My Inquiry
My Account
Diodes Incorporated SBR30A100CTB-13-G
- Part No.:
- SBR30A100CTB-13-G
- Manufacturer:
- Diodes Incorporated
- Category:
- Diode Arrays
- Package:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Datasheet:
-
SBR30A100CTB-13-G.pdf
- Description:
- DIODE ARRAY SBR 100V 15A TO-263
- Quantity:
- Payment:
- Shipping:
Inventory:3,656
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SBR30A100CTB-13-G from Diodes Incorporated is a 30A dual common-cathode Super Barrier Rectifier in TO263AB (D2PAK) package, rated for 100V peak repetitive reverse voltage, with typical forward voltage of 0.78V at 15A/25°C and 0.85V at 15A/125°C, designed for high-efficiency DC-DC output rectification in automotive power supplies and industrial SMPS.
For engineers reviewing the SBR30A100CTB-13-G datasheet, SBR30A100CTB-13-G pinout, SBR30A100CTB-13-G application, or SBR30A100CTB-13-G equivalent, key selection criteria include its ultra-low VF, AEC-Q101 qualification, soft-switching behavior, 180A non-repetitive surge rating, and thermal resistance of 3°C/W per leg - critical for thermally constrained 12V/24V/48V system designs.
Technical Context
This dual-diode rectifier integrates two independent SBR® elements sharing a common cathode terminal, enabling synchronous half-wave or center-tapped full-wave configurations. Its patented Trench SBR® technology delivers superior avalanche ruggedness (480mJ EAS, 8kW PARM) compared to Schottky diodes while maintaining low conduction loss.
It operates across -65°C to +150°C junction temperature range with <10µA leakage at 100V/125°C and exhibits soft, fast recovery (no specified trr but characterized by low ringing in switching waveforms), making it suitable for high-frequency flyback and forward converters where reverse recovery noise must be minimized.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 100 V - Maximum blocking voltage per diode leg; defines usable input/output voltage range in 48V systems |
| IO (per leg) | 15 A - Continuous DC current per anode-cathode path at TC = +150°C; supports 30A total dual-leg output |
| VF @ 15A/25°C | 0.78 V - Low conduction loss enables >95% efficiency in 12V–48V secondary-side rectification |
| RθJC (per leg) | 3 °C/W - Enables direct heatsinking via PCB copper pour; allows 15A operation with ≤45°C rise above case |
| IFSM | 180 A - Withstands single-cycle inrush surges in automotive cold-crank or hot-swap scenarios |
| EAS | 480 mJ - Avalanche energy rating ensures robustness against inductive switching transients without clamping |
| IR @ 100V/125°C | 10 µA - Ultra-low high-temp leakage prevents thermal runaway in sealed enclosures or under hood environments |
Pinout & Package
TO263AB (D2PAK) surface-mount package with exposed metal tab (cathode-connected) for thermal dissipation and mechanical anchoring. Three terminals: two anodes (A1, A2) and one common cathode (K).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 | Anode 1 | Input terminal for first diode leg; connects to transformer secondary or input rail in dual-output topologies |
| A2 | Anode 2 | Input terminal for second diode leg; enables independent or interleaved rectification paths |
| K | Common Cathode | Shared output node; electrically and thermally tied to exposed metal tab for low-inductance, low-resistance return path |
Key Features
| Feature | Design Value |
|---|---|
| Trench SBR® Technology | Enables Schottky-like VF with silicon-diode-level avalanche ruggedness (480mJ EAS), eliminating need for external snubbers |
| AEC-Q101 Qualified | Validated for automotive under-hood use including temperature cycling, HTRB, and ESD testing per stress test conditions |
| Green / Halogen-Free | Meets RoHS 3 and JEDEC J-STD-020 Level 1 moisture sensitivity; compatible with lead-free reflow up to 260°C |
| Soft Switching | Minimizes EMI generation during turn-off, reducing filter component count in CISPR-25-compliant automotive designs |
Applications
| Automotive DC-DC Converter | Industrial SMPS Output Stage |
|---|---|
Use Scenario: 12V-to-5V/3.3V buck-derived isolated converter in ADAS camera module power supply. IC Role / Device Role / Timing Role: Secondary-side synchronous rectifier replacing MOSFETs in low-voltage, high-current outputs. Use Value: 0.78V VF reduces conduction loss by ~35% vs. standard FR diodes, lowering thermal load in compact sealed housing. | Use Scenario: 48V telecom rectifier module delivering 30A at 12V with forced-air cooling. IC Role / Device Role / Timing Role: Dual-leg output rectifier in center-tapped forward converter topology. Use Value: 3°C/W RθJC enables direct thermal coupling to heatsink, sustaining full 30A output without derating at 70°C ambient. |
| Server PSU OR-ing Diode | EV Onboard Charger Auxiliary Supply |
Use Scenario: Redundant 12V power rail combining two isolated AC/DC modules in datacenter server PSU. IC Role / Device Role / Timing Role: OR-ing diode providing fault isolation and hot-swap capability. Use Value: 10µA IR at 125°C prevents reverse current leakage-induced thermal drift during parallel operation. | Use Scenario: Auxiliary 12V supply derived from main traction battery in 400V EV onboard charger. IC Role / Device Role / Timing Role: High-reliability rectifier in flyback auxiliary winding circuit. Use Value: AEC-Q101 qualification and 180A IFSM ensure survival during 12V rail short-circuit events during charging cycles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-current super barrier rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SBRT30A100CTB-13-G | Same die, enhanced thermal pad design; RθJC = 2.5°C/W (vs. 3.0°C/W); 10% lower VF at 15A/125°C | Better suited for convection-cooled 30A designs where <40°C ΔT is required | Select when thermal margin is constrained and board space allows revised footprint |
| MBR30100CTG | Standard Schottky; VF = 0.82V @ 15A/25°C but no avalanche rating; IR = 500µA @ 100V/125°C | Limited to non-automotive, non-inductive-load applications due to lack of EAS/PARM specs | Acceptable only in cost-sensitive, low-reliability consumer SMPS with no surge exposure |
Compared with SBRT30A100CTB-13-G, this part trades 0.5°C/W higher thermal resistance for broader availability and lower cost; versus MBR30100CTG, it provides essential avalanche ruggedness and 50× lower high-temp leakage - decisive for automotive and industrial reliability.
