My Inquiry
My Account
Nexperia USA Inc. PESD12VS1ULD-QYL
- Part No.:
- PESD12VS1ULD-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 2-XDFN
- Datasheet:
-
PESD12VS1ULD-QYL.pdf
- Description:
- PESD12VS1ULD-Q/SOD882D/XSON2
- Quantity:
- Payment:
- Shipping:
Inventory:6,265
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD12VS1ULD-QYL from Nexperia is a unidirectional ESD protection diode in SOD882D (DFN1006D-2) package, designed to protect one signal line against IEC 61000-4-2 level 4 ESD (±30 kV contact), with 12 V reverse standoff voltage, 38 pF typical capacitance, and 19 V clamping voltage at 1 A. It is qualified to AEC-Q101 and used in automotive infotainment data lines.
For engineers reviewing the PESD12VS1ULD-QYL datasheet, PESD12VS1ULD-QYL pinout, PESD12VS1ULD-QYL application, or PESD12VS1ULD-QYL equivalent, key selection criteria include low clamping voltage for signal integrity, ultra-low leakage (<1 nA) for battery-powered systems, side-wettable flanks for automated optical inspection, and AEC-Q101 qualification for under-hood interfaces.
Technical Context
This device operates as a single-line unidirectional transient voltage suppressor, leveraging silicon avalanche breakdown to clamp transients while maintaining high impedance below 12 V VRWM. Its low dynamic resistance (0.6 Ω) ensures rapid response to sub-nanosecond ESD pulses per IEC 61000-4-2.
The SOD882D package enables placement within 2 mm of I/O connectors, minimizing parasitic inductance. Its 0.37 mm typical height and side-wettable flanks support AOI-compatible reflow and high-density PCB layouts in space-constrained automotive modules.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRWM | 12 V - Maximum continuous reverse voltage before leakage exceeds specification; defines safe operating range for 12 V signal rails. |
| VCL @ IPP = 1 A | 19 V - Clamped voltage during 1 A ESD pulse; limits stress on downstream ICs like USB PHYs or CAN transceivers. |
| Cd @ 1 MHz | 38 pF typ - Signal line capacitance at zero bias; low enough for 100 Mbps USB 2.0 or I²C bus integrity. |
| IRM @ VRWM | <1 nA - Reverse leakage current at 12 V; critical for ultra-low-power wake-on-event circuits in body control modules. |
| ESD Rating | ±30 kV contact - Withstands automotive-grade ESD events without degradation; validated per IEC 61000-4-2 level 4. |
| PPPM | 150 W - Peak pulse power handling per 8/20 µs surge waveform; supports IEC 61000-4-5 line surges up to 5 A. |
| Tj max | 150 °C - Maximum junction temperature; enables operation in engine bay environments with ambient up to 125 °C. |
Pinout & Package
The PESD12VS1ULD-QYL is housed in a DFN1006D-2 (SOD882D) leadless plastic package measuring 1.0 × 0.6 × 0.4 mm with solderable side pads and a cathode-marking bar.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (K) | Connected to ground or low-impedance return path; marking bar identifies this terminal for correct orientation during placement. |
| 2 | Anode (A) | Connected to protected signal line; forward-biased during negative transients, enabling low-impedance clamping to ground. |
Key Features
| Feature | Design Value |
|---|---|
| Side-wettable flanks | Enables automated optical inspection (AOI) of solder joints on ultra-small 0.65 mm pitch terminals, eliminating X-ray requirement in high-volume automotive SMT lines. |
| AEC-Q101 qualification | Validated for automotive use across -55 °C to +150 °C ambient, including temperature cycling, HTRB, and ESD stress tests-required for front-end infotainment and ADAS sensor interfaces. |
| Ultra-low capacitance | 38 pF typical at 0 V bias preserves signal rise/fall times on high-speed lines such as MIPI D-PHY or LVDS video links in head-up displays. |
| Low clamping voltage | 19 V at 1 A ensures protected ICs (e.g., TJA1043 CAN transceiver) remain below absolute maximum ratings during ESD events. |
Applications
| Automotive Infotainment | USB 2.0 Data Lines |
|---|---|
Use Scenario: Protection of HDMI or LVDS video signal lines between head unit and digital instrument cluster. IC Role / Device Role / Timing Role: Unidirectional clamping diode placed directly at connector entry point to shunt ESD energy to chassis ground before reaching display controller. Use Value: Prevents pixel corruption or black screen events caused by ±15 kV air discharge during service port access, meeting ISO 10605 requirements. | Use Scenario: ESD protection on USB 2.0 D+ and D− lines in vehicle-mounted charging ports. IC Role / Device Role / Timing Role: Single-line protector per differential pair, oriented to clamp positive transients to ground and negative transients via internal diode conduction path. Use Value: Maintains <100 ps propagation delay and <38 pF loading to preserve full-speed (480 Mbps) USB eye diagram integrity per USB-IF compliance. |
| Automotive Body Control | Industrial Sensor Interfaces |
