- Maximum Pressure:
- 10.88PSI (75kPa)
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- -
MP3V5010GC6T1 FAQ
1.How can I place an order for MP3V5010GC6T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MP3V5010GC6T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP3V5010GC6T1 reliable?
The price and inventory of MP3V5010GC6T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP3V5010GC6T1 is usually 5 days.
3.What payment methods are accepted for MP3V5010GC6T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP3V5010GC6T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP3V5010GC6T1?
MP3V5010GC6T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP3V5010GC6T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP3V5010GC6T1?
For technical support, including MP3V5010GC6T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP3V5010GC6T1 requirements.
6.How does Aetrix verify that MP3V5010GC6T1 is sourced from the original manufacturer or authorized distributors?
All MP3V5010GC6T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP3V5010GC6T1 meets industry standards.
7.What is the process for return or replacement of MP3V5010GC6T1?
All MP3V5010GC6T1 units undergo pre-shipment inspection (PSI). If there is an issue with MP3V5010GC6T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP3V5010GC6T1 part is unused and in its original packaging.
Return procedure for MP3V5010GC6T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP3V5010GC6T1 Tags
-
DPS368XTSA1
Infineon Technologies
-
DPS310XTSA1
Infineon Technologies
-
LPS22HHTR
STMicroelectronics
-
ICP-20100
TDK InvenSense
-
ICP-10110
TDK InvenSense
-
LPS22DFTR
STMicroelectronics
-
LPS22HBTR
STMicroelectronics
-
BMP390
Bosch Sensortec
-
BMP581
Bosch Sensortec
-
BMP384
Bosch Sensortec
-
2511020213301
Würth Elektronik
-
ILPS22QSTR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
