My Inquiry
My Account
Taiwan Semiconductor Corporation SSL33HM6G
- Part No.:
- SSL33HM6G
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- Single Diodes
- Package:
- DO-214AB, SMC
- Datasheet:
-
SSL33HM6G.pdf
- Description:
- DIODE SCHOTTKY 30V 3A DO214AB
- Quantity:
- Payment:
- Shipping:
Inventory:9,131
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SSL33HM6G from Taiwan Semiconductor is a 3A, 30V Schottky barrier surface-mount rectifier in DO-214AB (SMC) package, optimized for high-efficiency switching mode power supplies and DC-DC converters with low forward voltage (VF ≤ 0.41 V at 3 A, 25°C) and high surge capability (IFSM = 100 A). It features guard ring overvoltage protection and RoHS/halogen-free compliance.
For engineers reviewing the SSL33HM6G datasheet, SSL33HM6G pinout, SSL33HM6G application, or SSL33HM6G equivalent, key selection criteria include repetitive peak reverse voltage (VRRM = 30 V), junction temperature range (–55°C to +125°C), thermal resistance (RθJL = 13°C/W), moisture sensitivity level (MSL 1), and cathode-band polarity marking for reliable automated assembly and thermal management in compact power designs.
Technical Context
This Schottky rectifier uses a single-die construction with platinum-silicide or comparable low-barrier metallization to achieve fast recovery (no stored charge) and minimal switching loss. Its 30 V VRRM rating targets mid-voltage DC-DC stages where efficiency and thermal headroom are critical-e.g., 24 V input rails feeding 5 V/3.3 V point-of-load converters.
The device operates across –55°C to +125°C junction temperature, with RθJA = 53°C/W on a 16 mm × 16 mm Cu pad PCB, enabling stable performance in thermally constrained adapters and lighting drivers without forced airflow. Reverse leakage remains ≤200 μA at 25°C and ≤50 mA at 100°C under rated VR.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 30 V - Maximum non-repetitive reverse voltage the device blocks reliably in SMPS flyback or buck output stages |
| IF | 3 A continuous - Rated average forward current at TA = 25°C, defining steady-state conduction capacity |
| VF @ 3A, 25°C | ≤0.41 V - Low conduction loss enabling >92% efficiency in 12–24 V input converters |
| IFSM (8.3 ms) | 100 A - Withstands inrush and transient surges common during AC/DC adapter startup or load dump |
| RθJL | 13 °C/W - Enables direct heat transfer to PCB copper, supporting compact thermal design without heatsinks |
| MSL Level | Level 1 (per J-STD-020) - No floor life limitation; safe for standard SMT reflow without dry-pack or baking |
Pinout & Package
Package: DO-214AB (SMC), surface-mount, molded plastic case with matte tin-plated leads, cathode indicated by band. Weight ≈ 0.210 g.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (unmarked end) | Forward current entry | Connected to lower-potential node (e.g., switch node in buck, secondary winding in flyback) |
| Cathode (banded end) | Forward current exit / reverse blocking terminal | Connected to output rail; polarity marking ensures correct orientation during automated placement |
Key Features
| Feature | Design Value |
|---|---|
| Guard ring structure | Enhances edge termination robustness, preventing premature avalanche breakdown under voltage transients |
| Low VF at high IF | Minimizes I²R losses in high-current paths-critical for thermal margin in sealed adapters |
| J-STD-002 solderability | Ensures reliable reflow wetting on OSP- or ENIG-finished PCBs without flux optimization |
| UL 94V-0 molding compound | Meets flammability safety requirements for Class II power supplies and LED drivers |
Applications
| AC/DC Adapters | LED Constant-Current Drivers |
|---|---|
Use Scenario: Secondary-side rectification in 12–24 V output wall adapters powering IoT gateways and industrial sensors. IC Role / Device Role / Timing Role: Schottky rectifier replacing slower diodes to reduce conduction loss and improve light-load efficiency. Use Value: VF ≤ 0.41 V cuts diode power loss by ~40% vs. standard PN diodes, lowering case temperature by up to 15°C at full load. | Use Scenario: Output rectification in isolated flyback LED drivers for commercial downlights (24–48 V output). IC Role / Device Role / Timing Role: High-reliability freewheeling path during MOSFET off-time, handling pulsed LED currents up to 3 A. Use Value: 100 A IFSM withstands surge currents from capacitor charging transients, extending driver lifetime in cyclic dimming applications. |
| Industrial DC-DC Converters | USB-C Power Delivery Accessories |
Use Scenario: Synchronous rectifier replacement in 24 V input → 5 V/3.3 V buck converters for PLC I/O modules. IC Role / Device Role / Timing Role: Low-loss freewheeling diode in non-synchronous topologies where controller lacks SR drive capability. Use Value: RθJL = 13°C/W allows direct PCB copper conduction, eliminating need for thermal vias in space-constrained 2-layer boards. | Use Scenario: Output rectification in compact 60 W USB-C PD chargers with dual-port 20 V/3 A capability. IC Role / Device Role / Timing Role: Fast-switching, low-VF rectifier in folded PCB layouts where thermal density exceeds 0.5 W/cm². Use Value: MSL Level 1 enables direct use from tape-and-reel without dry-pack handling-reducing manufacturing overhead in high-volume OEM lines. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay SS33HE3/57T | VRRM = 30 V, IF = 3 A, VF ≈ 0.45 V @ 3 A - slightly higher forward drop; same DO-214AB package | Higher VF increases conduction loss in thermally limited USB-C adapters | Preferred where Vishay supply chain alignment or qualification history is required |
| ON Semiconductor SB330 | VRRM = 30 V, IF = 3 A, VF ≈ 0.49 V @ 3 A; RθJA ≈ 60°C/W - higher thermal resistance | Requires larger copper area or airflow to match SSL33HM6G's thermal performance | Acceptable for cost-sensitive, non-thermally constrained lighting modules |
Compared with SS33HE3/57T and SB330, SSL33HM6G delivers the lowest VF (≤0.41 V) and best thermal resistance (RθJL = 13°C/W), making it optimal for high-density, convection-cooled power stages where efficiency and board area are co-constrained.
