My Inquiry
My Account
Nexperia USA Inc. PESD5V0L1BA-QX
- Part No.:
- PESD5V0L1BA-QX
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SC-76, SOD-323
- Datasheet:
-
PESD5V0L1BA-QX.pdf
- Description:
- PESD5V0L1BA-Q/SOD323/SOD2
- Quantity:
- Payment:
- Shipping:
Inventory:8,778
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0L1BA-Q from Nexperia is a bidirectional ESD protection diode in SOD323 (SC-76) package, designed to safeguard single signal lines against IEC 61000-4-2 level 4 ESD (±30 kV contact), IEC 61000-4-5 surge (15 A, 8/20 µs), with 5 V reverse standoff voltage, 75 pF capacitance, and 33 V clamping voltage at 15 A. It is qualified to AEC-Q101 for automotive CAN bus and data line protection.
For engineers reviewing the PESD5V0L1BA-Q datasheet, PESD5V0L1BA-Q pinout, PESD5V0L1BA-Q application, or PESD5V0L1BA-Q equivalent, this device is selected for low-capacitance, high-reliability transient suppression on bidirectional interfaces where leakage (<0.01 µA), clamping performance, and automotive qualification are critical design constraints.
Technical Context
This dual-cathode, bidirectional TVS diode implements a symmetrical clamp structure across two anti-parallel diodes sharing a common cathode configuration (K1/K2), enabling protection of AC-coupled or bipolar signal lines without polarity sensitivity. Its layout supports direct placement at I/O connectors with minimal trace inductance.
The device operates within a junction temperature range of –65 °C to 150 °C and maintains stable clamping (VCL ≤ 33 V at IPPM = 15 A) and ultra-low leakage (IRM = 0.01 µA at VRWM = 5 V), meeting stringent requirements for high-speed data lines including CAN FD and USB 2.0.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous operating voltage before conduction; defines safe signal swing margin for 3.3 V/5 V buses. |
| Clamping Voltage | 33 V at 15 A (8/20 µs) - Peak voltage seen by protected IC during worst-case surge; ensures downstream ICs remain below absolute max ratings. |
| Diode Capacitance | 75 pF at 1 MHz, 0 V - Low enough to avoid signal integrity degradation on CAN, I²C, and UART lines up to 1 Mbps. |
| ESD Withstand | ±30 kV contact (IEC 61000-4-2 Level 4) - Full immunity to human-body ESD events at connector-level exposure points. |
| Peak Pulse Power | 500 W (8/20 µs) - Sustains high-energy transients without thermal runaway, validated per IEC 61000-4-5. |
| Leakage Current | 0.01 µA at 5 V - Negligible DC loading on high-impedance sensor or reference lines; avoids measurement drift. |
| Breakdown Voltage | 7.6 V typical (5 mA) - Ensures clean turn-on above normal signal excursions while avoiding false triggering. |
Pinout & Package
SOD323 (SC-76) surface-mount plastic package: 2-pin, 1.7 mm × 1.25 mm × 0.95 mm body, 1.3 mm lead pitch, cathode-marked end.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode of Diode 1 | Forms one half of symmetrical bidirectional clamp; connects to protected line when used in standard dual-cathode configuration. |
| 2 (K2) | Cathode of Diode 2 | Completes anti-parallel pair; both cathodes tied to ground in standard layout, enabling clamping for ± transients on a single line. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional ESD Protection | Single-device solution for AC-coupled or reversible signal paths (e.g., CAN H/L, RS-485, audio differential pairs). |
| AEC-Q101 Qualified | Validated for automotive under temperature cycling, HTRB, and ESD stress-enables use in infotainment, ADAS sensor interfaces. |
| Ultra-Low Capacitance | 75 pF enables <1% signal distortion on 10 MHz digital signals; suitable for USB 2.0 D+/D– and MIPI D-PHY lanes. |
| Low Clamping Ratio | VCL/VBR ≈ 4.3 - Efficient energy diversion with minimal overvoltage overshoot during fast transients. |
| Sub-µA Leakage | 0.01 µA at rated VRWM - Preserves battery life in always-on automotive modules and avoids bias shift in precision analog front-ends. |
Applications
| CAN Bus Protection | Automotive Sensor Interface |
|---|---|
|
Use Scenario: Protecting CAN H and CAN L lines in vehicle ECUs against ESD from cable harness handling and load dump coupling. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed directly at OBD-II connector or module header, clamping ±30 kV ESD pulses to <33 V. Use Value: Prevents CAN controller latch-up or PHY damage while maintaining <75 pF loading to preserve bit timing integrity at 500 kbps–1 Mbps. |
Use Scenario: Shielding LIN or SENT sensor outputs (e.g., pressure, temperature) from board-level ESD during assembly and field service. IC Role / Device Role / Timing Role: Low-leakage (0.01 µA) standoff protector on unidirectional analog/digital sensor lines, grounded via K1/K2 tie point. Use Value: Eliminates false triggers and offset errors caused by leakage-induced voltage drop across high-impedance sensor pull-ups. |
| USB 2.0 Data Line Protection | Industrial HMI Touch Interface |
|
Use Scenario: Safeguarding D+ and D– lines in automotive infotainment USB ports against hot-plug ESD and cable discharge events. IC Role / Device Role / Timing Role: Dual-cathode ESD array (one device per line) with 75 pF capacitance, placed within 3 mm of USB connector pins. Use Value: Maintains eye diagram compliance at 480 Mbps by limiting capacitive loading and ensuring sub-35 V clamping during ±15 kV air discharge. |
