My Inquiry
My Account
Vishay General Semiconductor - Diodes Division SMF5V0A-E3-08
- Part No.:
- SMF5V0A-E3-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- DO-219AB
- Datasheet:
-
SMF5V0A-E3-08.pdf
- Description:
- TVS DIODE 5VWM 9.2VC SMF
- Quantity:
- Payment:
- Shipping:
Inventory:133,950
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SMF5V0A-E3-08 from Vishay Semiconductors is a unidirectional surface-mount ESD protection diode in DO-219AB (SOD-123W) package, rated for 5.0 V stand-off voltage, 9.2 V maximum clamping voltage at 21.7 A peak pulse current, and ±30 kV IEC 61000-4-2 ESD immunity. It protects USB 2.0 data lines, HDMI interfaces, and low-voltage I/O pins against electrostatic discharge.
For engineers reviewing the SMF5V0A-E3-08 datasheet, SMF5V0A-E3-08 pinout, SMF5V0A-E3-08 application, or SMF5V0A-E3-08 equivalent, key selection criteria include clamping voltage under 21.7 A surge, sub-1.1 mm height for space-constrained PCBs, and AEC-Q101 qualification for automotive infotainment ports.
Technical Context
This device operates as a single-channel transient voltage suppression (TVS) diode with avalanche breakdown behavior, designed to clamp fast-rising ESD transients within nanoseconds. Its low 1120 pF capacitance at 0 V enables use on high-speed digital lines without signal integrity degradation.
The SMF5V0A-E3-08 features a cathode-marked unidirectional configuration, optimized for DC-biased signal paths where reverse leakage must remain below 5 µA at 5 V. Its thermal resistance of 180 K/W supports reliable operation up to 175 °C junction temperature in compact layouts.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Stand-off Voltage (VRWM) | 5.0 V - Maximum continuous reverse voltage before significant leakage begins; sets operating margin for 3.3 V or 5 V logic rails. |
| Clamping Voltage (VC) | 9.2 V at 21.7 A - Peak voltage seen by protected circuit during 10/1000 µs surge; ensures downstream ICs remain below absolute max ratings. |
| Peak Pulse Power | 200 W (10/1000 µs) - Sustains short-duration surges common in handheld device handling and board-level ESD events. |
| ESD Immunity | ±30 kV contact / ±30 kV air (IEC 61000-4-2) - Meets highest industrial and automotive ESD test levels without failure. |
| Capacitance | 1120 pF at 0 V, 1 MHz - Low enough for USB 2.0 (480 Mbps) and HDMI 1.4 CEC lines; avoids signal rise-time degradation. |
| Package | DO-219AB (SOD-123W) - 3.9 × 1.9 × 1.08 mm footprint; compatible with standard SMT reflow profiles up to 260 °C peak. |
| AEC-Q101 Qualified | Yes - Validated for automotive applications including infotainment USB ports and sensor interface protection. |
Pinout & Package
DO-219AB (SOD-123W) package: 2-terminal surface-mount device with cathode marked by bar on top surface. Total height ≤ 1.08 mm, length 3.9 mm, width 1.9 mm. Mold compound UL 94 V-0 rated; MSL level 1 per J-STD-020.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Input side of protected line | Connected to signal trace upstream of IC input; conducts surge current toward ground when clamped. |
| Cathode | Ground reference node | Connected to system ground plane or local low-impedance return path; defines unidirectional conduction direction. |
Key Features
| Feature | Design Value |
|---|---|
| Low clamping voltage | 9.2 V at 21.7 A enables robust protection of 5 V-tolerant I/O without overvoltage stress. |
| "Low Noise" fast response | Nanosecond-scale turn-on time minimizes transient overshoot on high-speed data lines. |
| Wave and reflow solderable | Qualified for standard Pb-free reflow profiles (peak 260 °C), eliminating hand-soldering risk in production. |
| High ESD immunity | ±30 kV contact/air discharge exceeds IEC 61000-4-2 Level 4, covering worst-case human-handling scenarios. |
| AEC-Q101 qualified | Validated for automotive temperature range (-65 °C to +175 °C) and reliability requirements. |
Applications
| USB 2.0 Data Lines | HDMI CEC Channel |
|---|---|
Use Scenario: Protecting D+ and D- lines in portable USB peripherals against repeated plug/unplug ESD events. IC Role / Device Role / Timing Role: Unidirectional TVS diode placed between connector and USB transceiver IC input pins. Use Value: Clamps transients to ≤9.2 V while adding only 1120 pF capacitance, preserving signal integrity at 480 Mbps. | Use Scenario: Safeguarding HDMI Consumer Electronics Control (CEC) signaling line in AV receivers and set-top boxes. IC Role / Device Role / Timing Role: Standoff-rated protection element on 5 V-biased CEC bus, referenced to chassis ground. Use Value: Maintains <5 µA leakage at 5 V VRWM to avoid false CEC command triggering while surviving ±30 kV ESD. |
| Automotive Infotainment USB | Industrial Sensor Interface |
Use Scenario: ESD hardening of front-panel USB ports in automotive head units exposed to dry-climate static discharge. IC Role / Device Role / Timing Role: AEC-Q101-qualified TVS on USB 2.0 differential pair, mounted adjacent to connector. Use Value: Operates reliably across -65 °C to +175 °C ambient and delivers consistent clamping performance after thermal cycling. | Use Scenario: Protecting analog output lines (e.g., 4–20 mA transmitter outputs) in factory-floor PLC modules. IC Role / Device Role / Timing Role: Reverse-biased protection device on current-loop output, referenced to isolated ground. Use Value: Limits induced surge voltage to <9.2 V during lightning-induced transients, preventing op-amp saturation or DAC latch-up. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ5.0A | Higher clamping voltage (11.2 V at 21.1 A); larger SMA package (4.5 × 2.7 × 2.2 mm). | Less suitable for space-constrained USB 2.0 layouts; better for higher-power industrial surge zones. | Select SMAJ5.0A only if board area allows larger footprint and clamping voltage margin permits. |
| TPD2E001DRYR | Two-channel, bidirectional, lower capacitance (11 pF), but lower ESD rating (±8 kV contact). | Designed for high-speed data pairs (e.g., I²C, UART); not rated for ±30 kV or AEC-Q101. | Choose TPD2E001DRYR for dual-line protection where speed matters more than extreme ESD robustness. |
Compared with SMAJ5.0A and TPD2E001DRYR, the SMF5V0A-E3-08 uniquely balances ultra-low profile (1.08 mm height), ±30 kV ESD immunity, and AEC-Q101 qualification-making it optimal for automotive and portable USB/HDMI interfaces where board space and reliability are jointly constrained.
