My Inquiry
My Account
Nexperia USA Inc. PESD5V0S1BLD-QYL
- Part No.:
- PESD5V0S1BLD-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 2-XDFN
- Datasheet:
-
PESD5V0S1BLD-QYL.pdf
- Description:
- PESD5V0S1BLD-Q/SOD882D/DFN1006
- Quantity:
- Payment:
- Shipping:
Inventory:8,316
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0S1BLD-Q from Nexperia is a bidirectional ESD protection diode in SOD882D (DFN1006D-2) package, designed to protect one signal line against IEC 61000-4-2 level 4 ESD (±30 kV contact) and IEC 61000-4-5 surge (12 A, 8/20 µs). It features 5 V reverse standoff voltage, 35 pF typical capacitance, and 14 V clamping voltage at 12 A - ideal for high-speed USB, HDMI, or audio interfaces in automotive and portable electronics.
For engineers reviewing the PESD5V0S1BLD-Q datasheet, PESD5V0S1BLD-Q pinout, PESD5V0S1BLD-Q application, or PESD5V0S1BLD-Q equivalent, key selection criteria include low clamping voltage under surge, ultra-low leakage (<5 nA), AEC-Q101 qualification, side-wettable flanks for solder inspection, and minimal 0.37 mm height for space-constrained PCB layouts.
Technical Context
This device implements a symmetric bidirectional TVS structure with two back-to-back Zener-like junctions, enabling clamping of both positive and negative transients on a single line without polarity constraints. Its dynamic resistance is 0.1 Ω (typ.) at ±10 A TLP pulse, ensuring rapid voltage suppression during fast ESD events.
The SOD882D package integrates solderable side pads for automated optical inspection (AOI) and reflow process control, while its 1.0 mm × 0.6 mm footprint supports high-density routing near connectors. The device operates across –55 °C to +150 °C ambient, validated per AEC-Q101 for under-hood automotive use.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - defines maximum continuous operating voltage before conduction begins; ensures no interference with 3.3 V or 5 V logic signaling. |
| Clamping Voltage | 14 V at 12 A (8/20 µs) - limits transient voltage seen by downstream ICs to safe levels during surge events. |
| Diode Capacitance | 35 pF (typ.) at 1 MHz, 0 V - low enough for USB 2.0 (480 Mbps) and audio lines without signal integrity degradation. |
| ESD Rating | ±30 kV contact discharge (IEC 61000-4-2 Level 4) - exceeds industrial and automotive immunity requirements. |
| Peak Pulse Power | 130 W (8/20 µs) - sustains high-energy surges without thermal runaway or parametric shift. |
| Leakage Current | 5 nA (typ.) at 5 V - negligible loading on high-impedance sensor or analog signal paths. |
| Package | SOD882D (DFN1006D-2): 1.0 × 0.6 × 0.37 mm - enables placement directly at board edge connectors with minimal trace inductance. |
Pinout & Package
SOD882D is a 2-terminal leadless plastic package with visible side-wettable flanks for solder joint inspection. Body dimensions: 1.0 mm × 0.6 mm × 0.37 mm (typ.), pitch = 0.65 mm. Cathode identification is via marking bar on top surface; reading direction aligns with cathode bar orientation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode 1) | One terminal of the bidirectional clamping junction; connects to protected signal line. |
| 2 | K2 (Cathode 2) | Second terminal of the symmetric junction; connects to system ground or reference plane. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Protects AC-coupled or dual-polarity signals (e.g., USB D+/D−, audio differential pairs) without polarity biasing. |
| Side-wettable flanks | Enables automated X-ray or AOI verification of solder fillet formation - critical for automotive zero-defect manufacturing. |
| AEC-Q101 qualification | Validated for automotive applications including infotainment, ADAS sensors, and body control modules. |
| Ultra-low profile | 0.37 mm height allows integration beneath mechanical shields or in stacked-board assemblies. |
| Low dynamic resistance | 0.1 Ω (typ.) ensures minimal voltage overshoot during sub-nanosecond ESD rise times. |
Applications
| USB 2.0 Interface Protection | HDMI Hot-Plug Detection Line |
|---|---|
|
Use Scenario: Protecting D+ and D− lines of USB 2.0 ports on automotive head units and industrial HMIs against ESD from user insertion/removal. IC Role / Device Role: Bidirectional transient voltage suppressor placed within 2 mm of USB connector pins. Use Value: Prevents latch-up or damage to USB transceivers while maintaining <35 pF capacitance to preserve signal integrity up to 480 Mbps. |
Use Scenario: Safeguarding HDMI HPD (Hot-Plug Detect) line in display subsystems against ESD during cable mating in automotive rear-seat entertainment systems. IC Role / Device Role: Low-leakage (5 nA) clamp that avoids false HPD toggling while surviving ±30 kV contact discharge. Use Value: Eliminates need for external RC filtering on HPD, reducing BOM count and PCB area without compromising detection reliability. |
| Automotive Audio Differential Pair | Portable Medical Sensor Interface |
|
Use Scenario: Protecting balanced analog audio lines (e.g., LIN-based microphone inputs) in vehicle cabin microphones against ESD from human touch. IC Role / Device Role: Symmetric bidirectional clamp preserving common-mode rejection ratio (CMRR) of differential receivers. Use Value: Maintains signal fidelity with <0.1 Ω dynamic resistance and avoids DC offset shift due to ultra-low IRM. |
