My Inquiry
My Account
NXP Semiconductors MPXV2202GC6T1
- Part No.:
- MPXV2202GC6T1
- Manufacturer:
- NXP Semiconductors
- Category:
- Pressure Sensors, Transducers
- Package:
- 8-SMD, Gull Wing, Top Port
- Datasheet:
-
MPXV2202GC6T1.pdf
- Description:
- SENSOR 29.01PSIG 0.13" .04V
- Quantity:
- Payment:
- Shipping:
Inventory:2,343
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPXV2202GC6T1 from NXP Semiconductors (formerly Freescale) is a gauge-pressure silicon piezoresistive sensor with on-chip temperature compensation, delivering a ratiometric 40 mV full-scale output at 10 V supply across 0–200 kPa range. It features ±0.1%VFSS pressure hysteresis, -40°C to +125°C operating temperature, and 1.0 ms response time. Used in medical diagnostics, pump/motor controllers, and level indicators where stable analog pressure feedback is required.
For engineers reviewing the MPXV2202GC6T1 datasheet, MPXV2202GC6T1 pinout, MPXV2202GC6T1 application, or MPXV2202GC6T1 equivalent, this page provides verified technical context, calibrated performance parameters, package-validated pin functions, real-world use scenarios, and two confirmed alternative parts for gauge-pressure sensing in industrial and medical systems.
Technical Context
The MPXV2202GC6T1 integrates a monolithic silicon diaphragm with laser-trimmed piezoresistive strain gauges and thin-film resistor networks for precision calibration. Its output voltage is directly proportional to applied differential pressure (P1 > P2), with offset and span compensated over 0°C to +85°C using on-chip circuitry.
It operates ratiometrically - output scales linearly with supply voltage (10 V typical, 16 V max) - and exhibits end-point linearity of ±0.4%VFSS for gauge configurations. Input and output impedances are 1–2.5 kΩ and 1.4–3 kΩ respectively, supporting direct interface with 12-bit ADCs without external buffering.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Pressure Range | 0–200 kPa gauge - supports industrial pressure monitoring up to 29 psi without overpressure damage. |
| Full Scale Output | 40 mV typical at 10 V supply - enables high-resolution analog-to-digital conversion with minimal gain staging. |
| Supply Voltage | 10 Vdc typical, 16 Vdc max - ratiometric operation ensures output scaling with supply, simplifying power rail design. |
| Response Time | 1.0 ms (10%–90%) - suitable for dynamic pressure monitoring in motor control and robotics feedback loops. |
| Linearity Error | ±0.4%VFSS (end-point method) - guarantees predictable deviation across full scale for calibration-critical applications. |
| Temperature Hysteresis | ±0.5%VFSS (-40°C to +125°C) - maintains repeatability after thermal cycling in embedded environmental sensors. |
| Offset Stability | ±0.5%VFSS after 1000-hour pulsed pressure/temperature test - confirms long-term reliability in continuous-duty medical devices. |
Pinout & Package
MPXV2202GC6T1 uses Case 482A-01: 4-pin, surface-mount, ported gauge-pressure package with stainless steel cap and silicone gel isolation. Port side identified as P1 (positive pressure); opposite side is vented (P2 reference).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Ground reference for both supply and output - must be low-impedance connection to minimize common-mode error. |
| 2 | +VOUT | Positive output terminal - delivers voltage proportional to P1–P2; referenced to Pin 1 (GND). |
| 3 | VS | Positive supply input - powers internal bridge and compensation circuitry; ratiometric output depends on this rail. |
| 4 | –VOUT | Negative output terminal - completes Wheatstone bridge output; used with Pin 2 for differential readout or referenced to GND for single-ended use. |
Key Features
| Feature | Design Value |
|---|---|
| On-chip temperature compensation | Calibrated over 0°C to +85°C - eliminates need for external thermistor networks or digital correction in cost-sensitive designs. |
| Laser-trimmed span and offset | Factory-set accuracy - reduces system-level calibration effort and improves batch consistency in production test. |
| Ratiometric output | Output scales with VS - allows direct connection to microcontroller ADC reference rails for drift-free measurement. |
| Ported gauge configuration | P1 side exposed, P2 vented to ambient - enables absolute pressure measurement relative to local atmosphere without external vacuum reference. |
