My Inquiry
My Account
Infineon Technologies SPP15P10P
- Part No.:
- SPP15P10P
- Manufacturer:
- Infineon Technologies
- Category:
- FETs, MOSFETs
- Package:
- TO-220-3
- Datasheet:
-
SPP15P10P.pdf
- Description:
- MOSFET P-CH 100V 15A TO220-3
- Quantity:
- Payment:
- Shipping:
Inventory:9,977
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SPP15P10P from Infineon Technologies is a P-channel enhancement-mode SIPMOS™ power MOSFET rated for -100 V drain-source voltage, 0.24 Ω maximum RDS(on) at -10 V VGS, and -15 A continuous drain current at TC = 25 °C. It features avalanche rating (230 mJ), dv/dt ruggedness (6 kV/µs), and integrated reverse diode with -15 A continuous forward current - deployed in industrial DC-DC converters, motor control H-bridge high-side switches, and UPS output stages.
For engineers reviewing the SPP15P10P datasheet, SPP15P10P pinout, SPP15P10P application, or SPP15P10P equivalent, key selection criteria include verified -100 V VBR(DSS), temperature-stable RDS(on) up to 175 °C, gate charge profile (Qg = -33.4 nC), reverse recovery performance (trr = 100 ns), and TO-220 package thermal resistance (RthJC = 1.17 K/W).
Technical Context
This device operates as a normally-off P-channel switch requiring negative gate drive relative to source. Its avalanche-rated construction enables robust operation under inductive switching stress, while the integrated body diode supports freewheeling in half-bridge topologies without external diodes.
Dynamic parameters are characterized at -80 V VDD, -15 A ID, and 6 Ω gate resistance: turn-on delay (8.9 ns), rise time (30 ns), turn-off delay (35 ns), and fall time (22 ns). Gate plateau voltage is -5.7 V, confirming stable threshold behavior across temperature.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS Rating | -100 V - supports 80 V nominal bus systems with 25 % safety margin against transients |
| RDS(on) max | 0.24 Ω at VGS = -10 V, ID = -10.6 A - determines conduction loss in high-current DC paths |
| ID continuous | -15 A at TC = 25 °C - defines heatsink sizing baseline for forced-air or natural convection cooling |
| EAS | 230 mJ single-pulse - enables reliable operation in unclamped inductive switching without snubbers |
| Qg | -33.4 nC - sets gate driver power requirement and switching speed trade-off in PWM circuits |
| trr | 100 ns - limits reverse recovery losses and EMI generation during diode commutation |
| RthJC | 1.17 K/W - allows direct junction-to-heatsink thermal modeling for thermal design validation |
Pinout & Package
Package: PG-TO220-3-1 - through-hole, insulated tab, vertical mounting with heatsink interface on drain (pin 2). Thermal performance validated on FR4 PCB with 6 cm² copper area.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Gate | Control terminal; requires -10 V to fully enhance; gate leakage ≤ -100 nA at -20 V |
| Pin 2 | Drain | High-side switching node; electrically connected to metal tab; carries full load current and heat |
| Pin 3 | Source | Reference node for gate drive; tied to system ground or floating rail in high-side configuration |
Key Features
| Feature | Design Value |
|---|---|
| Avalanche energy rating | 230 mJ single-pulse - eliminates need for external clamping in relay or solenoid drive |
| dv/dt ruggedness | 6 kV/µs - prevents false turn-on during fast voltage transients in motor drives |
| Integrated body diode | -15 A continuous, -1.35 V VSD - enables synchronous rectification in buck converters without discrete diode |
| Thermal stability | RDS(on) increases only 0.55 Ω at Tj = 175 °C - maintains predictable conduction loss over full operating range |
| Gate threshold consistency | VGS(th) = -4 to -2.1 V - ensures reliable turn-on margin across production lots and temperature |
Applications
| Industrial Motor Control | Uninterruptible Power Supply (UPS) |
|---|---|
Use Scenario: High-side switch in 48 V brushed DC motor H-bridge for factory automation actuators. IC Role / Device Role / Timing Role: P-channel MOSFET providing bidirectional current control with integrated body diode freewheeling. Use Value: Avalanche rating absorbs inductive kickback during rapid direction reversal; RDS(on) < 0.24 Ω minimizes I²R loss at 12 A peak. | Use Scenario: Output stage switch in online double-conversion UPS delivering clean 230 V AC from battery-backed DC bus. IC Role / Device Role / Timing Role: High-voltage P-channel switch enabling efficient DC-AC inversion with low gate drive complexity. Use Value: -100 V rating accommodates 80 V DC bus + 20 V ripple; Qg = -33.4 nC supports 50 kHz PWM with standard gate drivers. |
| DC-DC Converter | Power Distribution Unit (PDU) |
