My Inquiry
My Account
NXP Semiconductors MPXV5010GC7U
- Part No.:
- MPXV5010GC7U
- Manufacturer:
- NXP Semiconductors
- Category:
- Pressure Sensors, Transducers
- Package:
- 8-DIP (0.550", 13.97mm), Top Port
- Datasheet:
-
MPXV5010GC7U.pdf
- Description:
- SENSOR 1.45PSIG 0.13" 4.7V 8DIP
- Quantity:
- Payment:
- Shipping:
Inventory:120
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPXV5010GC7U from NXP Semiconductors is a gauge pressure sensor IC with on-chip signal conditioning, temperature compensation, and factory calibration. It delivers a ratiometric analog output (0.2–4.925 V) over 0–10 kPa full-scale range at 5 V supply, ±5.0% accuracy (0–85°C), and operates from –40°C to +125°C. It is used in HVAC airflow monitoring and respiratory system pressure feedback.
For engineers reviewing the MPXV5010GC7U datasheet, MPXV5010GC7U pinout, MPXV5010GC7U application, or MPXV5010GC7U equivalent, this page provides verified package mapping (SOT1863-1), confirmed pin functions (VS, GND, VOUT), real-world error band data (±0.5 kPa), and validated alternative part comparisons for medical and industrial pressure sensing designs.
Technical Context
The MPXV5010GC7U integrates a patented silicon shear-stress strain gauge with thin-film temperature compensation circuitry and dual-stage gain amplification on a monolithic die. Its output follows VOUT = VS × (0.09 × P + 0.04) ± 5.0% VFSS, where P is pressure in kPa and VS is supply voltage.
It uses fluorosilicone gel isolation to protect the die while transmitting pressure to the diaphragm, and requires the decoupling network shown in Figure 11 (1.0 µF + 0.01 µF + 470 pF) for stable A/D interfacing. The device is specified for dry air media only; alternate media require factory consultation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Pressure Range | 0–10 kPa full-scale differential/gauge range; saturates outside this band. |
| Output Voltage | 0.2–4.925 V at 5 V supply; ratiometric to VS (4.75–5.25 V). |
| Accuracy | ±5.0% of full-scale span (VFSS) over 0–85°C, including linearity, hysteresis, and TCOFFSET. |
| Operating Temp | –40°C to +125°C storage and operation; compensated over –40°C to +125°C. |
| Response Time | 1.0 ms (10% to 90% output transition under step pressure change). |
| Supply Current | 5.0 mA typical at 5 V; enables low-power embedded system integration. |
| Warm-up Time | ≤20 ms to meet output voltage spec after pressure stabilization. |
Pinout & Package
MPXV5010GC7U uses the SOT1863-1 small-outline plastic package (10.67 mm × 10.67 mm × 12.96 mm), with thermoplastic (PPS) body and epoxy unibody construction for industrial-grade mechanical robustness.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | No Connect | Internally unconnected; must be left floating or tied to GND per layout guidelines. |
| 2 | VS | 5 V ±0.25 V supply input; requires decoupling per Figure 11. |
| 3 | GND | Analog ground reference; separate from digital ground in mixed-signal systems. |
| 4 | VOUT | Analog output (0.2–4.925 V); directly interfaces to 10-bit+ ADC inputs. |
| 5–8 | No Connect | All four pins are internally unconnected; no routing or termination required. |
Key Features
| Feature | Design Value |
|---|---|
| On-chip signal conditioning | Eliminates external op-amps and calibration resistors; reduces BOM count by ≥3 components. |
| Patented silicon shear-stress gauge | Enables high stability under thermal cycling and mechanical stress; supports 1000-hour pulsed pressure reliability test. |
| Fluorosilicone gel isolation | Protects wire bonds and die surface from moisture and particulates while transmitting pressure accurately. |
| Gauge configuration | Measures pressure relative to ambient; simplifies porting in non-sealed systems like HVAC ducts or respiratory masks. |
| Dual-stage gain architecture | Provides precise offset (0.2 V min) and span (4.5 V typ) control across temperature without trimming. |
Applications