Use Scenario: Protecting projected capacitive (PCAP) touch controller I²C lines and reset inputs in factory HMIs exposed to operator ESD. IC Role / Device Role / Timing Role: Standoff-rated (5 V) clamp on 3.3 V I²C SDA/SCL, leveraging bidirectional symmetry to handle both logic-high and logic-low transients. Use Value: Avoids I²C bus lockup during ESD events while adding <1 ns propagation delay-no firmware intervention required. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor SZ1.5SMC5.0AT3G | Unidirectional, higher VRWM (5.0 V), higher VCL (11.2 V @ 100 A), larger SMC package (7.1 mm × 6.2 mm) | Requires external series resistor for bidirectional use; unsuitable for space-constrained PCBs or high-speed lines due to >100 pF capacitance | Select only if peak surge current >15 A is required and board area permits SMC footprint. |
| Vishay ESDBLE5.0D1W | Bidirectional, same SOD323 package, lower VCL (14.5 V @ 12 A), but higher Cd (110 pF) and no AEC-Q101 qualification | Acceptable for consumer USB/I²C, but not certified for automotive environments requiring AEC-Q101 traceability | Prefer for cost-sensitive non-automotive designs where clamping voltage priority outweighs leakage and qualification needs. |
Compared with SZ1.5SMC5.0AT3G and ESDBLE5.0D1W, PESD5V0L1BA-Q uniquely balances AEC-Q101 compliance, 75 pF capacitance, and 33 V clamping in SOD323-making it optimal for automotive CAN, LIN, and USB 2.0 where size, speed, and qualification are jointly constrained.
Availability
PESD5V0L1BA-Q is available at Aetrix Electronics and suitable for automotive CAN bus protection, industrial HMI touch interfaces, and USB 2.0 data line safeguarding requiring stable component supply across production lifecycles.
Supply support for PESD5V0L1BA-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and analog solutions.
This device belongs to Nexperia's Automotive-Qualified ESD Protection portfolio, engineered specifically for robust transient suppression in safety-critical automotive subsystems-including powertrain, chassis, and body electronics-without compromising signal fidelity.
FAQ
What is the maximum operating temperature for PESD5V0L1BA-Q?
The PESD5V0L1BA-Q has a maximum junction temperature (Tj) of 150 °C and an ambient operating range of –65 °C to 150 °C. Its thermal resistance (Rthj-a) is optimized for SOD323 mounting on standard FR-4 PCBs with recommended solder land patterns per Figure 10 of the datasheet.
Can PESD5V0L1BA-Q protect both CAN H and CAN L simultaneously?
No-PESD5V0L1BA-Q protects a single bidirectional line. For full CAN bus protection, two devices are required: one for CAN H and one for CAN L, each installed with K1/K2 tied to ground and the anode side connected to the respective line.
Does this device require a series impedance for optimal ESD performance?
No external series resistor is required. The device's differential resistance (Rdiff = 80 Ω typical) and low clamping voltage enable direct connection between protected line and ground. Layout best practice mandates placement within 3 mm of the connector with minimized ground path inductance.
How does the 75 pF capacitance impact 100 Mbps Ethernet PHY lines?
75 pF exceeds typical Ethernet PHY tolerance (≤5 pF for 100BASE-TX), making PESD5V0L1BA-Q unsuitable for Ethernet physical layer protection. It is validated for CAN, LIN, USB 2.0, I²C, and audio lines where bandwidth ≤10 MHz and capacitance ≤100 pF are acceptable.
PESD5V0L1BA-QX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SC-76, SOD-323
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 7V
- Voltage - Clamping (Max) @ Ipp:
- 33V
- Current - Peak Pulse (10/1000µs):
- 15A (8/20µs)
- Power - Peak Pulse:
- 500W
- Power Line Protection:
- No
- Applications:
- CAN, Telecom
- Capacitance @ Frequency:
- 75pF @ 1MHz
- Operating Temperature:
- -65°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-323
PESD5V0L1BA-QX FAQ
1.How can I place an order for PESD5V0L1BA-QX through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0L1BA-QX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0L1BA-QX reliable?
The price and inventory of PESD5V0L1BA-QX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0L1BA-QX is usually 5 days.
3.What payment methods are accepted for PESD5V0L1BA-QX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0L1BA-QX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0L1BA-QX?
PESD5V0L1BA-QX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0L1BA-QX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0L1BA-QX?
For technical support, including PESD5V0L1BA-QX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0L1BA-QX requirements.
6.How does Aetrix verify that PESD5V0L1BA-QX is sourced from the original manufacturer or authorized distributors?
All PESD5V0L1BA-QX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0L1BA-QX meets industry standards.
7.What is the process for return or replacement of PESD5V0L1BA-QX?
All PESD5V0L1BA-QX units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0L1BA-QX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0L1BA-QX part is unused and in its original packaging.
Return procedure for PESD5V0L1BA-QX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0L1BA-QX Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