Use Scenario: Synchronous rectifier in isolated 24 V → 5 V flyback converter for telecom base station management modules. IC Role / Device Role / Timing Role: Low-side synchronous rectifier replacing Schottky diode to improve efficiency at light loads. Use Value: Body diode VSD ≤ -1.35 V and trr = 100 ns reduce conduction and recovery losses versus discrete diodes. | Use Scenario: Hot-swap protection switch in 48 V datacenter PDU managing server rack power sequencing. IC Role / Device Role / Timing Role: Current-limiting high-side switch with controlled turn-on via gate resistor network. Use Value: dv/dt rating of 6 kV/µs prevents latch-up during hot-insertion transients; RthJC = 1.17 K/W enables compact heatsink integration. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel power MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP16PF10 | RDS(on) = 0.28 Ω (higher), EAS = 190 mJ (lower), same TO-220 package | Lower avalanche capability reduces margin in inductive load switching | Acceptable where transient energy is limited and cost sensitivity outweighs ruggedness needs |
| IRF9540NPBF | RDS(on) = 0.20 Ω (lower), no specified dv/dt rating, Qg = -44 nC (higher) | Higher gate charge increases driver loss and slows switching vs. SPP15P10P | Preferred when lowest conduction loss dominates, but requires stronger gate driver and lacks dv/dt immunity |
Compared with STP16PF10 and IRF9540NPBF, SPP15P10P delivers superior dv/dt immunity and balanced gate charge for high-reliability industrial switching, while maintaining competitive RDS(on) and proven avalanche endurance in real-world motor and UPS deployments.
Availability
SPP15P10P is available at Aetrix Electronics and suitable for industrial motor control, uninterruptible power supply (UPS), DC-DC converter, and power distribution unit (PDU) applications requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for SPP15P10P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive, and industrial control ICs and discrete devices.
SPP15P10P belongs to the SIPMOS™ Small-Signal-Transistor product line, engineered for high-reliability power switching in harsh industrial environments with emphasis on avalanche ruggedness and thermal stability.
FAQ
Is SPP15P10P suitable for high-frequency PWM applications above 100 kHz?
No - its gate charge (Qg = -33.4 nC) and switching times (e.g., tr = 30 ns, tf = 22 ns) are optimized for 20–100 kHz operation. At >100 kHz, switching losses increase significantly due to higher required gate drive power and reduced dead-time margin. For >100 kHz, consider lower-Qg alternatives like IPP080N10N.
Can SPP15P10P be used in parallel configurations?
Yes - its positive RDS(on) temperature coefficient (0.55 Ω at 175 °C) enables inherent current sharing. However, layout symmetry, matched gate drive impedance, and individual source resistors are mandatory to prevent thermal runaway. Derate total current by 20 % per additional device beyond two units.
What is the maximum allowable gate-source voltage during transient conditions?
The absolute maximum VGS is ±20 V per datasheet. During transient events (e.g., ESD or coupling), sustained voltage beyond ±15 V risks oxide degradation. Use Zener clamps (e.g., BZX84-C15) between gate and source, and limit series gate resistance to ≤10 Ω to suppress ringing without compromising turn-off speed.
Does the integrated body diode support synchronous rectification in buck converters?
Yes - the body diode has -15 A continuous rating and -1.35 V forward voltage at -15 A, making it viable for synchronous rectification in medium-power buck converters up to 500 W. However, its reverse recovery charge (Qrr = 419 nC) is higher than dedicated Schottky diodes, so operate below 100 kHz and ensure adequate dead-time to avoid shoot-through.
SPP15P10P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- SIPMOS®
- Package/Case:
- TO-220-3
- Packaging:
- Tube
- Product Status:
- Obsolete
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 100 V
- Current - Continuous Drain (Id) @ 25°C:
- 15A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 240mOhm @ 10.6A, 10V
- Vgs(th) (Max) @ Id:
- 2.1V @ 1.54mA
- Gate Charge (Qg) (Max) @ Vgs:
- 50 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 1180 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 128W (Tc)
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- PG-TO220-3
SPP15P10P FAQ
1.How can I place an order for SPP15P10P through Aetrix?
Please submit a Request for Quotation (RFQ) for SPP15P10P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SPP15P10P reliable?
The price and inventory of SPP15P10P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SPP15P10P is usually 5 days.
3.What payment methods are accepted for SPP15P10P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SPP15P10P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SPP15P10P?
SPP15P10P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SPP15P10P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SPP15P10P?
For technical support, including SPP15P10P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SPP15P10P requirements.
6.How does Aetrix verify that SPP15P10P is sourced from the original manufacturer or authorized distributors?
All SPP15P10P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SPP15P10P meets industry standards.
7.What is the process for return or replacement of SPP15P10P?
All SPP15P10P units undergo pre-shipment inspection (PSI). If there is an issue with SPP15P10P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SPP15P10P part is unused and in its original packaging.
Return procedure for SPP15P10P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SPP15P10P Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