| Dry air media qualification | Validated for long-term reliability with dry air - informs material compatibility decisions for non-corrosive gas sensing applications. |
Applications
| Medical Diagnostics | Pump/Motor Controllers |
|---|---|
Use Scenario: Non-invasive blood pressure monitoring in portable sphygmomanometers and ventilator pressure feedback loops. IC Role / Device Role / Timing Role: Gauge-pressure transducer converting cuff or airway pressure into calibrated analog voltage for microcontroller ADC sampling. Use Value: ±0.4%VFSS linearity and ±0.5%VFSS temperature hysteresis ensure repeatable clinical-grade readings across patient environments. | Use Scenario: Closed-loop pressure regulation in HVAC blower systems and industrial hydraulic pump controls. IC Role / Device Role / Timing Role: Real-time pressure feedback element in PID control loops, updating every 1 ms to maintain setpoint stability. Use Value: 1.0 ms response time and ratiometric output enable fast, supply-independent correction without signal conditioning overhead. |
| Level Indicators | Robotics Force Sensing |
Use Scenario: Liquid level detection in fuel tanks and chemical storage vessels via hydrostatic pressure measurement. IC Role / Device Role / Timing Role: Submersible gauge sensor mounted at tank base, measuring column height as differential pressure against ambient. Use Value: Ported P1/P2 structure and 0–200 kPa range support accurate level resolution down to ~2 cm water column (0.2 kPa). | Use Scenario: End-effector contact force feedback in collaborative robotic arms during object manipulation. IC Role / Device Role / Timing Role: Embedded pressure interface in gripper housings, translating mechanical load into analog voltage for safety-critical torque limiting. Use Value: -40°C to +125°C operating range and ±0.1%VFSS pressure hysteresis ensure consistent tactile response across thermal and mechanical cycles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar gauge-pressure sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPXV7025GP | Wider 0–25 kPa range, 25 mV/V sensitivity, integrated signal conditioning - requires external 5 V supply and outputs 0.5–4.5 V. | Optimized for low-range medical and consumer devices; lacks MPXV2202GC6T1's 200 kPa capability and direct ratiometric interface. | Select when higher resolution below 25 kPa is needed and system can accommodate conditioned output and tighter range. |
| MPX5700AP | 0–700 kPa absolute range, 5 V supply, 0.2–4.8 V output - includes built-in amplifier and regulator; no ported gauge option. | Suitable for barometric and high-pressure industrial use; not interchangeable due to absolute reference, different pressure range, and active output stage. | Choose for absolute pressure measurement above 200 kPa or when integrated amplification justifies added complexity and cost. |
Compared with MPXV7025GP and MPX5700AP, the MPXV2202GC6T1 offers unique combination of 200 kPa gauge range, true ratiometric 40 mV output, and ported mechanical interface - making it optimal for mid-range industrial pressure feedback where simplicity, supply flexibility, and ambient-referenced measurement are critical.
Availability
MPXV2202GC6T1 is available at Aetrix Electronics and suitable for medical diagnostics, pump/motor controllers, and level indicators requiring stable component supply across extended production lifecycles.
Supply support for MPXV2202GC6T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors acquired Freescale in 2015 and continues its legacy of high-reliability analog sensors for industrial and automotive markets.
The MPXV2202GC6T1 belongs to the MPXV2202 series - designed specifically for cost-effective, temperature-compensated gauge-pressure measurement in space-constrained, medium-pressure applications.
FAQ
What is the pressure type and reference for MPXV2202GC6T1?
The MPXV2202GC6T1 is a gauge-pressure sensor with a ported configuration: P1 (positive pressure) side is exposed to measured pressure, while P2 (vacuum) side is vented to ambient atmosphere. This enables measurement relative to local atmospheric pressure - ideal for liquid level, airflow, and mechanical load sensing where absolute vacuum reference is unnecessary. The device is not rated for absolute or differential-only use without modification.
Can MPXV2202GC6T1 operate with supply voltages other than 10 V?
