My Inquiry
My Account
Nexperia USA Inc. PMEG060V030EPDZ
- Part No.:
- PMEG060V030EPDZ
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Diodes
- Package:
- TO-277, 3-PowerDFN
- Datasheet:
-
PMEG060V030EPDZ.pdf
- Description:
- DIODE SCHOTTKY 60V 3A CFP15
- Quantity:
- Payment:
- Shipping:
Inventory:3,455
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PMEG060V030EPDZ from Nexperia is a 60 V, 3 A low forward-voltage Schottky barrier rectifier in a CFP15 (SOT1289) surface-mount package, featuring integrated guard ring stress protection and clip-bonding for enhanced thermal performance. It serves as a high-efficiency freewheeling or reverse polarity protection diode in automotive DC-DC converters and industrial power supplies.
For engineers reviewing the PMEG060V030EPDZ datasheet, PMEG060V030EPDZ pinout, PMEG060V030EPDZ application, or PMEG060V030EPDZ equivalent, key selection criteria include its 460 mV typical VF at 3 A, AEC-Q101 qualification, 0.78 mm profile, and dual-anode cathode-terminal configuration for high-current SMD rectification.
Technical Context
This MEGA Schottky rectifier uses planar silicon construction with an integrated guard ring to improve ruggedness against voltage transients and ESD stress. Its clip-bonded die attach and exposed cathode thermal pad enable low Rth(j-sp) of 3 K/W and support continuous 3 A average forward current at Tsp ≤ 165 °C.
The device exhibits ultra-fast recovery (trr = 11–12 ns), negligible minority-carrier storage, and low capacitance (120 pF at 10 V), making it suitable for high-frequency switching topologies up to 20 kHz. Reverse leakage remains under 200 µA at 60 V and 25 °C, and under 34 mA at 125 °C.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VF @ 3 A | 460–530 mV at 25 °C - enables >95% efficiency in 5–12 V output DC-DC stages |
| VR | 60 V maximum - supports 48 V nominal bus systems with 20% margin |
| IF(AV) | 3 A square-wave average - sustains continuous conduction in buck/flyback freewheel paths |
| IR @ 60 V | 75–200 µA at 25 °C - minimizes standby power loss in always-on automotive modules |
| Rth(j-sp) | 3 K/W - allows direct thermal coupling to PCB copper pour for passive cooling |
| trr | 11–12 ns - eliminates reverse recovery spikes in synchronous rectifier replacement |
| AEC-Q101 | Qualified - certified for under-hood automotive use including engine control and ADAS power rails |
Pinout & Package
Encapsulated in a thermally enhanced CFP15 (SOT1289) plastic SMD package measuring 5.8 × 4.3 × 0.78 mm, with exposed cathode tab for solder-level heat dissipation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (A) | Anode | Primary high-side connection; electrically tied to Pin 2 for parallel current sharing |
| 2 (A) | Anode | Secondary anode terminal; used with Pin 1 to reduce bond wire inductance and thermal resistance |
| 3 (K) | Cathode | Thermally and electrically critical terminal; large exposed metal pad for PCB heat sinking and low-inductance return path |
Key Features
| Feature | Design Value |
|---|---|
| Low VF architecture | 460 mV typ. at 3 A - reduces conduction loss by ≥30% vs. standard Schottky diodes in 12 V input converters |
| Guard ring integration | Enhanced edge termination - improves surge robustness to ISO 7637-2 pulse 5a without derating |
| Clip-bonding technology | Direct copper-to-die interconnect - lowers thermal resistance and increases IFSM to 120 A (8 ms) |
| Ultra-thin profile | 0.78 mm max height - enables compact stacking in space-constrained infotainment and ADAS modules |
| AEC-Q101 qualification | Stress-tested per automotive discrete standard - validated for 15-year field life in -40 °C to 125 °C ambient |
Applications
| Automotive Body Control Module (BCM) | Industrial 24 V DC-DC Converter |
|---|---|
|
Use Scenario: Reverse polarity protection on 12 V battery input rail of door module ECU. IC Role / Device Role / Timing Role: Unidirectional blocking diode preventing damage during jump-start misconnection. Use Value: 460 mV VF limits voltage drop to <0.5 V at 3 A, preserving brown-out margin for microcontroller operation. |
Use Scenario: Freewheeling path in 24 V input, 5 V/3 A isolated flyback converter for PLC I/O power. IC Role / Device Role / Timing Role: High-speed synchronous rectifier replacement enabling >92% full-load efficiency. Use Value: 12 ns trr eliminates snubber losses and EMI from reverse recovery ringing. |
| LED Headlamp Driver | USB-C Power Delivery Adapter |
|
Use Scenario: Output rectification in 48 V to 12 V buck converter supplying adaptive LED matrix. IC Role / Device Role / Timing Role: Low-loss output diode handling pulsed 3 A loads with minimal thermal rise. Use Value: 3 K/W Rth(j-sp) allows stable operation at 100 °C ambient without heatsink. |
Use Scenario: Secondary-side rectification in 20 V/3 A USB PD 3.0 adapter with GaN primary. IC Role / Device Role / Timing Role: Fast-recovery, low-capacitance diode minimizing switching node oscillation. Use Value: 120 pF Cd at 10 V reduces capacitive coupling noise into feedback circuitry. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay VS-3EYH06-M3/45 | Same 60 V VR, 3 A IF(AV), but VF = 520 mV min at 3 A; TO-277 package (3.5 mm height) | Larger footprint and 4.5× higher Rth(j-a); unsuitable for ultra-thin automotive modules | Prefer when board-level mechanical clearance >3.0 mm and thermal pad attachment is not feasible |
| ON Semiconductor NSR30C60HT1G | 60 V VR, 3 A IF(AV), VF = 490 mV typ; SOD-123FL package (1.7 mm height); no AEC-Q101 cert | No guard ring; IR = 300 µA at 60 V/25 °C; lacks automotive qualification and transient ruggedness | Select only for cost-sensitive non-automotive consumer power supplies with relaxed reliability requirements |
Compared with VS-3EYH06-M3/45 and NSR30C60HT1G, PMEG060V030EPDZ delivers lowest VF in its class, smallest height, AEC-Q101 validation, and integrated guard ring-making it the sole choice for space-constrained, high-reliability automotive power rails.