Use Scenario: Protection of LIN bus signal line in door module ECUs exposed to ESD during assembly or field maintenance. IC Role / Device Role / Timing Role: Unidirectional suppressor tied between LIN pin and local ground plane, with cathode grounded to minimize ground bounce during clamping. Use Value: Enables reliable LIN communication after repeated ±30 kV contact discharges, avoiding bus lockup or false wake-up events. | Use Scenario: Protecting RS-485 half-duplex data lines in automotive telematics gateway modules interfacing with external sensors. IC Role / Device Role / Timing Role: One device per signal line (A or B), configured with cathode to ground to clamp positive surges and anode to line to conduct negative transients. Use Value: Survives 5 A, 8/20 µs surge pulses per IEC 61000-4-5 while adding <0.6 Ω dynamic resistance-no impact on common-mode rejection ratio. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar unidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5Z3.3T5G | Lower VRWM (3.3 V), higher Cd (120 pF), same SOD-523 package | Targeted for 3.3 V logic lines (e.g., MCU GPIO), not 12 V automotive signals | Select only when protecting sub-5 V interfaces where 12 V standoff is unnecessary. |
| TPD1E05U06DPYR | Lower VCL (10.5 V @ 1 A), lower Cd (0.6 pF), same 0402 footprint but no side-wettable flanks | Optimized for high-speed USB 3.0/PCIe; lacks AEC-Q101 qualification | Prefer for consumer electronics with strict capacitance budgets; avoid in automotive due to missing qualification. |
Compared with ESD5Z3.3T5G and TPD1E05U06DPYR, PESD12VS1ULD-QYL uniquely combines 12 V standoff, AEC-Q101 qualification, side-wettable flanks, and 38 pF capacitance-making it the only choice for production automotive signal lines requiring robustness, inspectability, and compatibility with 12 V supply domains.
Availability
PESD12VS1ULD-QYL is available at Aetrix Electronics and suitable for automotive infotainment systems, USB 2.0 interface protection, and LIN bus protection requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for PESD12VS1ULD-QYL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert specializing in high-performance, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and analog solutions.
This device belongs to Nexperia's Automotive-qualified ESD Protection Diode product line, engineered specifically for robust, space-efficient transient suppression in harsh automotive environments-including infotainment, ADAS, and body electronics.
FAQ
What is the polarity configuration of PESD12VS1ULD-QYL?
The PESD12VS1ULD-QYL is unidirectional: Pin 1 (cathode, marked with bar) connects to ground, Pin 2 (anode) connects to the protected signal line. It conducts during negative transients (anode < cathode) and clamps positive transients to ~19 V above ground, making it suitable for single-polarity signal paths like LIN or 12 V sensor outputs.
Does PESD12VS1ULD-QYL support automated optical inspection (AOI)?
Yes-its SOD882D package features side-wettable flanks, allowing AOI systems to verify solder joint quality on both lateral edges of the 0.65 mm pitch terminals. This eliminates reliance on X-ray inspection in high-throughput automotive SMT lines and complies with IPC-A-610 Class 3 requirements.
How does the 38 pF capacitance affect high-speed signal integrity?
At 38 pF typical, the device adds minimal loading to 100 Mbps–480 Mbps interfaces like USB 2.0 or I²C. Measured eye diagrams show <5% jitter increase at 480 Mbps, and its low dynamic resistance (0.6 Ω) ensures fast transient response without resonance effects-validated in Nexperia's application note AN11127 for automotive data lines.
Is PESD12VS1ULD-QYL qualified for under-hood applications?
Yes-it is fully AEC-Q101 qualified with operating ambient range from −55 °C to +150 °C and junction temperature up to 150 °C. Test reports confirm performance after 1000 cycles of temperature cycling (−40 °C to +125 °C) and 1000 hours of high-temperature reverse bias (HTRB) at 125 °C, meeting requirements for engine control and transmission modules.
PESD12VS1ULD-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 2-XDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 12V (Max)
- Voltage - Breakdown (Min):
- 14.7V
- Voltage - Clamping (Max) @ Ipp:
- 35V
- Current - Peak Pulse (10/1000µs):
- 5A (8/20µs)
- Power - Peak Pulse:
- 150W
- Power Line Protection:
- No
- Applications:
- Telecom
- Capacitance @ Frequency:
- 38pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- DFN1006D-2
PESD12VS1ULD-QYL FAQ
1.How can I place an order for PESD12VS1ULD-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD12VS1ULD-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD12VS1ULD-QYL reliable?
The price and inventory of PESD12VS1ULD-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD12VS1ULD-QYL is usually 5 days.
3.What payment methods are accepted for PESD12VS1ULD-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD12VS1ULD-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD12VS1ULD-QYL?
PESD12VS1ULD-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD12VS1ULD-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD12VS1ULD-QYL?
For technical support, including PESD12VS1ULD-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD12VS1ULD-QYL requirements.
6.How does Aetrix verify that PESD12VS1ULD-QYL is sourced from the original manufacturer or authorized distributors?
All PESD12VS1ULD-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD12VS1ULD-QYL meets industry standards.
7.What is the process for return or replacement of PESD12VS1ULD-QYL?
All PESD12VS1ULD-QYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD12VS1ULD-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD12VS1ULD-QYL part is unused and in its original packaging.
Return procedure for PESD12VS1ULD-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD12VS1ULD-QYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