Availability
SSL33HM6G is available at Aetrix Electronics and suitable for AC/DC adapters, LED drivers, industrial DC-DC converters, and USB-C power delivery accessories requiring stable component supply, MSL Level 1 handling, and consistent Schottky performance across production batches.
Supply support for SSL33HM6G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Company (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, specializing in power rectifiers, TVS diodes, and MOSFETs for industrial and consumer power systems.
The SSL32–SSL34 family-including SSL33HM6G-is designed specifically for high-efficiency, surface-mount rectification in space-constrained switching power supplies, emphasizing low VF, robust surge tolerance, and JEDEC-compliant packaging for automated manufacturing.
FAQ
What is the maximum repetitive peak reverse voltage (VRRM) of SSL33HM6G?
The SSL33HM6G has a VRRM of 30 V, meaning it reliably blocks up to 30 V of reverse voltage in repetitive operation. This rating is validated per JEDEC test conditions and defines its safe operating range in buck converter outputs or flyback secondary circuits where reverse voltage transients may reach 25–28 V. Exceeding 30 V risks avalanche breakdown and permanent damage to the SSL33HM6G.
Does SSL33HM6G require baking before SMT reflow due to moisture sensitivity?
No, SSL33HM6G does not require baking before reflow. It is rated MSL Level 1 per J-STD-020, indicating unlimited floor life at ≤30°C/60% RH. The device can be placed directly from tape-and-reel into standard lead-free reflow profiles without dry-pack storage or pre-bake cycles-reducing process complexity and cost in high-volume SSL33HM6G assembly lines.
What is the forward voltage (VF) specification for SSL33HM6G at 3 A and 100°C junction temperature?
The SSL33HM6G datasheet specifies VF only at TJ = 25°C (≤0.41 V at IF = 3 A); no typ/max VF value is provided at 100°C. However, typical Schottky VF decreases ~2 mV/°C, so VF at 100°C is estimated ~0.26–0.29 V. For design-critical thermal analysis, engineers should verify actual VF using the SSL33HM6G's Fig.4 (Forward Characteristics) curve at elevated temperature rather than extrapolating.
Is SSL33HM6G pin-compatible with SSL32HM6G or SSL34HM6G?
Yes, SSL33HM6G shares identical DO-214AB (SMC) package dimensions, pinout, and thermal pad layout with SSL32HM6G (20 V) and SSL34HM6G (40 V). All three use the same anode/cathode terminal configuration and marking convention (SL33 cathode band), enabling direct PCB footprint reuse across the SSL32–SSL34 family when adjusting VRRM for different input/output voltage margins.
What is the junction-to-lead thermal resistance (RθJL) of SSL33HM6G, and why does it matter?
The SSL33HM6G has RθJL = 13°C/W, measured from junction to lead under JEDEC-standard test conditions. This low value indicates efficient heat transfer from the silicon die directly into the PCB copper via the leads-enabling passive cooling in adapters and LED drivers without thermal vias or heatsinks. Designers use RθJL to calculate junction temperature rise above PCB temperature, ensuring SSL33HM6G stays within its 125°C TJ max limit.
SSL33HM6G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Series:
- -
- Package/Case:
- DO-214AB, SMC
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 30 V
- Current - Average Rectified (Io):
- 3A
- Voltage - Forward (Vf) (Max) @ If:
- 410 mV @ 3 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 200 µA @ 30 V
- Capacitance @ Vr, F:
- -
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DO-214AB (SMC)
- Operating Temperature - Junction:
- -55°C ~ 125°C
SSL33HM6G FAQ
1.How can I place an order for SSL33HM6G through Aetrix?
Please submit a Request for Quotation (RFQ) for SSL33HM6G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SSL33HM6G reliable?
The price and inventory of SSL33HM6G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SSL33HM6G is usually 5 days.
3.What payment methods are accepted for SSL33HM6G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SSL33HM6G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SSL33HM6G?
SSL33HM6G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SSL33HM6G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SSL33HM6G?
For technical support, including SSL33HM6G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SSL33HM6G requirements.
6.How does Aetrix verify that SSL33HM6G is sourced from the original manufacturer or authorized distributors?
All SSL33HM6G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SSL33HM6G meets industry standards.
7.What is the process for return or replacement of SSL33HM6G?
All SSL33HM6G units undergo pre-shipment inspection (PSI). If there is an issue with SSL33HM6G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SSL33HM6G part is unused and in its original packaging.
Return procedure for SSL33HM6G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SSL33HM6G Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