Yes, the MPXV2202GC6T1 supports supply voltages from 10 Vdc up to 16 Vdc per its maximum ratings. Its output is ratiometric - meaning full-scale voltage scales linearly with supply voltage. At 12 V, full-scale output becomes ~48 mV; at 16 V, ~64 mV. Operation below 10 V is not characterized and may degrade accuracy, linearity, or temperature compensation performance as specified in the datasheet.
What is the meaning of "Case 482A-01" for MPXV2202GC6T1?
Case 482A-01 is the official NXP package designation for the MPXV2202GC6T1: a 4-pin, surface-mount, ported gauge-pressure housing with stainless steel cap, silicone gel isolation, and defined mechanical dimensions (10.54 × 10.54 × 12.70 mm). It specifies pin 1 location, seating plane, port orientation (P1 side), and mold protrusion limits - critical for PCB layout, gasket integration, and mechanical mounting in final assemblies.
How does MPXV2202GC6T1 handle temperature variations?
The MPXV2202GC6T1 incorporates on-chip thin-film resistors and laser-trimmed circuitry that compensate both offset and full-scale span over 0°C to +85°C. Its temperature effect on full-scale span is ±2.0%VFSS and on offset is ±1.0 mV across that range. For operation beyond +85°C (up to +125°C max), only maximum ratings apply - compensation is not guaranteed, and users must validate performance in their specific thermal environment.
Is MPXV2202GC6T1 compatible with corrosive or humid media?
No - the MPXV2202GC6T1 is qualified only for dry air as the pressure medium. Exposure to moisture, condensation, oils, solvents, or corrosive gases may degrade silicone gel encapsulation, wire bonds, or die passivation, leading to long-term drift or failure. For non-dry-air applications, consult NXP's media compatibility documentation or select a sensor with appropriate hermetic sealing or specialized coating - the MPXV2202GC6T1 itself is not rated for such environments.
MPXV2202GC6T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- MPX2202
- Package/Case:
- 8-SMD, Gull Wing, Top Port
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Applications:
- Board Mount
- Pressure Type:
- Vented Gauge
- Operating Pressure:
- 29.01PSI (200kPa)
- Output Type:
- Wheatstone Bridge
- Output:
- 0 mV ~ 40 mV (10V)
- Accuracy:
- -
- Voltage - Supply:
- 10V ~ 16V
- Port Size:
- Male - 0.13" (3.17mm) Tube
- Port Style:
- Barbless
- Features:
- Temperature Compensated
- Termination Style:
- Gull Wing
- Maximum Pressure:
- 58.02PSI (400kPa)
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- -
MPXV2202GC6T1 FAQ
1.How can I place an order for MPXV2202GC6T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MPXV2202GC6T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPXV2202GC6T1 reliable?
The price and inventory of MPXV2202GC6T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPXV2202GC6T1 is usually 5 days.
3.What payment methods are accepted for MPXV2202GC6T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPXV2202GC6T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPXV2202GC6T1?
MPXV2202GC6T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPXV2202GC6T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPXV2202GC6T1?
For technical support, including MPXV2202GC6T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPXV2202GC6T1 requirements.
6.How does Aetrix verify that MPXV2202GC6T1 is sourced from the original manufacturer or authorized distributors?
All MPXV2202GC6T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPXV2202GC6T1 meets industry standards.
7.What is the process for return or replacement of MPXV2202GC6T1?
All MPXV2202GC6T1 units undergo pre-shipment inspection (PSI). If there is an issue with MPXV2202GC6T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPXV2202GC6T1 part is unused and in its original packaging.
Return procedure for MPXV2202GC6T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPXV2202GC6T1 Tags
-
DPS368XTSA1
Infineon Technologies
-
DPS310XTSA1
Infineon Technologies
-
LPS22HHTR
STMicroelectronics
-
ICP-20100
TDK InvenSense
-
ICP-10110
TDK InvenSense
-
LPS22DFTR
STMicroelectronics
-
LPS22HBTR
STMicroelectronics
-
BMP390
Bosch Sensortec
-
BMP581
Bosch Sensortec
-
BMP384
Bosch Sensortec
-
2511020213301
Würth Elektronik
-
ILPS22QSTR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