Use Scenario: Shielding analog front-end inputs of handheld ECG or pulse oximeter devices from ESD during clinical handling. IC Role / Device Role: Low-capacitance, low-leakage protector compatible with high-impedance biopotential amplifiers. Use Value: Ensures baseline stability and noise floor integrity while meeting IEC 61000-4-2 Level 4 immunity for medical-grade certification. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | Higher capacitance (65 pF typ.), higher clamping (19 V at 12 A), same SOD-923 package but no side-wettable flanks. | Less suitable for >100 Mbps data lines; lacks AEC-Q101 qualification. | Select when cost is primary constraint and speed/certification requirements are relaxed. |
| Vishay ESDE05V55D04 | Lower capacitance (12 pF), higher VRWM (5.5 V), DFN1006-2 package with side-wettable flanks, AEC-Q101 qualified. | Better for RF or high-speed serial links; slightly higher standoff voltage may reduce margin on 5 V rails. | Prefer for designs requiring <15 pF capacitance or tighter voltage tolerance, accepting minor footprint variance. |
Compared with NUP4105MR6T1G and ESDE05V55D04, PESD5V0S1BLD-Q delivers optimal balance of low clamping (14 V), certified automotive qualification, and manufacturable side-wettable flanks - making it the default choice for production-grade USB, audio, and sensor interfaces where reliability and process control are mandatory.
Availability
PESD5V0S1BLD-Q is available at Aetrix Electronics and suitable for automotive infotainment systems, portable medical devices, and industrial USB peripherals requiring stable component supply, long-term lifecycle support, and AEC-Q101-compliant ESD protection.
Supply support for PESD5V0S1BLD-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and bipolar transistors.
This device belongs to Nexperia's Automotive-qualified ESD Protection Diode product line, engineered specifically for robust transient suppression in safety-critical and high-reliability electronic systems.
FAQ
What is the maximum peak pulse current this diode can handle?
The PESD5V0S1BLD-Q is rated for 12 A peak pulse current (IPPM) under IEC 61000-4-5 8/20 µs surge conditions, measured between pins 1 and 2. This rating is validated per absolute maximum limits and confirmed in the datasheet's Table 5 and Figure 2 waveform definition.
Does this part support automated optical inspection (AOI) during PCB assembly?
Yes - the SOD882D package features side-wettable flanks that expose solder along the lateral edges, enabling reliable AOI and X-ray inspection of solder joint quality. This capability is explicitly supported in Nexperia's soldering guidelines (Figure 12) and required for AEC-Q101-compliant automotive production.
Can PESD5V0S1BLD-Q be used on a 3.3 V I/O line without leakage concerns?
Yes - at 3.3 V reverse bias, the typical leakage current is well below 1 nA (extrapolated from 5 nA at 5 V and Figure 7's temperature-dependent curve), posing no measurable load on 3.3 V CMOS or analog inputs, even at elevated temperatures up to 125 °C.
How does the bidirectional architecture affect placement on differential signal pairs?
The symmetric K1–K2 structure allows direct placement across any bidirectional line (e.g., USB D+, D−, or audio ±) without orientation sensitivity. Unlike unidirectional diodes, it eliminates risk of reverse-bias failure during negative transients and requires no ground-referenced bias network.
PESD5V0S1BLD-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 2-XDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- 14V
- Current - Peak Pulse (10/1000µs):
- 12A (8/20µs)
- Power - Peak Pulse:
- 130W
- Power Line Protection:
- No
- Applications:
- Telecom
- Capacitance @ Frequency:
- 35pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- DFN1006D-2
PESD5V0S1BLD-QYL FAQ
1.How can I place an order for PESD5V0S1BLD-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0S1BLD-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0S1BLD-QYL reliable?
The price and inventory of PESD5V0S1BLD-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0S1BLD-QYL is usually 5 days.
3.What payment methods are accepted for PESD5V0S1BLD-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0S1BLD-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0S1BLD-QYL?
PESD5V0S1BLD-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0S1BLD-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0S1BLD-QYL?
For technical support, including PESD5V0S1BLD-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0S1BLD-QYL requirements.
6.How does Aetrix verify that PESD5V0S1BLD-QYL is sourced from the original manufacturer or authorized distributors?
All PESD5V0S1BLD-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0S1BLD-QYL meets industry standards.
7.What is the process for return or replacement of PESD5V0S1BLD-QYL?
All PESD5V0S1BLD-QYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0S1BLD-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0S1BLD-QYL part is unused and in its original packaging.
Return procedure for PESD5V0S1BLD-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0S1BLD-QYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