Availability
SMF5V0A-E3-08 is available at Aetrix Electronics and suitable for automotive infotainment systems, industrial USB peripherals, and HDMI-enabled consumer electronics requiring stable component supply and long-term lifecycle support.
Supply support for SMF5V0A-E3-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in power management, sensing, and protection devices with emphasis on reliability and automotive-grade validation.
The SMF series targets high-reliability ESD protection in space-constrained, high-volume applications such as automotive USB ports, industrial HMI interfaces, and consumer multimedia connectors.
FAQ
What is the maximum clamping voltage of the SMF5V0A-E3-08 under standard surge conditions?
The SMF5V0A-E3-08 has a maximum clamping voltage of 9.2 V when subjected to a 10/1000 µs waveform at 21.7 A peak pulse current. This value is specified in the Electrical Characteristics table of the Vishay datasheet (Doc. #85881, Rev. 2.4) and ensures protected circuits remain within safe voltage limits during ESD events. The SMF5V0A-E3-08 maintains this clamping performance across its full operating temperature range.
Is the SMF5V0A-E3-08 suitable for automotive applications?
Yes, the SMF5V0A-E3-08 is AEC-Q101 qualified and rated for operation from -65 °C to +175 °C junction temperature. It meets automotive ESD requirements including ±30 kV contact/air discharge per IEC 61000-4-2, making it appropriate for infotainment USB ports, camera module interfaces, and other in-vehicle electronics. The SMF5V0A-E3-08 is explicitly listed in Vishay's AEC-Q101 qualified product matrix.
What is the capacitance of the SMF5V0A-E3-08 and how does it affect high-speed signal lines?
The SMF5V0A-E3-08 exhibits 1120 pF typical capacitance at 0 V and 1 MHz. While higher than some ultra-low-capacitance TVS diodes, this value is acceptable for USB 2.0 (480 Mbps) and HDMI CEC channels, where signal bandwidth remains sufficient. The SMF5V0A-E3-08's capacitance is verified in Figure 12 of the Vishay datasheet and does not degrade rise time beyond specification limits for these interfaces.
Does the SMF5V0A-E3-08 have polarity marking, and how is it oriented on the PCB?
Yes, the SMF5V0A-E3-08 uses a cathode bar marking on the top surface of the DO-219AB package, visible in the orientation diagram (Fig. "Orientation in Carrier Tape") of the Vishay datasheet. During PCB layout, the cathode must connect to ground or the lower-potential rail; the anode connects to the signal line being protected. Incorrect orientation renders the device ineffective for unidirectional surge suppression.
What is the peak pulse power rating of the SMF5V0A-E3-08 and under which waveform is it specified?
The SMF5V0A-E3-08 is rated for 200 W peak pulse power under a 10/1000 µs double-exponential waveform, as confirmed in the Absolute Maximum Ratings table of the Vishay datasheet. It also supports 1000 W under the shorter 8/20 µs IEC 61000-4-5 surge waveform. These ratings define its ability to absorb transient energy without failure, and the SMF5V0A-E3-08 sustains both waveforms within its thermal limits.
SMF5V0A-E3-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- DO-219AB
- Series:
- eSMP®
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V
- Voltage - Breakdown (Min):
- 6.4V
- Voltage - Clamping (Max) @ Ipp:
- 9.2V
- Current - Peak Pulse (10/1000µs):
- 21.7A
- Power - Peak Pulse:
- 200W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 1120pF @ 1MHz
- Operating Temperature:
- -65°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DO-219AB (SMF)
SMF5V0A-E3-08 FAQ
1.How can I place an order for SMF5V0A-E3-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for SMF5V0A-E3-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SMF5V0A-E3-08 reliable?
The price and inventory of SMF5V0A-E3-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SMF5V0A-E3-08 is usually 5 days.
3.What payment methods are accepted for SMF5V0A-E3-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SMF5V0A-E3-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SMF5V0A-E3-08?
SMF5V0A-E3-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SMF5V0A-E3-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SMF5V0A-E3-08?
For technical support, including SMF5V0A-E3-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SMF5V0A-E3-08 requirements.
6.How does Aetrix verify that SMF5V0A-E3-08 is sourced from the original manufacturer or authorized distributors?
All SMF5V0A-E3-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SMF5V0A-E3-08 meets industry standards.
7.What is the process for return or replacement of SMF5V0A-E3-08?
All SMF5V0A-E3-08 units undergo pre-shipment inspection (PSI). If there is an issue with SMF5V0A-E3-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SMF5V0A-E3-08 part is unused and in its original packaging.
Return procedure for SMF5V0A-E3-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SMF5V0A-E3-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
