My Inquiry
My Account
NXP Semiconductors MPXM2010GST1
- Part No.:
- MPXM2010GST1
- Manufacturer:
- NXP Semiconductors
- Category:
- Pressure Sensors, Transducers
- Package:
- 5-SMD Module, Top Port
- Datasheet:
-
MPXM2010GST1.pdf
- Description:
- SENSOR 1.45PSIG 0.12" .025V MPAK
- Quantity:
- Payment:
- Shipping:
Inventory:11,524
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPXM2010GST1 from NXP Semiconductors is a silicon piezoresistive gauge pressure sensor in MPAK package, delivering ratiometric voltage output proportional to applied differential pressure up to 10 kPa. It features on-chip temperature compensation over 0 °C to 85 °C, laser-trimmed span/offset calibration, and operates from 10 Vdc supply with 6 mA typical current draw. Used in respiratory diagnostics and air movement control systems where stable low-range pressure sensing is critical.
For engineers reviewing the MPXM2010GST1 datasheet, MPXM2010GST1 pinout, MPXM2010GST1 application, or MPXM2010GST1 equivalent, key selection factors include its 10 kPa full-scale range, ±0.1%VFSS pressure hysteresis, 2.5 mV/kPa sensitivity, 4-pin SOT1673-1 (Case 1320A-02) package, and compatibility with dry clean air media in gauge configuration.
Technical Context
The MPXM2010GST1 integrates a monolithic silicon diaphragm with embedded strain gauges and thin-film resistor networks for direct piezoresistive transduction. Its ratiometric output scales linearly with supply voltage (10–16 Vdc), enabling simplified signal conditioning when referenced to VS.
On-chip temperature compensation corrects both full-scale span (±1.0 %VFSS TCVFSS) and offset (±1.0 mV TCVoff) across 0 °C to 85 °C, achieved via dynamic laser trimming during manufacturing. The device supports only gauge pressure measurement (P1 > P2), with the pressure side identified by the port-attached surface per Case 1320A-02 mechanical outline.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Full-Scale Range | 0–10 kPa gauge pressure - defines maximum measurable differential pressure before nonlinear response or damage risk. |
| Supply Voltage | 10–16 Vdc - ratiometric operation requires stable excitation within this range; exceeding 16 Vdc risks self-heating error. |
| Output Sensitivity | 2.5 mV/kPa - enables direct analog readout with ~25 mV full-scale output at 10 Vdc supply, simplifying ADC interface design. |
| Linearity Error | ±1.0 %VFSS - worst-case deviation from end-point straight-line fit over full pressure range, critical for precision calibration. |
| Pressure Hysteresis | ±0.1 %VFSS - ensures repeatable output when cycling between 0 and 10 kPa at 25 °C, essential for closed-loop control stability. |
| Operating Temp. | −40 °C to +125 °C - wide ambient range supports industrial and medical equipment deployment; compensated range is 0–85 °C. |
| Response Time | 1.0 ms (10–90%) - supports real-time monitoring of rapidly changing airflows, such as in ventilator breath cycles. |
Pinout & Package
MPXM2010GST1 uses the MPAK package (SOT1673-1, Case 1320A-02), a 4-pin surface-mount housing with port-attached pressure side identification per Table 10. The package provides environmental isolation via silicone gel encapsulation while transmitting pressure to the silicon diaphragm.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| GND | Ground reference | Common return path for supply and output; must be low-impedance to minimize noise coupling into differential output. |
| +VOUT | Positive output terminal | Delivers voltage proportional to applied pressure relative to −VOUT; used with instrumentation amplifiers for single-ended conversion. |
| VS | Power supply input | Provides excitation for piezoresistive bridge; output scales ratiometrically with this voltage, reducing supply regulation requirements. |
| −VOUT | Negative output terminal | Completes differential output pair; required for true differential measurement to reject common-mode noise in noisy environments. |
Key Features
| Feature | Design Value |
|---|---|
| Ratiometric output | Output voltage scales linearly with supply voltage (10–16 Vdc), eliminating need for precision voltage references in analog front-end design. |
