My Inquiry
My Account
STMicroelectronics STPS240H100TV1Y
- Part No.:
- STPS240H100TV1Y
- Manufacturer:
- STMicroelectronics
- Category:
- Diode Arrays
- Package:
- SOT-227-4, miniBLOC
- Datasheet:
-
STPS240H100TV1Y.pdf
- Description:
- DIODE MOD SCHOT 100V 120A ISOTOP
- Quantity:
- Payment:
- Shipping:
Inventory:11
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STPS240H100TV1Y from STMicroelectronics is an AEC-Q101-qualified automotive Schottky diode in ISOTOP package, rated for 100 V reverse voltage and 2 × 120 A average forward current per diode at TC = 140 °C, with typical VF of 0.610 V at 120 A and 150 °C, designed for high-frequency DC/DC converters in hybrid/electric vehicles and on-board chargers.
For engineers reviewing the STPS240H100TV1Y datasheet, STPS240H100TV1Y pinout, STPS240H100TV1Y application, or STPS240H100TV1Y equivalent, key selection criteria include junction-to-case thermal resistance (0.12 °C/W total), avalanche rating (9300 W peak), insulated 2500 VRMS isolation, and surge capability (1150 A non-repetitive).
Technical Context
This dual-diode Schottky rectifier integrates two independent 100 V, 120 A channels in a single insulated ISOTOP package, enabling phase-shift and LLC resonant topologies without external isolation. Its low CJ0 and negligible switching losses stem from Schottky barrier construction, supporting >100 kHz operation.
Thermal management is enhanced by ultra-low Rth(j-c) of 0.12 °C/W (total device), validated under 140 °C case temperature, and supported by UL1557-compliant 2.5 kV insulation - critical for OBC secondary-side rectification where creepage/clearance and transient robustness are mandatory.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 100 V - maximum repetitive reverse blocking voltage per diode, suitable for 48–96 V bus systems |
| IF(AV) | 2 × 120 A - continuous average forward current per diode at TC = 140 °C, enabling 240 A total device output |
| VF (typ.) | 0.610 V at 120 A, 150 °C - conduction loss of ~73 W per diode, enabling high-efficiency rectification |
| Rth(j-c) | 0.12 °C/W total - enables 240 A operation with <30 °C junction rise above heatsink at steady state |
| IFSM | 1150 A (10 ms sine) - withstands short-circuit transients in vehicle power systems |
| Insulation | 2500 VRMS - meets reinforced insulation requirements for EV battery-connected DC/DC stages |
| Tj max | +175 °C - supports operation in engine bay or powertrain enclosures without derating |
Pinout & Package
The STPS240H100TV1Y uses the ISOTOP package - a 4-terminal, insulated metal-base power package with M4 mounting screws, epoxy rated UL94 V0, and 2.5 kV isolation between terminals and baseplate. Cooling is exclusively via conduction through the baseplate to an external heatsink.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 / K1 | Anode 1 / Cathode 1 | First independent Schottky diode channel; A1 connects to input, K1 to output node |
| A2 / K2 | Anode 2 / Cathode 2 | Second independent Schottky diode channel; electrically isolated from first channel and baseplate |
| Baseplate | Insulated thermal interface | Non-conductive mounting surface rated 2500 VRMS; provides mechanical attachment and thermal path only |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualification | Validated for automotive powertrain use including temperature cycling, HTRB, and ESD testing |
| Avalanche energy rating | 9300 W peak (10 µs pulse) - protects against inductive turn-off spikes in LLC transformers |
| Low thermal resistance | 0.12 °C/W total junction-to-case - reduces heatsink size by >40% vs. comparable TO-247 devices |
| High surge capability | 1150 A non-repetitive forward surge - sustains load dump or short-circuit events in OBC startup |
| ECOPACK2 compliance | Halogen-free, RoHS-compliant materials with lead-free termination finish |
Applications
| On-Board Charger (OBC) Secondary Rectification | Hybrid/EV Traction Inverter Auxiliary Supply |
|---|---|
Use Scenario: High-current 400 V–800 V DC/DC stage converting battery voltage to 12 V/48 V auxiliary rail. IC Role / Device Role / Timing Role: Dual-channel synchronous rectifier replacing MOSFETs in center-tapped or full-wave configurations. Use Value: Eliminates gate drive complexity and body diode conduction loss while maintaining 0.61 V VF at 120 A, reducing heat sink mass by 35%. | Use Scenario: Isolated auxiliary power supply powering gate drivers and MCU in traction inverter modules. IC Role / Device Role / Timing Role: Primary rectifier in flyback or forward converter secondary side, referenced to floating ground. Use Value: 2500 VRMS insulation enables direct connection to high-side gate driver circuits without additional isolation barriers. |
| Phase-Shifted Full-Bridge DC/DC Converter | LLC Resonant Converter Output Stage |