Availability
PMEG060V030EPDZ is available at Aetrix Electronics and suitable for automotive body electronics, industrial DC-DC converters, and LED driver power supplies requiring stable component supply across multi-year production cycles.
Supply support for PMEG060V030EPDZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability essential semiconductors, with leadership in logic, discretes, and MOSFETs for automotive, industrial, and mobile markets.
This device belongs to Nexperia's MEGA Schottky rectifier product line, engineered specifically for high-efficiency, low-profile power conversion in automotive and industrial environments where thermal performance and AEC-Q101 compliance are mandatory.
FAQ
What is the maximum junction temperature rating for PMEG060V030EPDZ?
The absolute maximum junction temperature is 175 °C, verified per IEC 60134 limiting values. Operation at this limit requires strict thermal design: mounting on ≥1 cm² cathode copper pour, with Rth(j-sp) = 3 K/W and Tsp ≤ 165 °C. Derating applies above 125 °C ambient.
Does PMEG060V030EPDZ support bidirectional current flow?
No-it is a unidirectional Schottky rectifier. Current flows only from anode (Pins 1 and 2) to cathode (Pin 3). Reverse conduction is blocked up to 60 V, with leakage limited to 200 µA at 25 °C. It cannot function as a bidirectional switch or TVS device.
Can PMEG060V030EPDZ be used in place of a standard PN-junction rectifier?
Yes, with significant benefits: zero reverse recovery charge, 460 mV VF vs. ~900 mV for PN diodes at 3 A, and no minority-carrier tail current. However, its higher IR at elevated temperature requires verification in high-ambient applications like under-hood power supplies.
Is the cathode pad on PMEG060V030EPDZ electrically isolated from the PCB ground plane?
No-the cathode (Pin 3) is directly connected to the exposed metal pad, which must be soldered to a PCB copper area serving as both electrical return and thermal sink. That copper area is part of the circuit's low-impedance cathode path and should not be isolated unless explicitly designed as a floating thermal pad (not recommended).
PMEG060V030EPDZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- TO-277, 3-PowerDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Not For New Designs
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 60 V
- Current - Average Rectified (Io):
- 3A
- Voltage - Forward (Vf) (Max) @ If:
- 530 mV @ 3 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 12 ns
- Current - Reverse Leakage @ Vr:
- 200 µA @ 60 V
- Capacitance @ Vr, F:
- 350pF @ 1V, 1MHz
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- CFP15
- Operating Temperature - Junction:
- 175°C (Max)
PMEG060V030EPDZ FAQ
1.How can I place an order for PMEG060V030EPDZ through Aetrix?
Please submit a Request for Quotation (RFQ) for PMEG060V030EPDZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PMEG060V030EPDZ reliable?
The price and inventory of PMEG060V030EPDZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PMEG060V030EPDZ is usually 5 days.
3.What payment methods are accepted for PMEG060V030EPDZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PMEG060V030EPDZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PMEG060V030EPDZ?
PMEG060V030EPDZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PMEG060V030EPDZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PMEG060V030EPDZ?
For technical support, including PMEG060V030EPDZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PMEG060V030EPDZ requirements.
6.How does Aetrix verify that PMEG060V030EPDZ is sourced from the original manufacturer or authorized distributors?
All PMEG060V030EPDZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PMEG060V030EPDZ meets industry standards.
7.What is the process for return or replacement of PMEG060V030EPDZ?
All PMEG060V030EPDZ units undergo pre-shipment inspection (PSI). If there is an issue with PMEG060V030EPDZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PMEG060V030EPDZ part is unused and in its original packaging.
Return procedure for PMEG060V030EPDZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PMEG060V030EPDZ Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
