My Inquiry
My Account
STMicroelectronics STPS3030CG-TR
- Part No.:
- STPS3030CG-TR
- Manufacturer:
- STMicroelectronics
- Category:
- Diode Arrays
- Package:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Datasheet:
-
STPS3030CG-TR.pdf
- Description:
- DIODE ARRAY SCHOTT 30V 15A D2PAK
- Quantity:
- Payment:
- Shipping:
Inventory:8,775
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STPS3030CG-TR from STMicroelectronics is a dual low-drop Schottky rectifier in D2PAK (TO-263) package, rated for 30 V repetitive peak reverse voltage and 2 × 15 A average forward current per diode at Tc = 135 °C, with typical forward voltage drop of 0.44 V at 15 A and 25 °C - optimized for high-efficiency, high-frequency DC/DC converters and switch-mode power supplies.
For engineers reviewing the STPS3030CG-TR datasheet, STPS3030CG-TR pinout, STPS3030CG-TR application, or STPS3030CG-TR equivalent, key selection criteria include conduction loss modeling (P = 0.26 × IF(AV) + 0.0107 × IF²(RMS)), thermal resistance (Rth(j–c) = 1.2 °C/W per diode), avalanche capability (4100 W at tp = 1 µs), and D2PAK mounting torque (0.55 Nm recommended).
Technical Context
This dual Schottky rectifier integrates two independent anode-cathode junctions in a single D2PAK thermally enhanced surface-mount package, enabling shared heatsinking while maintaining electrical isolation between channels. Its negligible switching losses and extremely fast recovery eliminate snubber requirements in high-frequency topologies up to several hundred kHz.
The device features specified avalanche capability (PARM = 4100 W, tp = 1 µs), low thermal resistance (Rth(j–c) = 1.2 °C/W per diode), and stable reverse leakage (<1 mA at VR = 30 V, Tj = 125 °C), supporting robust operation in free-wheeling, polarity protection, and low-voltage DC inverters where thermal management and reliability under transient overload are critical.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 30 V - maximum repetitive reverse blocking voltage per diode; defines safe operating range in buck, flyback, or synchronous rectification circuits |
| IF(AV) per diode | 15 A at Tc = 135 °C - continuous DC current handling per channel with adequate heatsinking |
| VF(max) | 0.49 V at IF = 15 A, Tj = 25 °C - directly determines conduction loss and system efficiency at nominal load |
| Rth(j–c) | 1.2 °C/W per diode - enables thermal design using case temperature as proxy for junction temperature |
| IFSM | 250 A (tp = 10 ms, sinusoidal) - supports short-term surge tolerance during startup or fault conditions |
| PARM | 4100 W at tp = 1 µs - quantifies single-pulse avalanche energy handling for transient overvoltage robustness |
| dV/dt | 10,000 V/µs - ensures stable operation without spurious turn-on in fast-switching converter nodes |
Pinout & Package
STPS3030CG-TR uses a 3-pin D2PAK (TO-263) package with exposed metal tab serving as common cathode connection. The package provides low thermal resistance and is designed for surface-mount reflow assembly with mechanical anchoring via screw or clamp (recommended torque: 0.55 Nm).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Anode 1) | Anode of first Schottky diode | Input node for first channel; requires PCB trace sizing for 15 A continuous current |
| Pin 2 (Anode 2) | Anode of second Schottky diode | Independent input node for second channel; electrically isolated from Pin 1 |
| Tab (Cathode) | Common cathode for both diodes | Thermally and electrically connected to PCB copper pour; must be soldered for thermal performance and circuit return path |
Key Features
| Feature | Design Value |
|---|---|
| Low forward voltage drop | VF = 0.44 V typ. @ 15 A, 25 °C - reduces conduction loss by ~25% vs. comparable 45 V Schottkys |
| Dual-diode integration | Two independent 15 A Schottky junctions in one D2PAK - saves board space and simplifies layout in dual-rail or interleaved converters |
| Avalanche-rated operation | 4100 W single-pulse avalanche power - eliminates need for external clamping in inductive switching applications |
| Thermal resistance | Rth(j–c) = 1.2 °C/W per diode - allows direct junction temperature estimation from measured case temperature |
| ECOPACK® compliance | Lead-free second-level interconnect, JEDEC JESD97 marked - meets RoHS and industrial environmental requirements |
Applications
| Server VRM Output Rectification | Industrial DC/DC Converter Secondary Side |
|---|---|
Use Scenario: High-current, low-voltage output stage of multiphase buck converters supplying CPU/GPU core power in 1U servers. IC Role / Device Role / Timing Role: Dual-channel synchronous rectifier replacement; each anode handles one phase's output current, cathode tied to common output rail. Use Value: 0.44 V VF minimizes I²R loss at 15 A/channel, improving full-load efficiency by ≥1.2% versus 0.55 V alternatives; D2PAK thermal interface sustains 135 °C case temperature. | Use Scenario: Isolated 12 V → 3.3 V/5 V DC/DC module in programmable logic controller (PLC) power supply. IC Role / Device Role / Timing Role: Secondary-side dual-output rectifier feeding independent 3.3 V and 5 V LDO pre-regulators. Use Value: Independent anodes enable separate filtering per rail; 250 A IFSM withstands transformer reset spikes without derating; Rth(j–c) = 1.2 °C/W supports convection-cooled design. |
| Telecom AC/DC Front-End Clamp | Automotive Body Control Module Polarity Protection |
