My Inquiry
My Account
Nexperia USA Inc. PESD5V0U1BLD-QYL
- Part No.:
- PESD5V0U1BLD-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 2-XDFN
- Datasheet:
-
PESD5V0U1BLD-QYL.pdf
- Description:
- PESD5V0U1BLD-Q/SOD882D/XSON2
- Quantity:
- Payment:
- Shipping:
Inventory:3,108
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0U1BLD-Q from Nexperia is a bidirectional ESD protection diode in SOD882D (DFN1006D-2) package, designed to safeguard high-speed signal lines against ±10 kV IEC 61000-4-2 contact discharge transients. It delivers ultra-low 2.9 pF capacitance, 5 V reverse standoff voltage, and 5 nA leakage current for minimal signal distortion in automotive-grade interfaces.
For engineers reviewing the PESD5V0U1BLD-Q datasheet, PESD5V0U1BLD-Q pinout, PESD5V0U1BLD-Q application, or PESD5V0U1BLD-Q equivalent, this device is selected for high-fidelity data line protection where low capacitance, AEC-Q101 qualification, and side-wettable flanks for solder inspection are critical design requirements.
Technical Context
This dual-cathode bidirectional TVS diode operates symmetrically across both polarities, clamping transients with a typical breakdown voltage of 7 V and dynamic resistance of 0.8 Ω under 10 A TLP pulses. Its layout uses two anti-parallel diodes sharing a common ground reference point.
The SOD882D package integrates solderable side pads for automated optical inspection and reflow process control, with a 0.37 mm typical height enabling placement on dense PCBs near connectors without mechanical interference.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous operating voltage before conduction begins; ensures no interference with 3.3 V or 5 V logic signaling. |
| Diode Capacitance | 2.9 pF (typ.) at 1 MHz - Preserves signal integrity on USB 2.0, HDMI, and MIPI D-PHY lines up to 480 Mbps. |
| ESD Withstand | ±10 kV contact per IEC 61000-4-2 Level 4 - Meets automotive infotainment and ADAS interface immunity requirements. |
| Leakage Current | 5 nA (typ.) at 5 V - Minimizes power loss and avoids false triggering in battery-powered portable electronics. |
| Breakdown Voltage | 7 V (typ.) at 5 mA - Defines clamping onset threshold; ensures fast response before downstream IC damage occurs. |
| Dynamic Resistance | 0.8 Ω (typ.) at 10 A TLP - Limits clamping voltage rise during surge events, reducing stress on protected IC I/O pins. |
Pinout & Package
Package: SOD882D (DFN1006D-2), leadless ultra-small surface-mount plastic package; 1.0 mm × 0.6 mm × 0.4 mm body; visible and solderable side pads; 0.65 mm pitch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode of diode 1 | Forms one half of the bidirectional clamp; connects to signal line when polarity is positive relative to ground. |
| 2 (K2) | Cathode of diode 2 | Forms complementary half of clamp; conducts when signal polarity reverses, enabling symmetrical transient suppression. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Enables protection of AC-coupled or differential lines (e.g., USB D+/D−) without polarity constraints. |
| Solderable side pads | Supports automated optical inspection (AOI) and X-ray verification of solder joint quality in automotive production. |
| AEC-Q101 qualification | Validated for automotive applications including infotainment head units and camera modules requiring extended temperature operation. |
| Ultra-low 0.37 mm height | Permits placement adjacent to fine-pitch connectors and under shields without mechanical conflict in slim form factors. |
Applications
| USB 2.0 Interface Protection | HDMI Signal Line Protection |
|---|---|
Use Scenario: Protecting D+ and D− lines of USB 2.0 ports in automotive infotainment systems against ESD events during cable insertion. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed directly at the USB connector, clamping surges before they reach the USB transceiver IC. Use Value: 2.9 pF capacitance prevents signal edge degradation, maintaining eye diagram compliance at 480 Mbps while surviving ±10 kV contact discharge. |
Use Scenario: Shielding TMDS clock and data channels in automotive rear-seat entertainment displays from ESD induced by user touch. IC Role / Device Role / Timing Role: Low-capacitance ESD clamp mounted at HDMI receptacle, referenced to chassis ground to minimize loop inductance. Use Value: Sub-3 pF loading preserves 165 MHz TMDS timing margins; AEC-Q101 qualification ensures reliability over -40 °C to +125 °C ambient. |
| MIPI D-PHY Camera Interface | Automotive Audio Data Lines |
Use Scenario: Safeguarding high-speed differential pairs between image sensor and SoC in ADAS forward-facing cameras. IC Role / Device Role / Timing Role: Dual-cathode ESD diode placed per-lane at sensor flex connector, minimizing trace length to reduce inductive overshoot. Use Value: 0.8 Ω dynamic resistance limits clamping voltage to <12 V during 8/20 µs surges, preventing pixel corruption or sensor reset. |
