STMicroelectronics STGIPN3H60-E

Overview

STGIPN3H60-E from STMicroelectronics is a SLLIMM™-nano intelligent power module integrating a 3 A / 600 V 3-phase IGBT inverter bridge with gate drivers, freewheeling diodes, op amp, comparator, and smart shutdown logic - designed for compact AC motor drives in built-in appliances. It delivers V_CE(sat) ≤ 2.6 V at 1 A, 150 °C junction operation, and ±2 kV HBM ESD rating, targeting refrigerator compressors and HVAC fan inverters.

For engineers reviewing the STGIPN3H60-E datasheet, STGIPN3H60-E pinout, STGIPN3H60-E application, or STGIPN3H60-E equivalent, key selection criteria include its NDIP-26L package thermal resistance (R_thJA = 50 °C/W), integrated bootstrap diodes, 180 ns interlocking dead time, and op amp-based current sensing architecture - all critical for low-EMI, space-constrained inverter designs.

Technical Context

The STGIPN3H60-E implements three half-bridge HVICs driving six IGBTs with monolithic freewheeling diodes, enabling direct MCU interface without optocouplers. Its control logic supports active-high HIN and active-low LIN inputs with built-in pull-down (85 kΩ) and pull-up (720 kΩ) resistors, plus interlocking and programmable dead time (1.5 μs blanking).

It integrates a rail-to-rail op amp (GBWP = 8–12 MHz, SR = 2.5–3.8 V/μs) and comparator (V_ref = 0.54 V typ., t_{d_comp} = 90–130 ns) for fast overcurrent protection, coupled with a dedicated open-drain SD/OD pin that triggers immediate gate shutdown upon fault detection - bypassing external RC timing dependencies.

Key Specifications

Pinout & Package

STGIPN3H60-E uses the NDIP-26L (Type C) surface-mount package - a 26-pin, single-row, insulated dual in-line plastic package optimized for thermal dissipation and PCB layout simplicity in embedded motor modules. The package features internal insulation and isolated power/ground planes to support high-voltage isolation requirements.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar 3-phase IGBT inverter module applications.

Compared with FNA21012T and FSB50825, STGIPN3H60-E uniquely combines op amp + comparator + smart shutdown in NDIP-26L, enabling full protection and sensing in <10 mm² footprint - ideal for space-constrained, safety-certified consumer appliances.

Availability

STGIPN3H60-E is available at Aetrix Electronics and suitable for refrigerator compressor drives, HVAC fan inverters, dishwasher drain pumps, and recirculation pump control requiring stable component supply through extended product lifecycles.

Supply support for STGIPN3H60-E includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, specializing in power management, microcontrollers, and intelligent power solutions for industrial and consumer markets.

The SLLIMM™-nano product line delivers highly integrated, thermally optimized IPMs for sub-1 kW motor drives - engineered specifically for space-constrained, high-reliability white goods and HVAC applications.

FAQ

What is the maximum recommended DC bus voltage for STGIPN3H60-E?

The datasheet specifies a recommended operating voltage range of 300–500 V between P and NU/NV/NW terminals. While the absolute maximum V_CES is 600 V, sustained operation above 500 V increases thermal stress and reduces reliability margin - especially at elevated case temperatures (>100 °C). Designers should maintain ≥20% derating for long-term field operation.

Can the integrated op amp be used for voltage sensing instead of current sensing?

Yes - the op amp is fully uncommitted and supports both inverting and non-inverting configurations. Its input common-mode range (0 V to V_CC) and rail-to-rail output allow direct DC bus voltage scaling (e.g., using resistive divider into OP+), provided input voltages stay within −0.3 V to V_CC + 0.3 V and total input bias current (≤200 nA) is accounted for in divider design.

How does the smart shutdown function interact with the SD/OD pin during normal operation?

During normal operation, SD/OD operates as an open-drain output pulled high externally (typically to 3.3 V or 5 V). When a fault occurs (e.g., overcurrent detected at CIN), the internal logic pulls SD/OD low immediately and holds it until the SD input voltage falls below its turn-off threshold (~10.5 V). This provides a latched fault signal visible to the host controller without external debouncing.

Is external bootstrap capacitor mandatory for each phase despite the internal diode?

Yes - the internal bootstrap diode only replaces the external diode; it does not eliminate the need for external bootstrap capacitors (typically 0.1–0.22 μF ceramic) at each VBOOT pin. These capacitors must be placed within 5 mm of the module pins to maintain stable high-side gate voltage during PWM switching and prevent UVLO triggering.