STMicroelectronics STGIPS40W60L1

Overview

STGIPS40W60L1 from STMicroelectronics is a single-phase SLLIMM™ intelligent power module integrating 40 A/600 V ultra-fast IGBTs, freewheeling diodes, gate drivers, fault protection comparators, op-amp current sensing, and NTC thermistor terminals in an SDIP-22L package. It delivers high-frequency motor drive capability with integrated dead time control, smart shutdown, and 2500 Vrms isolation for compressor-based power factor correction systems.

For engineers reviewing the STGIPS40W60L1 datasheet, STGIPS40W60L1 pinout, STGIPS40W60L1 application, or STGIPS40W60L1 equivalent, key selection criteria include its 2.0 V typical V_CE(sat) at 30 A, 410 ns turn-on time, 1.25 °C/W IGBT junction-to-case thermal resistance, integrated 4.7 kΩ NTC, and dual P/N DC bus terminals enabling direct half-bridge implementation without external bootstrap diodes.

Technical Context

The STGIPS40W60L1 implements a fully integrated half-bridge topology with independent high-side (HIN) and low-side (LIN) CMOS/TTL-compatible inputs, internal bootstrap diode, and programmable dead time via external resistor on pin DT. Its control IC provides undervoltage lockout for both VCC and VBOOT rails, with hysteresis thresholds of 1.5 V (VCC) and 1.5 V (VBS).

Protection architecture includes a dedicated comparator (CIN input) with 90–130 ns propagation delay feeding a smart shutdown logic that directly disables HVG/LVG outputs within 50–200 ns-bypassing external RC timing networks. The integrated op amp (OP+, OP−, OPOUT) supports precision shunt-based phase current sensing with 6 mV input offset voltage and 8–12 MHz gain-bandwidth product.

Key Specifications

Pinout & Package

SDIP-22L surface-mount package with DBC substrate, 22-pin layout, and isolated baseplate. Features dual P and N DC bus terminals (pins 21/22 and 17/18), dual PHASE outputs (pins 19/20), and dedicated NTC (T1/T2), op amp (OP+/OP−/OPOUT), and comparator (CIN) signal terminals.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar single-phase IPM applications.

Compared with FDPF5N50UN and FSB50450, the STGIPS40W60L1 uniquely integrates 40 A/600 V IGBTs, programmable dead time, UL-recognized NTC, and op-amp current sensing - enabling complete single-phase PFC or inverter designs in one SDIP-22L package without external protection or sensing components.

Availability

STGIPS40W60L1 is available at Aetrix Electronics and suitable for compressor PFC stages, single-phase inverter drives, industrial blower controls, and appliance motor modules requiring stable component supply across multi-year production cycles.

Supply support for STGIPS40W60L1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power devices, sensors, and analog ICs for industrial, automotive, and consumer markets.

The SLLIMM™ IPM product line targets high-frequency, space-constrained motor drives and PFC applications - emphasizing integration density, thermal performance, and embedded protection to reduce system-level design effort.

FAQ

What is the maximum recommended PWM frequency for STGIPS40W60L1?

The datasheet specifies 20 kHz as the recommended maximum PWM frequency under full-load conditions (T_C ≤ 100°C). This limit ensures safe operation given the module's 410 ns turn-on time, 320 ns turn-off time, and thermal resistance. At higher frequencies, switching losses increase significantly, requiring enhanced heatsinking or derating to maintain junction temperature below 150°C.

How does the smart shutdown function differ from conventional shutdown inputs?

Unlike standard shutdown pins that require external RC timing networks to set disable duration, STGIPS40W60L1's smart shutdown uses a dedicated comparator-to-driver signal path. When CIN exceeds the internal reference, HVG/LVG outputs disable within 50–200 ns - independent of SD/OD pin voltage transition. This eliminates timing uncertainty and ensures immediate fault containment without external passive components.

Can STGIPS40W60L1 be used without an external bootstrap capacitor?

No. Although the module includes an internal bootstrap diode, an external ceramic bootstrap capacitor (typically 0.1–0.22 µF, X7R, 25 V) must be placed between VBOOT and PHASE pins. This capacitor supplies gate drive energy during high-side conduction and must be located within 5 mm of the pins to minimize loop inductance and prevent voltage droop or oscillation.

What is the purpose of the dual P and dual N terminals?

The dual P (pins 21, 22) and dual N (pins 17, 18) terminals reduce current path inductance and improve thermal spreading across the DBC substrate. Each pair carries half the total DC bus current, lowering resistive loss and enabling symmetrical PCB layout - critical for maintaining balanced switching behavior and minimizing EMI in high-di/dt applications like PFC converters.