| On-chip temperature compensation | Span and offset drift limited to ±1.0 %VFSS and ±1.0 mV over 0–85 °C, enabling stable operation without external thermal correction circuitry. |
| Laser-trimmed calibration | Factory-trimmed for precise zero offset and full-scale span, achieving ±1.0 %VFSS linearity and ±0.1 %VFSS hysteresis without user calibration. |
| Gauge pressure configuration | Designed exclusively for P1 > P2 differential measurement with port-attached side as pressure inlet, simplifying mechanical integration in airflow ducts. |
| Media compatibility | Qualified for dry clean air; silicone gel isolation protects die and wire bonds while transmitting pressure signal, ensuring long-term reliability in medical-grade air paths. |
Applications
| Respiratory Diagnostics | Air Movement Control |
|---|---|
Use Scenario: Monitoring inhalation/exhalation pressure waveforms in portable spirometers and CPAP devices. IC Role / Device Role / Timing Role: Primary gauge pressure transducer converting airway pressure differentials into calibrated analog voltage signals. Use Value: 10 kPa range and ±0.1 %VFSS hysteresis ensure accurate tidal volume calculation and breath-phase detection in clinical-grade measurements. |
Use Scenario: Detecting airflow presence and direction in HVAC damper actuators and fan speed feedback loops. IC Role / Device Role / Timing Role: Differential pressure sensor measuring static pressure drop across filters or across blower inlets/outlets. Use Value: 1.0 ms response time and ratiometric output enable real-time airflow status updates with minimal microcontroller resource overhead. |
| Pressure Switching | Controllers |
Use Scenario: Triggering on/off states in pneumatic solenoid valves based on threshold pressure events (e.g., leak detection). IC Role / Device Role / Timing Role: Analog threshold detector input stage feeding comparator or ADC in embedded pressure switch modules. Use Value: Low offset drift (±1.0 mV) and high repeatability allow reliable hysteresis-based switching without frequent recalibration. |
Use Scenario: Providing closed-loop feedback in microcontroller-based pressure regulators for lab instrumentation and process control. IC Role / Device Role / Timing Role: Precision analog sensor in PID control loop measuring actual pressure against setpoint. Use Value: Temperature-compensated 2.5 mV/kPa sensitivity and 1300–2550 Ω input impedance simplify op-amp buffer design and maintain loop stability across operating temperatures. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar gauge pressure sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPX2010GP | Same 10 kPa range and gauge configuration but in Unibody package (Case 344B-01); higher input impedance (1300–2550 Ω vs. MPXM2010GST1's 1300–2550 Ω - identical spec), same pinout. | Requires through-hole or larger SMT footprint; lacks tape-and-reel packaging; suited for prototyping or low-volume assemblies. | Select MPX2010GP when board space allows larger package and manual assembly is preferred. |
| MPXM2010GS | Identical MPAK package (Case 1320A-02), same pinout and electrical specs; differs only in packaging format (rail vs. tape-and-reel). | No functional difference; MPXM2010GS is supplied in rail format, limiting automated pick-and-place compatibility compared to MPXM2010GST1's tape-and-reel. | Choose MPXM2010GS only for hand-soldered or semi-automated production where reel feed is unavailable. |
Compared with MPX2010GP and MPXM2010GS, MPXM2010GST1 offers optimized manufacturability via tape-and-reel delivery in the compact MPAK package while retaining identical metrological performance and pin-compatible layout - making it the preferred choice for high-volume SMT production of medical and industrial pressure monitors.
Availability
MPXM2010GST1 is available at Aetrix Electronics and suitable for respiratory diagnostics, air movement control, and pressure switching applications requiring stable component supply, consistent calibration traceability, and long-term lifecycle support.
Supply support for MPXM2010GST1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, and IoT markets.
