My Inquiry
My Account
NXP Semiconductors MPXV5004GC6T1
- Part No.:
- MPXV5004GC6T1
- Manufacturer:
- NXP Semiconductors
- Category:
- Pressure Sensors, Transducers
- Package:
- 8-SMD, Gull Wing, Top Port
- Datasheet:
-
MPXV5004GC6T1.pdf
- Description:
- SENSOR 0.57PSIG 0.13" 4.9V
- Quantity:
- Payment:
- Shipping:
Inventory:2,094
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPXV5004GC6T1 from NXP Semiconductors (formerly Freescale) is a monolithic silicon piezoresistive gauge pressure sensor with integrated temperature compensation and signal conditioning. It delivers a ratiometric analog output (0.75–1.25 V offset, 3.0 V full-scale span at 3 kPa) over a 0–3.92 kPa range, operates from 4.75–5.25 V supply, draws ≤10 mA, and achieves ±1.5% accuracy from +10 °C to +60 °C with factory autozero - used in washing machine water level detection and respiratory equipment.
For engineers reviewing the MPXV5004GC6T1 datasheet, MPXV5004GC6T1 pinout, MPXV5004GC6T1 application, or MPXV5004GC6T1 equivalent, this page provides verified package mapping (Case 98ASB17757C, 8-pin through-hole SOP), confirmed pin functions (VS, GND, VOUT), calibrated transfer function (VOUT = VS × [(0.2 × P) + 0.2]), and two validated alternative parts for gauge pressure sensing in microcontroller-based systems.
Technical Context
The MPXV5004GC6T1 integrates a shear-stress strain gauge, on-chip thin-film temperature compensation circuitry, and a gain/offset calibration stage onto a single die. Its output is ratiometric to supply voltage, enabling direct interface with microcontroller ADCs without external reference.
It uses fluorosilicone gel isolation and stainless steel cap construction for media compatibility with dry air, and features internal decoupling support (1.0 μF + 0.01 μF + 470 pF) to suppress noise in low-pressure measurement applications requiring stable zero-point performance.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Pressure Range | 0–3.92 kPa (0–400 mm H₂O) gauge; enables precise liquid level detection in home appliances. |
| Supply Voltage | 4.75–5.25 VDC; ratiometric operation ensures output scaling matches ADC reference. |
| Full-Scale Span | 3.0 V typical at 3 kPa; defines maximum usable analog output swing before saturation. |
| Offset Voltage | 0.75–1.25 V at zero pressure; sets baseline for A/D conversion headroom. |
| Accuracy | ±1.5% VFSS (0–100 mm H₂O, +10 °C to +60 °C with autozero); supports reliable threshold-based control. |
| Operating Temp | 0 °C to +85 °C ambient; validated for embedded appliance environments. |
| Sensitivity | 1.0 V/kPa; linear transfer function simplifies firmware pressure calculation. |
Pinout & Package
MPXV5004GC6T1 uses Case 98ASB17757C: an 8-pin small outline through-hole package (10.54 × 10.54 × 12.70 mm) with port on the pressure (P1) side and notch/chamfer marking Pin 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | DNC | Internal connection; must remain unconnected to avoid mechanical stress-induced zero drift. |
| 2 | VS | Positive supply input (4.75–5.25 V); powers all internal circuitry including compensation network. |
| 3 | GND | Analog ground reference; requires low-impedance connection to minimize offset error. |
| 4 | VOUT | Ratiometric analog output (0.75–3.92 V); directly interfaces microcontroller ADC inputs. |
| 5–8 | DNC | Internal device connections; no external connection permitted per datasheet specification. |
Key Features
| Feature | Design Value |
|---|---|
| On-chip temperature compensation | Calibrated over +10 °C to +60 °C; eliminates need for external thermistor or software correction. |
| Factory autozero calibration | Stores zero-pressure output at installation; reduces system-level offset drift by ±1.5% VFSS. |
| Ratiometric output | VOUT scales linearly with VS; removes dependency on stable voltage reference for ADC accuracy. |
| Durable PPS thermoplastic package | Resists moisture and mechanical stress; qualified for long-term use in humid appliance enclosures. |
| Fluorosilicone gel isolation | Protects die and wire bonds while transmitting pressure; maintains reliability with dry air media. |
Applications
| Washing Machine Water Level Control | Respiratory Equipment Pressure Monitoring |
|---|---|
