STMicroelectronics STGIB30M60TS-L

Overview

STGIB30M60TS-L from STMicroelectronics is a 35 A, 600 V SLLIMM-2nd series intelligent power module (IPM) integrating a 3-phase IGBT inverter bridge, dual gate drivers (HS/LS), freewheeling diodes, temperature sensing, and fault protection circuitry. It delivers short-circuit ruggedness (8 µs withstand time), 1600 Vrms isolation, and TTL/CMOS-compatible 3.3 V/5 V inputs for motor drive inverters operating up to 20 kHz.

For engineers reviewing the STGIB30M60TS-L datasheet, STGIB30M60TS-L pinout, STGIB30M60TS-L application, or STGIB30M60TS-L equivalent, key selection criteria include bootstrap-enabled high-side drive, smart shutdown response (<24 µs overcurrent disable), integrated NTC thermistor (85 kΩ @ 25 °C), and isolated SD/OD fault signaling with comparator input.

Technical Context

This IPM implements a fully isolated, compact 3-phase inverter stage using trench gate field-stop (TFS) IGBTs with soft-recovery diodes and internal bootstrap diodes. Its control architecture features separate high-side (VCCH) and low-side (VCCL) 13.5–18 V supplies, hysteresis-equipped logic inputs, and dual fault detection paths: UVLO on VCCH/VCCL and overcurrent via external shunt + internal comparator feeding SD/OD.

The smart shutdown function provides immediate gate turn-off upon comparator trigger-decoupling protection latency from external RC timing-while maintaining open-drain SD output latching until VSD falls below 0.75 V and timeout elapses. Temperature monitoring is supported via analog TSO voltage output (1.16 V @ 25 °C) and discrete NTC terminals (T1/T2, R25 = 85 kΩ).

Key Specifications

Pinout & Package

STGIB30M60TS-L uses the SDIP2B-26L type L1 package-a 26-pin, fully isolated, surface-mount molded module with 38.0 mm × 24.0 mm footprint, 1.22 mm height, and creepage/clearance compliant with UL 1557 (E81734) and UL 1434 (CA 4).

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar 3-phase inverter IPM applications.

Compared with FGB3060AP and FSBB30CH60C, STGIB30M60TS-L uniquely combines smart shutdown (<24 µs OC response), dual thermal sensing (TSO + NTC), and 1600 Vrms isolation in a 26-pin SDIP2B package-making it optimal for safety-critical, thermally constrained consumer motor drives.

Availability

STGIB30M60TS-L is available at Aetrix Electronics and suitable for washing machine drives, dryer motor controls, and industrial fan inverters requiring stable component supply, long-lifecycle support, and UL-recognized isolation performance.

Supply support for STGIB30M60TS-L includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power devices, sensors, and analog ICs for automotive, industrial, and consumer markets.

STGIB30M60TS-L belongs to the SLLIMM-2nd series intelligent power modules-engineered specifically for compact, high-efficiency 3-phase AC motor drives in white goods and industrial equipment, emphasizing integration, protection, and safety certification.

FAQ

What is the maximum recommended DC bus voltage for STGIB30M60TS-L?

The absolute maximum DC supply voltage (VPN) between P and NU/NV/NW is 450 V, with a 500 V surge rating. For reliable long-term operation, ST recommends limiting the DC bus to ≤400 V under normal conditions, as specified in the Recommended Operating Conditions table (Table 13). Exceeding 450 V risks permanent damage to IGBTs and internal protection circuitry.

How does the smart shutdown function differ from conventional fault handling in IPMs?

Unlike conventional IPMs that rely solely on external RC networks to set fault response time, STGIB30M60TS-L's smart shutdown triggers immediate gate turn-off (<24 µs) upon comparator activation at pin CIN-decoupling protection latency from external timing components. The SD/OD pin still latches the fault state, but gate disable occurs independently, enabling faster motor protection during overcurrent events.

Can STGIB30M60TS-L operate with a 3.3 V microcontroller without level shifting?

Yes. All logic inputs (HINx, LINx, SD) accept 3.3 V TTL/CMOS signals directly, with VIH(min) = 2.0 V and VIL(max) = 0.8 V, and built-in 100 kΩ pull-down resistors. No external level shifters are required, simplifying interface design and reducing component count in space-constrained applications like appliance control boards.

What thermal monitoring options does STGIB30M60TS-L provide, and how are they used together?

It provides two independent thermal monitoring paths: an analog TSO pin (0.97–1.35 V output linear with junction temperature) and dual NTC terminals (T1/T2) for an external 85 kΩ thermistor. TSO enables fast, localized die temperature feedback for real-time PWM derating, while the NTC supports system-level cabinet or heatsink monitoring-allowing layered thermal management strategies in safety-critical designs.