| Hospital Bed Pressure Monitoring | HVAC Airflow Sensing |
|---|---|
Use Scenario: Detect patient presence and position shifts via mattress air chamber pressure changes. IC Role / Device Role / Timing Role: Gauge pressure transducer providing analog feedback to microcontroller ADC every 100 ms. Use Value: Enables low-power, drift-compensated detection with ±0.5 kPa error margin-sufficient for distinguishing 10 kg weight increments. | Use Scenario: Monitor static pressure drop across HVAC filters and ducts to trigger maintenance alerts. IC Role / Device Role / Timing Role: Analog front-end sensor feeding continuous pressure data to HVAC controller's A/D subsystem. Use Value: Delivers stable 0–10 kPa measurement over –40°C to +125°C ambient, eliminating need for external temperature compensation. |
| Respiratory System Flow Control | Washing Machine Water Level Detection |
Use Scenario: Regulate inspiratory/expiratory pressure in portable ventilators using closed-loop feedback. IC Role / Device Role / Timing Role: Primary pressure feedback element in safety-critical breathing circuit with <20 ms warm-up time. Use Value: Meets medical timing requirements with 1 ms response and ±5.0% VFSS accuracy-validated per AN1950 reference design. | Use Scenario: Determine water fill level in drum by measuring air pressure in sealed tube connected to tub base. IC Role / Device Role / Timing Role: Low-cost, calibrated gauge sensor interfaced to MCU GPIO/ADC with minimal external components. Use Value: Replaces mechanical float switches with solid-state reliability and 0.5 kPa resolution-enabling precise 1 cm water column detection. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar gauge pressure sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPXV5010GC6T1 | Same S08 package but SOT1854-1 case; identical electrical specs and pinout; differs only in mechanical footprint (10.67 × 10.67 × 12.96 mm vs. 10.67 × 10.67 × 12.96 mm - same dimensions, different mold variant). | Compatible in same PCB land pattern per Figure 15; validated for identical medical and appliance use cases. | Select GC6T1 if legacy board design uses SOT1854-1 footprint; GC7U is preferred for new designs requiring Case 482C-03 marking and traceability. |
| MPXV5010GP | Same MPXV5010 family, but SOT1693-3 package (12.06 × 12.06 × 7.62 mm); identical electrical performance, 8-pin S08 format, and pin compatibility (VS/GND/VOUT on pins 2/3/4). | Larger footprint and lower profile; suited for space-constrained but height-sensitive layouts (e.g., thin appliance control boards). | Choose GP when board stack height is limited to <8 mm; GC7U offers better vibration resistance due to taller case geometry and gel encapsulation. |
Compared with MPXV5010GC6T1 and MPXV5010GP, the MPXV5010GC7U provides identical gauge pressure performance and pinout but features Case 482C-03 mechanical identification, optimized SOT1863-1 thermal mass for stable long-term drift, and explicit qualification for port-attached P1-side mounting per Table 7.
Availability
MPXV5010GC7U is available at Aetrix Electronics and suitable for hospital bed monitoring, HVAC airflow control, and respiratory system pressure feedback requiring stable component supply across multi-year production cycles.
Supply support for MPXV5010GC7U includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, and IoT applications.
The MPXV5010 series belongs to NXP's integrated pressure sensor product line, designed specifically for microcontroller-based systems requiring calibrated, temperature-compensated analog pressure outputs in compact surface-mount packages.
FAQ
What is the maximum rated pressure for MPXV5010GC7U?
The MPXV5010GC7U has a maximum pressure rating of 40 kPa (Table 5). However, its specified full-scale operating range is 0–10 kPa; operation beyond 10 kPa causes output saturation and violates the ±5.0% accuracy specification. Exceeding 40 kPa may cause permanent damage.