Use Scenario: Detecting water column height during fill cycle via differential pressure across sealed chamber. IC Role / Device Role / Timing Role: Gauge pressure transducer converting hydrostatic pressure into calibrated analog voltage for MCU ADC sampling. Use Value: Enables accurate 0–400 mm H₂O measurement with ±1.5% error, supporting programmable fill volume without mechanical float switches. | Use Scenario: Real-time monitoring of airway pressure in CPAP or ventilator circuits during patient inhalation/exhalation. IC Role / Device Role / Timing Role: Low-range gauge sensor providing continuous analog feedback to closed-loop pressure control algorithm. Use Value: Delivers stable 0–3.92 kPa output with <10 mA supply current, minimizing thermal self-heating impact on breath-triggered response. |
| Appliance Liquid Level Sensing | Microcontroller-Based Pressure Data Logging |
Use Scenario: Measuring detergent tank or softener reservoir level using air pressure trapped above liquid surface. IC Role / Device Role / Timing Role: Standalone analog pressure interface with built-in compensation, eliminating external signal conditioning. Use Value: Reduces BOM count by integrating gain, offset, and temp-compensation; supports direct connection to 10-bit+ MCU ADCs. | Use Scenario: Capturing low-frequency pressure trends (e.g., HVAC duct static pressure) over hours/days in battery-powered IoT nodes. IC Role / Device Role / Timing Role: Low-power analog front-end delivering ratiometric output compatible with sleep-mode ADC wake-up sampling. Use Value: Enables >1-year battery life via 10 mA max draw and simple 5 V rail compatibility, avoiding complex LDO or reference ICs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar gauge pressure sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPXV5004GC6U | Same die, identical electrical specs, but shipped in rail packaging instead of reel; pinout and footprint fully matched. | No functional difference; selected when board assembly uses manual or semi-automated placement rather than tape-and-reel feeders. | Choose MPXV5004GC6U for low-volume prototyping or small-batch production where reel handling is impractical. |
| MPVZ5004GC6U | Media-resistant variant with fluorosilicone gel and stainless steel cap; same pressure range, accuracy, and pinout but enhanced environmental sealing. | Better suited for humid or condensing environments where long-term gel integrity is critical, e.g., medical devices exposed to sterilization cycles. | Choose MPVZ5004GC6U when operating in high-humidity or chemically aggressive media beyond dry air. |
Compared with MPXV5004GC6T1, MPXV5004GC6U offers identical performance in rail format for flexible assembly, while MPVZ5004GC6U adds robust media resistance without sacrificing accuracy or pin compatibility - both serve as validated alternatives for gauge pressure measurement where environmental durability or packaging logistics differ.
Availability
MPXV5004GC6T1 is available at Aetrix Electronics and suitable for washing machine water level control, respiratory equipment pressure monitoring, and appliance liquid level sensing requiring stable component supply across industrial production lifecycles.
Supply support for MPXV5004GC6T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company formed from the spin-off of Philips' semiconductor division, now headquartered in Eindhoven, Netherlands, with leadership in secure connectivity and analog/mixed-signal solutions.
The MPXV5004GC6T1 belongs to NXP's legacy Freescale MPxx5004 series - designed specifically for cost-sensitive, microcontroller-integrated pressure sensing in consumer and medical appliances where accuracy, stability, and ease of integration are prioritized over ultra-high resolution.
FAQ
What is the operating temperature range for the MPXV5004GC6T1?
The MPXV5004GC6T1 has an operating temperature range of 0 °C to +85 °C ambient. Its accuracy specifications (±1.5% VFSS) are guaranteed over +10 °C to +60 °C with factory autozero enabled. The device uses on-chip temperature compensation circuitry to maintain performance across this range, making it suitable for enclosed appliance environments where internal temperatures may rise during operation. MPXV5004GC6T1 does not require external thermal management under normal conditions.
Does the MPXV5004GC6T1 require external calibration after installation?
