Nexperia USA Inc. PMEG2015EH,115

Overview

PMEG2015EH,115 from Nexperia is a planar Schottky barrier rectifier in SOD123F package, designed for low-voltage, high-efficiency DC-to-DC conversion and reverse polarity protection. It delivers 1.5 A forward current at ≤20 V reverse voltage, with typical forward voltage of 560 mV at 1.5 A, enabling minimal conduction loss in compact power rails.

For engineers reviewing the PMEG2015EH,115 datasheet, PMEG2015EH,115 pinout, PMEG2015EH,115 application, or PMEG2015EH,115 equivalent, key selection criteria include ultra-low VF performance, thermal resistance (Rth(j-sp) = 60 K/W), SOD123F footprint compatibility, and validated operation up to 150 °C junction temperature.

Technical Context

This Schottky diode uses a planar MEGA structure with integrated guard ring for enhanced ESD and surge robustness. Its low barrier height enables sub-660 mV VF at full rated current while maintaining <70 μA IR at 20 V VR.

Thermal design relies on direct junction-to-solder-point conduction (Rth(j-sp) = 60 K/W) rather than ambient dissipation, making PCB copper pad layout critical for sustained 1.5 A operation. Reverse recovery is effectively zero, eliminating switching losses in high-frequency SMPS.

Key Specifications

Pinout & Package

Package: SOD123F - small-outline, flat lead surface-mount plastic package (3.6 × 2.7 × 1.1 mm), optimized for reflow soldering and high-density layouts.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar Schottky rectifier applications.

Compared with RB520S-30T1G and SS12, PMEG2015EH,115 uniquely balances 1.5 A capability, 560 mV VF, and SOD123F size-enabling high-density, thermally efficient rectification where both current and board area are constrained.

Availability

PMEG2015EH,115 is available at Aetrix Electronics and suitable for USB power delivery protection, point-of-load DC/DC converters, and industrial sensor node power requiring stable component supply across long-lifecycle embedded programs.

Supply support for PMEG2015EH,115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in advanced packaging and automotive-qualified components.

PMEG2015EH,115 belongs to the MEGA Schottky rectifier product line, engineered specifically for efficiency-critical low-voltage power management in space-constrained consumer, industrial, and computing applications.

FAQ

What is the maximum allowable soldering temperature profile for PMEG2015EH,115?

Reflow soldering is the only recommended method per Nexperia's data sheet. Peak temperature must not exceed 260 °C for ≤10 seconds, with ramp-up rate ≤3 °C/s and ramp-down rate ≤6 °C/s. Wave soldering and hand soldering are explicitly discouraged due to thermal stress on the SOD123F mold compound and bond wires.

Can PMEG2015EH,115 replace a standard PN-junction diode in a 12 V automotive circuit?

Yes - its 20 V VR rating and 150 °C Tj make it suitable for 12 V systems, but only where reverse leakage and forward drop matter. Unlike PN diodes, it has no reverse recovery time and 560 mV VF vs. ~700–900 mV, reducing heat generation. However, IR rises faster with temperature than PN diodes, so verify leakage at end-of-life junction conditions.

Is the SOD123F package compatible with automated optical inspection (AOI)?

Yes - the SOD123F's flat leads, consistent marking bar, and defined cathode orientation (pin 1) enable reliable AOI detection. The "AD" top-side marking is laser-etched and contrast-enhanced for high-accuracy machine vision systems operating at ≥10 µm resolution.

Does PMEG2015EH,115 require derating above 55 °C ambient?

Yes - the 1.5 A rating applies only when solder point temperature (Tsp) ≤55 °C. For every 10 °C rise in Tsp above 55 °C, IF must be linearly derated by ~0.1 A. At Tsp = 85 °C, maximum continuous IF drops to 1.2 A, based on thermal resistance and power dissipation limits in the data sheet.