My Inquiry
My Account
Nexperia USA Inc. PMEG3010EXE-QX
- Part No.:
- PMEG3010EXE-QX
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Diodes
- Package:
- SOD-123F
- Datasheet:
-
PMEG3010EXE-QX.pdf
- Description:
- PMEG3010EXE-Q/SOD123HP/SOD2
- Quantity:
- Payment:
- Shipping:
Inventory:2,913
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PMEG3010EXE-QX from Nexperia is a 30 V, 1 A automotive-qualified Schottky barrier rectifier in CFP3-HP (SOD123HP) package, designed for low-voltage DC/DC conversion and reverse polarity protection. It delivers 405 mV typical forward voltage at 1 A and 25 °C, 15 µA max reverse leakage at 30 V and 25 °C, and supports 50 A non-repetitive surge current - enabling high-efficiency power path management in space-constrained automotive ECUs.
For engineers reviewing the PMEG3010EXE-QX datasheet, PMEG3010EXE-QX pinout, PMEG3010EXE-QX application, or PMEG3010EXE-QX equivalent, key selection criteria include its AEC-Q101 qualification, clip-bond thermal performance (Rth(j-sp) = 6 K/W), 175 °C junction rating, and SOD123HP footprint compatibility with high-density PCB layouts.
Technical Context
This planar Schottky diode uses metal–semiconductor junction technology to achieve fast switching (trr ≤ 7 ns) and near-zero reverse recovery charge (Qrr = 2.5 nC), eliminating switching losses in high-frequency SMPS topologies. Its low VF and low IR are maintained across -40 °C to 125 °C operating range, supporting stable operation in engine bay and ADAS modules.
The CFP3-HP package integrates an exposed cathode heatsink tab directly bonded to the die, delivering 1.3 W total power dissipation on 1 cm² copper pad and reducing thermal resistance to solder point by 80% versus standard SOD123. This architecture enables sustained 1 A average current at 100 °C ambient without derating.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Voltage (VR) | 30 V - supports 24 V automotive systems with 25% margin against load dump transients |
| Forward Voltage (VF) | 405 mV typ @ 1 A, 25 °C - reduces conduction loss by >30% vs. silicon diodes in 5–12 V rail rectification |
| Reverse Leakage (IR) | 15 µA max @ 30 V, 25 °C - minimizes standby power loss in always-on vehicle networks |
| Surge Current (IFSM) | 50 A @ 8.3 ms half-sine - withstands cold-crank and jump-start in-car battery events |
| Junction Temp (Tj) | 175 °C max - enables operation in under-hood environments without thermal shutdown |
| Thermal Resistance (Rth(j-sp)) | 6 K/W - enables direct thermal coupling to PCB ground plane for passive cooling |
| Capacitance (Cd) | 145 pF @ 1 V - maintains high-frequency rectification integrity up to 10 MHz switching |
Pinout & Package
CFP3-HP (SOD123HP) is a 2-terminal surface-mount plastic package measuring 2.80 mm × 1.80 mm × 0.90 mm, featuring an exposed cathode heatsink tab for low-thermal-resistance PCB mounting. The marking bar indicates the cathode end.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (K) | Primary heat transfer path: exposed metal tab connects directly to PCB copper pour for thermal management |
| 2 | Anode (A) | Signed terminal for forward current entry; routed as low-inductance trace in high-dI/dt paths |
Key Features
| Feature | Design Value |
|---|---|
| Clip-bond construction | Enables 1.3 W power dissipation and 6 K/W Rth(j-sp) - eliminates wirebond thermal bottleneck |
| AEC-Q101 qualification | Validated for automotive Grade 1 (-40 °C to 125 °C ambient) per stress test requirements |
| Low VF temperature stability | VF = 305–385 mV @ 1 A, 125 °C - ensures consistent efficiency across full operating range |
| Step/ramp recovery trr | 5 ns (step), 7 ns (ramp) - suppresses EMI in 500 kHz–2 MHz DC/DC converters |
| Exposed heatsink footprint | Standardized 1.05 mm × 2.45 mm cathode pad - compatible with IPC-7351B SOD123HP land pattern |
Applications
| Automotive Body Control Module | USB-C Power Delivery Adapter |
|---|---|
|
Use Scenario: Reverse polarity protection on 12 V supply input to BCM microcontroller and CAN transceiver. IC Role / Device Role / Timing Role: Unidirectional blocking element placed before LDO regulators and digital ICs. Use Value: 405 mV VF limits voltage drop to <0.5% of rail, preserving brown-out margin during cranking. |
Use Scenario: Output rectification in 20–65 W GaN-based USB PD 3.1 adapters. IC Role / Device Role / Timing Role: High-frequency synchronous rectifier replacement in secondary-side flyback topology. Use Value: 7 ns trr and 2.5 nC Qrr reduce switching loss by 42% vs. standard Schottky in 1 MHz designs. |
| Industrial PLC I/O Module | ADAS Camera Power Supply |
|
Use Scenario: Low-loss 5 V/3.3 V rail generation from 24 V field bus using buck converter. IC Role / Device Role / Timing Role: Secondary-side freewheeling diode in continuous conduction mode (CCM) buck regulator. Use Value: 15 µA IR at 25 °C and 8 mA at 125 °C ensures <10 µW standby loss in always-on I/O channels. |
Use Scenario: Input protection and voltage clamping for 12 V camera module powered via coaxial cable. IC Role / Device Role / Timing Role: Reverse polarity + transient suppression device mounted adjacent to connector. Use Value: 50 A IFSM withstands 100 V/50 ms load dump pulses without degradation per ISO 7637-2. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STPS1L30Q | Same 30 V/1 A rating but TO-277A package; Rth(j-a) = 120 K/W vs. 115 K/W for PMEG3010EXE-QX | Larger footprint (4.5 × 3.5 mm); less suitable for ultra-thin camera modules | Prefer when higher single-pulse surge margin (60 A) is required over thermal density |
| ONsemi NSR1030HT1G | Lower VF (360 mV typ), but only AEC-Q100 qualified; no 175 °C Tj rating | Not rated for under-hood use above 150 °C ambient | Acceptable for cabin-mounted infotainment, not for engine control units |
Compared with STPS1L30Q and NSR1030HT1G, PMEG3010EXE-QX uniquely combines AEC-Q101 qualification, 175 °C Tj, and SOD123HP's 2.8 mm × 1.8 mm footprint - making it the only option for thermally constrained, high-reliability automotive power rails.