No, the MPXV5004GC6T1 includes factory autozero calibration that stores the zero-pressure output reading during manufacturing. This stored value is subtracted from subsequent measurements during normal operation, reducing system-level offset drift. While external recalibration is not required, optimal performance assumes minimal mechanical stress and mounting position consistency - any significant change in orientation or mounting force may affect zero-point accuracy. MPXV5004GC6T1 is designed for plug-and-measure deployment in fixed-installation applications.
What media is compatible with the MPXV5004GC6T1 pressure port?
The MPXV5004GC6T1 is qualified for use with dry air as the pressure medium. Its fluorosilicone gel isolation and thermoplastic (PPS) package provide protection against humidity, but contact with liquids, oils, solvents, or corrosive gases may degrade long-term reliability. Freescale's internal qualification testing was performed exclusively with dry air; media compatibility for other substances must be verified separately with NXP. MPXV5004GC6T1 should not be exposed to condensate or submersion unless validated for the specific application.
Can the MPXV5004GC6T1 be used in differential pressure configurations?
No, the MPXV5004GC6T1 is a gauge pressure sensor with a single pressure port (P1) referenced to ambient atmospheric pressure (P2). It is not configured for true differential measurement between two isolated ports. For differential applications, NXP offers the MPXV5004DP variant (dual-port, differential configuration) or MPVZ5004 series variants with dedicated P1/P2 ports. MPXV5004GC6T1 must be mounted with its pressure port exposed to the measured system and its case vented to ambient air.
What is the recommended power supply decoupling for the MPXV5004GC6T1?
The recommended decoupling network for MPXV5004GC6T1 consists of a 1.0 μF bulk capacitor, a 0.01 μF ceramic capacitor, and a 470 pF capacitor placed close to the VS and GND pins. This three-capacitor arrangement suppresses low-, mid-, and high-frequency noise on the supply rail, ensuring stable operation of the internal amplifier and compensation circuitry. Layout best practices include short traces, ground plane beneath the sensor, and avoidance of routing noisy digital signals near VS or VOUT. MPXV5004GC6T1 performance degrades if decoupling is omitted or improperly implemented.
MPXV5004GC6T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- MPXV5004
- Package/Case:
- 8-SMD, Gull Wing, Top Port
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Applications:
- Board Mount
- Pressure Type:
- Vented Gauge
- Operating Pressure:
- 0.57PSI (3.92kPa)
- Output Type:
- Analog Voltage
- Output:
- 1 V ~ 4.9 V
- Accuracy:
- -
- Voltage - Supply:
- 4.75V ~ 5.25V
- Port Size:
- Male - 0.13" (3.17mm) Tube
- Port Style:
- Barbless
- Features:
- Temperature Compensated
- Termination Style:
- Gull Wing
- Maximum Pressure:
- 2.32PSI (16kPa)
- Operating Temperature:
- 0°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- -
MPXV5004GC6T1 FAQ
1.How can I place an order for MPXV5004GC6T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MPXV5004GC6T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPXV5004GC6T1 reliable?
The price and inventory of MPXV5004GC6T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPXV5004GC6T1 is usually 5 days.
3.What payment methods are accepted for MPXV5004GC6T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPXV5004GC6T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPXV5004GC6T1?
MPXV5004GC6T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPXV5004GC6T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPXV5004GC6T1?
For technical support, including MPXV5004GC6T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPXV5004GC6T1 requirements.
6.How does Aetrix verify that MPXV5004GC6T1 is sourced from the original manufacturer or authorized distributors?
All MPXV5004GC6T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPXV5004GC6T1 meets industry standards.
7.What is the process for return or replacement of MPXV5004GC6T1?
All MPXV5004GC6T1 units undergo pre-shipment inspection (PSI). If there is an issue with MPXV5004GC6T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPXV5004GC6T1 part is unused and in its original packaging.
Return procedure for MPXV5004GC6T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPXV5004GC6T1 Tags
-
DPS368XTSA1
Infineon Technologies
-
DPS310XTSA1
Infineon Technologies
-
LPS22HHTR
STMicroelectronics
-
ICP-20100
TDK InvenSense
-
ICP-10110
TDK InvenSense
-
LPS22DFTR
STMicroelectronics
-
LPS22HBTR
STMicroelectronics
-
BMP390
Bosch Sensortec
-
BMP581
Bosch Sensortec
-
BMP384
Bosch Sensortec
-
2511020213301
Würth Elektronik
-
ILPS22QSTR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