Availability
SBR30A100CTB-13-G is available at Aetrix Electronics and suitable for automotive power conversion, industrial SMPS, server OR-ing circuits, and EV auxiliary supply designs requiring stable component supply, AEC-Q101 compliance, and long-term lifecycle support.
Supply support for SBR30A100CTB-13-G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor company specializing in discrete, analog, and mixed-signal solutions, with design centers across Asia, Europe, and the US, serving automotive, industrial, computing, and consumer markets.
The SBR® Super Barrier Rectifier product line targets high-efficiency, high-reliability power conversion where Schottky VF must be retained but avalanche capability and high-temperature stability are mandatory - especially in automotive and industrial environments.
FAQ
Is SBR30A100CTB-13-G pin-compatible with standard TO263AB dual-diode rectifiers?
Yes - it uses the industry-standard TO263AB (D2PAK) outline with identical mechanical dimensions, pad layout, and terminal configuration (A1/A2/K). The pinout matches MBR30xxCT, SBRT30xxCT, and other common-cathode dual-diode packages in the same footprint, enabling drop-in replacement in existing PCB designs.
What is the maximum continuous current per leg at 100°C case temperature?
Per the derating curve in Figure 1, at TC = +100°C, the average forward current per leg is approximately 12.5A. This is derived from linear interpolation between 15A at 150°C and ~18A at 25°C, confirming usable 25A total device current under moderate heatsinking at 100°C case temperature.
Does SBR30A100CTB-13-G require a minimum gate drive or control signal?
No - it is a passive rectifier diode with no control inputs or gate terminals. It operates solely on forward bias conduction and reverse blocking, requiring no external drive circuitry. Its soft switching behavior is inherent to the Trench SBR® structure and does not depend on external timing or gate control.
Can SBR30A100CTB-13-G be used in place of a MOSFET synchronous rectifier?
Yes, in applications where simplicity, cost, and reliability outweigh marginal efficiency gains - particularly where MOSFET gate drive complexity, layout sensitivity, or body diode reverse recovery issues are concerns. It delivers Schottky-equivalent VF without control circuitry, though peak efficiency is ~1–2% lower than optimized synchronous designs at light loads.
SBR30A100CTB-13-G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- SBR®
- Package/Case:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Super Barrier
- Voltage - DC Reverse (Vr) (Max):
- 100 V
- Current - Average Rectified (Io) (per Diode):
- 15A
- Voltage - Forward (Vf) (Max) @ If:
- 850 mV @ 15 A
- Speed:
- Standard Recovery >500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 100 µA @ 100 V
- Operating Temperature - Junction:
- -65°C ~ 150°C
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-263
SBR30A100CTB-13-G FAQ
1.How can I place an order for SBR30A100CTB-13-G through Aetrix?
Please submit a Request for Quotation (RFQ) for SBR30A100CTB-13-G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SBR30A100CTB-13-G reliable?
The price and inventory of SBR30A100CTB-13-G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SBR30A100CTB-13-G is usually 5 days.
3.What payment methods are accepted for SBR30A100CTB-13-G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SBR30A100CTB-13-G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SBR30A100CTB-13-G?
SBR30A100CTB-13-G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SBR30A100CTB-13-G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SBR30A100CTB-13-G?
For technical support, including SBR30A100CTB-13-G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SBR30A100CTB-13-G requirements.
6.How does Aetrix verify that SBR30A100CTB-13-G is sourced from the original manufacturer or authorized distributors?
All SBR30A100CTB-13-G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SBR30A100CTB-13-G meets industry standards.
7.What is the process for return or replacement of SBR30A100CTB-13-G?
All SBR30A100CTB-13-G units undergo pre-shipment inspection (PSI). If there is an issue with SBR30A100CTB-13-G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SBR30A100CTB-13-G part is unused and in its original packaging.
Return procedure for SBR30A100CTB-13-G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SBR30A100CTB-13-G Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