Use Scenario: Protecting I²S and PDM audio data lines in vehicle cabin microphones and speaker amplifiers from handling ESD. IC Role / Device Role / Timing Role: Symmetric clamp on bidirectional audio bus, grounded via shortest possible path to avoid ground bounce coupling. Use Value: 5 nA leakage avoids DC offset accumulation in analog audio paths; 5 V VRWM matches standard audio IC supply domains. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor ESD9B5.0ST5G | Higher 12 pF capacitance; SOD-923 package; 30 kV air discharge rating but only 8 kV contact. | Less suitable for >100 Mbps data lines; taller profile (0.55 mm) limits placement density near fine-pitch connectors. | Select when higher air-discharge margin is prioritized over signal fidelity and board space. |
| Vishay VEML3020-001 | Unidirectional configuration; 0.5 pF capacitance; requires external bias network for bidirectional use. | Not drop-in compatible-requires redesign of grounding and biasing; lacks AEC-Q101 qualification. | Choose only for ultra-high-speed (>1 Gbps) unidirectional lines where sub-1 pF is mandatory and automotive qualification is not required. |
Compared with ESD9B5.0ST5G and VEML3020-001, PESD5V0U1BLD-Q uniquely balances 2.9 pF capacitance, ±10 kV contact ESD rating, AEC-Q101 qualification, and side-wettable flanks-making it optimal for space-constrained automotive serial data interfaces requiring production-ready manufacturability.
Availability
PESD5V0U1BLD-Q is available at Aetrix Electronics and suitable for automotive infotainment systems, high-speed camera modules, and portable consumer electronics requiring stable component supply and full traceability.
Supply support for PESD5V0U1BLD-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and bipolar transistors.
This device belongs to Nexperia's Automotive-qualified ESD Protection Diode product line, engineered specifically for robust transient suppression in safety-critical and high-data-rate automotive subsystems.
FAQ
What is the maximum operating temperature for PESD5V0U1BLD-Q?
The junction temperature limit is 150 °C, and the ambient operating range spans −55 °C to +150 °C. This enables deployment in engine bay proximity sensors and under-hood ECUs where thermal cycling exceeds standard commercial-grade components.
Does PESD5V0U1BLD-Q require external biasing or series resistors?
No external biasing or series resistors are needed. The device operates passively as a voltage-triggered clamp, with cathodes tied directly to the protected line and ground. Its bidirectional architecture eliminates polarity dependency.
How does the SOD882D package support automated optical inspection (AOI)?
The SOD882D features exposed side pads that reflect light uniformly during AOI scanning, enabling reliable detection of solder bridging, insufficient wetting, and misalignment-critical for zero-defect automotive manufacturing standards.
Is PESD5V0U1BLD-Q compliant with RoHS and REACH regulations?
Yes. Nexperia confirms full compliance with EU RoHS Directive 2011/65/EU and REACH Regulation (EC) No. 1907/2006, including restriction of SVHC substances below threshold levels, as documented in its official material declarations.
PESD5V0U1BLD-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 2-XDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- Telecom
- Capacitance @ Frequency:
- 2.9pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- DFN1006D-2
PESD5V0U1BLD-QYL FAQ
1.How can I place an order for PESD5V0U1BLD-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0U1BLD-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0U1BLD-QYL reliable?
The price and inventory of PESD5V0U1BLD-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0U1BLD-QYL is usually 5 days.
3.What payment methods are accepted for PESD5V0U1BLD-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0U1BLD-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0U1BLD-QYL?
PESD5V0U1BLD-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0U1BLD-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0U1BLD-QYL?
For technical support, including PESD5V0U1BLD-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0U1BLD-QYL requirements.
6.How does Aetrix verify that PESD5V0U1BLD-QYL is sourced from the original manufacturer or authorized distributors?
All PESD5V0U1BLD-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0U1BLD-QYL meets industry standards.
7.What is the process for return or replacement of PESD5V0U1BLD-QYL?
All PESD5V0U1BLD-QYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0U1BLD-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0U1BLD-QYL part is unused and in its original packaging.
Return procedure for PESD5V0U1BLD-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0U1BLD-QYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