Does MPXV5010GC7U require external calibration during system integration?
No, MPXV5010GC7U does not require external calibration. It is factory-calibrated and temperature-compensated across –40°C to +125°C, delivering a ratiometric output that meets ±5.0% VFSS accuracy over 0–85°C without user adjustment. Only proper power decoupling (Figure 11) is needed for specification compliance.
Which side is the pressure port (P1) on MPXV5010GC7U?
Per Table 7, the pressure (P1) side of MPXV5010GC7U is the side with the port attached - not the side with part marking. This orientation ensures fluorosilicone gel protection of the die; applying pressure to the opposite (P2) side invalidates specifications and risks reliability failure.
Can MPXV5010GC7U be used with media other than dry air?
No - MPXV5010GC7U is qualified only for dry air as the pressure medium. Other gases or liquids may degrade the fluorosilicone gel or corrode internal structures. NXP explicitly states that media compatibility testing is required before use with alternate media, and factory consultation is mandatory per Section 9.
What is the recommended decoupling network for MPXV5010GC7U?
The recommended decoupling network for MPXV5010GC7U is shown in Figure 11: a 1.0 µF bulk capacitor, a 0.01 µF ceramic capacitor, and a 470 pF capacitor between VS and GND. This network is mandatory to meet all electrical specifications, including accuracy and response time, and must be placed within 5 mm of the VS and GND pins.
MPXV5010GC7U Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- MPXV5010
- Package/Case:
- 8-DIP (0.550", 13.97mm), Top Port
- Packaging:
- Tube
- Product Status:
- Active
- Applications:
- Board Mount
- Pressure Type:
- Vented Gauge
- Operating Pressure:
- 1.45PSI (10kPa)
- Output Type:
- Analog Voltage
- Output:
- 0.2 V ~ 4.7 V
- Accuracy:
- ±5%
- Voltage - Supply:
- 4.75V ~ 5.25V
- Port Size:
- Male - 0.13" (3.17mm) Tube
- Port Style:
- Barbless
- Features:
- Temperature Compensated
- Termination Style:
- PC Pin
- Maximum Pressure:
- 5.8PSI (40kPa)
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 8-DIP
MPXV5010GC7U FAQ
1.How can I place an order for MPXV5010GC7U through Aetrix?
Please submit a Request for Quotation (RFQ) for MPXV5010GC7U on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPXV5010GC7U reliable?
The price and inventory of MPXV5010GC7U are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPXV5010GC7U is usually 5 days.
3.What payment methods are accepted for MPXV5010GC7U?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPXV5010GC7U transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPXV5010GC7U?
MPXV5010GC7U orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPXV5010GC7U order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPXV5010GC7U?
For technical support, including MPXV5010GC7U datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPXV5010GC7U requirements.
6.How does Aetrix verify that MPXV5010GC7U is sourced from the original manufacturer or authorized distributors?
All MPXV5010GC7U products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPXV5010GC7U meets industry standards.
7.What is the process for return or replacement of MPXV5010GC7U?
All MPXV5010GC7U units undergo pre-shipment inspection (PSI). If there is an issue with MPXV5010GC7U, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPXV5010GC7U part is unused and in its original packaging.
Return procedure for MPXV5010GC7U:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPXV5010GC7U Tags
-
DPS368XTSA1
Infineon Technologies
-
DPS310XTSA1
Infineon Technologies
-
LPS22HHTR
STMicroelectronics
-
ICP-20100
TDK InvenSense
-
ICP-10110
TDK InvenSense
-
LPS22DFTR
STMicroelectronics
-
LPS22HBTR
STMicroelectronics
-
BMP390
Bosch Sensortec
-
BMP581
Bosch Sensortec
-
BMP384
Bosch Sensortec
-
2511020213301
Würth Elektronik
-
ILPS22QSTR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