Use Scenario: High-efficiency bidirectional DC/DC in vehicle-to-grid (V2G) interfaces operating at 100–300 kHz. IC Role / Device Role / Timing Role: Center-tapped rectifier with interleaved dual diodes handling 240 A combined output. Use Value: Negligible reverse recovery eliminates shoot-through risk during ZVS transitions, improving efficiency by 1.2% at 200 kHz. | Use Scenario: High-density 3.3 kW LLC transformer secondary in fast-charging stations. IC Role / Device Role / Timing Role: Low-CJ0 Schottky rectifier minimizing capacitive switching loss at resonance frequency. Use Value: CJ0 < 100 nF at 30 V enables stable zero-voltage switching up to 500 kHz without snubbers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-current automotive Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IXYS DSSK100-015A | 100 V, 2 × 100 A; TO-264 package; no integrated insulation; Rth(j-c) = 0.22 °C/W | Requires external isolation barrier and larger heatsink; not AEC-Q101 qualified | Select when cost sensitivity outweighs insulation and thermal performance needs |
| Vishay VS-240MT100 | 100 V, 240 A single-diode; TO-247AC package; Rth(j-c) = 0.15 °C/W; no isolation | Lacks dual-channel independence and 2500 VRMS insulation; unsuitable for floating secondary rails | Select only for non-isolated, single-rail 240 A applications with ample heatsink volume |
Compared with DSSK100-015A and VS-240MT100, the STPS240H100TV1Y uniquely delivers dual-channel isolation, AEC-Q101 compliance, and lowest thermal resistance - making it the sole choice for space-constrained, safety-critical EV auxiliary power designs requiring reinforced insulation.
Availability
STPS240H100TV1Y is available at Aetrix Electronics and suitable for on-board chargers, traction inverter auxiliary supplies, and phase-shifted DC/DC converters requiring stable component supply across automotive production lifecycles.
Supply support for STPS240H100TV1Y includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power devices, sensors, and analog ICs for automotive, industrial, and consumer markets.
The STPS series targets high-reliability automotive power conversion, with the STPS240H100TV1Y specifically engineered for insulated, high-current Schottky rectification in harsh thermal and electrical environments.
FAQ
What is the maximum allowable case temperature for continuous operation?
The STPS240H100TV1Y supports continuous operation with case temperature up to 140 °C per diode, delivering 120 A average forward current per channel. Exceeding this requires derating per Figure 1 in DS13247; junction temperature must remain ≤175 °C under all conditions.
Does the ISOTOP package require thermal compound between baseplate and heatsink?
Yes - STMicroelectronics specifies use of thermally conductive grease or phase-change material between the ISOTOP baseplate and heatsink to maintain Rth(j-c) ≤0.12 °C/W. Dry mounting increases thermal resistance by ≥40% and risks premature thermal failure.
Can STPS240H100TV1Y be used in non-automotive industrial DC/DC converters?
Yes - its AEC-Q101 qualification, 175 °C junction rating, and 2500 VRMS insulation make it suitable for industrial UPS, solar inverters, and railway power supplies where reliability and isolation exceed standard commercial-grade diodes.
How is the 240 A rating distributed across the two diodes?
The 240 A rating is the total device current capacity: each of the two independent diodes handles up to 120 A average forward current at TC = 140 °C. They share the same baseplate but have fully isolated anode/cathode terminals - enabling dual-rail or interleaved topologies.
STPS240H100TV1Y Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- SOT-227-4, miniBLOC
- Packaging:
- Tube
- Product Status:
- Active
- Diode Configuration:
- 2 Independent
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 100 V
- Current - Average Rectified (Io) (per Diode):
- 120A
- Voltage - Forward (Vf) (Max) @ If:
- 825 mV @ 120 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 90 µA @ 100 V
- Operating Temperature - Junction:
- -40°C ~ 175°C
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Chassis Mount
- Supplier Device Package:
- ISOTOP
STPS240H100TV1Y FAQ
1.How can I place an order for STPS240H100TV1Y through Aetrix?
Please submit a Request for Quotation (RFQ) for STPS240H100TV1Y on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STPS240H100TV1Y reliable?
The price and inventory of STPS240H100TV1Y are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STPS240H100TV1Y is usually 5 days.
3.What payment methods are accepted for STPS240H100TV1Y?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STPS240H100TV1Y transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STPS240H100TV1Y?
STPS240H100TV1Y orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STPS240H100TV1Y order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STPS240H100TV1Y?
For technical support, including STPS240H100TV1Y datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STPS240H100TV1Y requirements.
6.How does Aetrix verify that STPS240H100TV1Y is sourced from the original manufacturer or authorized distributors?
All STPS240H100TV1Y products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STPS240H100TV1Y meets industry standards.
7.What is the process for return or replacement of STPS240H100TV1Y?
All STPS240H100TV1Y units undergo pre-shipment inspection (PSI). If there is an issue with STPS240H100TV1Y, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STPS240H100TV1Y part is unused and in its original packaging.
Return procedure for STPS240H100TV1Y:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STPS240H100TV1Y Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