The MPX2010 Series was designed specifically for high-accuracy, temperature-stable gauge pressure measurement in medical and industrial instrumentation, emphasizing factory-calibrated performance and robust media isolation.
FAQ
What pressure type does MPXM2010GST1 measure?
MPXM2010GST1 measures gauge pressure - meaning it senses differential pressure between a port-attached pressure side (P1) and an internal reference (P2), with P1 > P2 required for proper operation. It is not rated for absolute or vacuum measurement, and applying reverse differential pressure may degrade accuracy or cause damage.
What is the operating temperature range for MPXM2010GST1?
MPXM2010GST1 operates from −40 °C to +125 °C, but its temperature compensation is specified over 0 °C to +85 °C. Outside this compensated range, offset and span drift increase beyond ±1.0 %VFSS and ±1.0 mV limits, requiring system-level calibration if used at extremes.
Can MPXM2010GST1 be used with supply voltages below 10 Vdc?
No - MPXM2010GST1 is not characterized or guaranteed for operation below 10 Vdc. The datasheet specifies 10–16 Vdc as the valid supply range; lower voltages reduce output amplitude, increase noise susceptibility, and invalidate ratiometric behavior and temperature compensation accuracy.
How is the pressure port oriented on MPXM2010GST1?
Per Case 1320A-02 mechanical drawing and Table 10, the pressure (P1) side of MPXM2010GST1 is the surface with the port attached - a molded opening aligned with the die cavity. This side must face the measured medium; the opposite side is sealed and non-pressurizable.
Is MPXM2010GST1 compatible with fluids other than air?
MPXM2010GST1 is qualified only for dry clean air. Contact with moisture, oils, solvents, or corrosive gases may compromise the silicone gel isolation or metal traces. For non-air media, consult NXP Application Note AN3728 and request factory validation before deployment.
MPXM2010GST1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- MPX2010
- Package/Case:
- 5-SMD Module, Top Port
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Applications:
- Board Mount
- Pressure Type:
- Vented Gauge
- Operating Pressure:
- 1.45PSI (10kPa)
- Output Type:
- Wheatstone Bridge
- Output:
- 0 mV ~ 25 mV (10V)
- Accuracy:
- ±1%
- Voltage - Supply:
- 10V ~ 16V
- Port Size:
- Male - 0.12" (2.97mm) Tube
- Port Style:
- Barbless
- Features:
- Temperature Compensated
- Termination Style:
- Gull Wing
- Maximum Pressure:
- 10.88PSI (75kPa)
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 5-MPAK
MPXM2010GST1 FAQ
1.How can I place an order for MPXM2010GST1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MPXM2010GST1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPXM2010GST1 reliable?
The price and inventory of MPXM2010GST1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPXM2010GST1 is usually 5 days.
3.What payment methods are accepted for MPXM2010GST1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPXM2010GST1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPXM2010GST1?
MPXM2010GST1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPXM2010GST1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPXM2010GST1?
For technical support, including MPXM2010GST1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPXM2010GST1 requirements.
6.How does Aetrix verify that MPXM2010GST1 is sourced from the original manufacturer or authorized distributors?
All MPXM2010GST1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPXM2010GST1 meets industry standards.
7.What is the process for return or replacement of MPXM2010GST1?
All MPXM2010GST1 units undergo pre-shipment inspection (PSI). If there is an issue with MPXM2010GST1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPXM2010GST1 part is unused and in its original packaging.
Return procedure for MPXM2010GST1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPXM2010GST1 Tags
-
DPS368XTSA1
Infineon Technologies
-
DPS310XTSA1
Infineon Technologies
-
LPS22HHTR
STMicroelectronics
-
ICP-20100
TDK InvenSense
-
ICP-10110
TDK InvenSense
-
LPS22DFTR
STMicroelectronics
-
LPS22HBTR
STMicroelectronics
-
BMP390
Bosch Sensortec
-
BMP581
Bosch Sensortec
-
BMP384
Bosch Sensortec
-
2511020213301
Würth Elektronik
-
ILPS22QSTR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