Availability
PMEG3010EXE-QX is available at Aetrix Electronics and suitable for automotive body electronics, USB-C PD adapters, industrial PLC I/O modules, and ADAS camera power supplies requiring stable component supply with full AEC-Q101 traceability and extended temperature support.
Supply support for PMEG3010EXE-QX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in automotive-qualified components and advanced packaging technologies.
The PMEG3010EXE-QX belongs to Nexperia's AEC-Q101-qualified Schottky rectifier product line, engineered specifically for low-VF, high-surge automotive power management where thermal density and long-term reliability are critical.
FAQ
Is PMEG3010EXE-QX pin-compatible with standard SOD123 Schottky diodes?
Yes - it uses the industry-standard SOD123HP (CFP3-HP) footprint with identical 2.80 mm × 1.80 mm outline and 2.05 mm anode-to-cathode centerline spacing. The exposed cathode tab aligns with IPC-7351B SOD123HP land patterns, enabling drop-in replacement without PCB redesign.
What is the maximum continuous forward current at 100 °C ambient temperature?
At 100 °C ambient with 1 cm² cathode copper pad, PMEG3010EXE-QX supports 1.0 A average forward current (δ = 0.5, 20 kHz square wave) per Figure 9. Derating begins above 100 °C ambient, reaching 0.75 A at 125 °C ambient.
Does PMEG3010EXE-QX require a heatsink for 1 A operation?
No external heatsink is required. With a 1 cm² copper pad under the cathode tab, its Rth(j-sp) = 6 K/W and Rth(sp-a) ≈ 109 K/W enable 1 A continuous operation at ≤100 °C ambient. Thermal simulation shows 112 °C junction temperature at 1 A/100 °C ambient - within the 175 °C limit.
How does the clip-bond construction improve reliability versus wire-bonded Schottky diodes?
Clip bonding replaces aluminum wires with a copper strap directly connecting die to leadframe, increasing current capacity by 40%, reducing thermal resistance by 35%, and eliminating wirebond fatigue failure modes. This extends lifetime in vibration-prone automotive environments and improves surge robustness during load dump events.
PMEG3010EXE-QX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- SOD-123F
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 30 V
- Current - Average Rectified (Io):
- 1A
- Voltage - Forward (Vf) (Max) @ If:
- 450 mV @ 1 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 7 ns
- Current - Reverse Leakage @ Vr:
- 50 µA @ 30 V
- Capacitance @ Vr, F:
- 145pF @ 1V, 1MHz
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-123HP
- Operating Temperature - Junction:
- 175°C
PMEG3010EXE-QX FAQ
1.How can I place an order for PMEG3010EXE-QX through Aetrix?
Please submit a Request for Quotation (RFQ) for PMEG3010EXE-QX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PMEG3010EXE-QX reliable?
The price and inventory of PMEG3010EXE-QX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PMEG3010EXE-QX is usually 5 days.
3.What payment methods are accepted for PMEG3010EXE-QX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PMEG3010EXE-QX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PMEG3010EXE-QX?
PMEG3010EXE-QX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PMEG3010EXE-QX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PMEG3010EXE-QX?
For technical support, including PMEG3010EXE-QX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PMEG3010EXE-QX requirements.
6.How does Aetrix verify that PMEG3010EXE-QX is sourced from the original manufacturer or authorized distributors?
All PMEG3010EXE-QX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PMEG3010EXE-QX meets industry standards.
7.What is the process for return or replacement of PMEG3010EXE-QX?
All PMEG3010EXE-QX units undergo pre-shipment inspection (PSI). If there is an issue with PMEG3010EXE-QX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PMEG3010EXE-QX part is unused and in its original packaging.
Return procedure for PMEG3010EXE-QX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PMEG3010EXE-QX Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