Use Scenario: Input-stage reverse-polarity and surge clamp in 48 V telecom rectifier modules subjected to lightning-induced transients. IC Role / Device Role / Timing Role: Low-VF freewheeling path during MOSFET dead-time and avalanche energy sink during line surges. Use Value: 4100 W PARM rating absorbs 1 µs 100 V/100 A transients without failure; dV/dt = 10,000 V/µs prevents false triggering during fast ESD events. | Use Scenario: Reverse-battery protection at 12 V input of BCM controlling door locks, lighting, and sensors. IC Role / Device Role / Timing Role: Cathode-connected to battery+, anodes to downstream loads - blocks reverse current while conducting forward at <0.49 V drop. Use Value: 0.49 V max VF at 15 A limits power dissipation to <7.4 W during cranking; Tj(max) = 150 °C ensures operation at under-hood ambient up to 105 °C. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual Schottky rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Vishay VS-30CPQ030 | Same VRRM (30 V), higher IF(AV) = 30 A per diode, VF = 0.47 V @ 15 A, Rth(j–c) = 1.0 °C/W | Better thermal performance but larger TO-247 package; requires different footprint and mounting | Select when higher current headroom or lower thermal resistance is prioritized over D2PAK compatibility |
| ON Semiconductor MBR3030CT | Same TO-220AB/D2PAK variants, VF = 0.55 V @ 15 A, Rth(j–c) = 1.5 °C/W, no avalanche rating | Lacks specified avalanche capability; less efficient conduction; higher thermal resistance | Acceptable only in cost-sensitive, non-safety-critical applications where surge immunity is externally managed |
Compared with VS-30CPQ030 and MBR3030CT, STPS3030CG-TR delivers superior balance of low VF (0.44 V), verified avalanche robustness (4100 W), and D2PAK mountability - making it optimal for space-constrained, high-reliability DC/DC and industrial power designs where thermal and transient margins are tightly coupled.
Availability
STPS3030CG-TR is available at Aetrix Electronics and suitable for server VRMs, industrial DC/DC converters, telecom front-end clamps, and automotive body control modules requiring stable component supply across multi-year production cycles.
Supply support for STPS3030CG-TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, microcontroller, power, and sensor solutions for industrial, automotive, and consumer markets.
STPS3030CG-TR belongs to ST's Power Schottky Rectifier product line, engineered specifically for high-efficiency, high-frequency power conversion in space-constrained applications where low VF, thermal performance, and transient robustness are co-critical.
FAQ
What is the maximum junction temperature and how is it enforced?
The absolute maximum junction temperature (Tj) for STPS3030CG-TR is 150 °C, validated under thermal runaway avoidance conditions with proper heatsinking. This limit is enforced by design through low Rth(j–c) = 1.2 °C/W per diode and is confirmed in the datasheet's absolute ratings table (Tj max = 150 °C). Operation beyond this temperature risks irreversible degradation of Schottky barrier integrity.
Can STPS3030CG-TR be used in parallel configurations?
STPS3030CG-TR is not recommended for parallel operation due to inherent forward voltage mismatch between diodes, which causes current imbalance and potential thermal runaway. Each device contains two matched diodes internally, but inter-device matching is not guaranteed. For higher current, use a single higher-rated part such as STPS6030CG or implement external current-sharing resistors with derating.
Is the D2PAK tab electrically isolated from the anodes?
No - the metal tab is the common cathode terminal, electrically connected to both internal Schottky cathodes. It is not isolated and must be treated as a live circuit node tied to the output rail. PCB layout must ensure the tab is soldered to a dedicated cathode copper pour, with no unintended shorts to adjacent traces or ground planes.
Does STPS3030CG-TR require a minimum load or snubber network?
No minimum load is required. Due to its Schottky construction, it exhibits negligible reverse recovery charge (Qrr ≈ 0) and does not generate switching spikes - eliminating the need for snubber networks in typical DC/DC applications. However, a small RC snubber may still be used at the anode nodes if EMI exceeds regulatory limits at very high switching frequencies (>500 kHz).
STPS3030CG-TR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 30 V
- Current - Average Rectified (Io) (per Diode):
- 15A
- Voltage - Forward (Vf) (Max) @ If:
- 490 mV @ 15 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 1 mA @ 30 V
- Operating Temperature - Junction:
- 150°C (Max)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- D2PAK
STPS3030CG-TR FAQ
1.How can I place an order for STPS3030CG-TR through Aetrix?
Please submit a Request for Quotation (RFQ) for STPS3030CG-TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STPS3030CG-TR reliable?
The price and inventory of STPS3030CG-TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STPS3030CG-TR is usually 5 days.
3.What payment methods are accepted for STPS3030CG-TR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STPS3030CG-TR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STPS3030CG-TR?
STPS3030CG-TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STPS3030CG-TR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STPS3030CG-TR?
For technical support, including STPS3030CG-TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STPS3030CG-TR requirements.
6.How does Aetrix verify that STPS3030CG-TR is sourced from the original manufacturer or authorized distributors?
All STPS3030CG-TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STPS3030CG-TR meets industry standards.
7.What is the process for return or replacement of STPS3030CG-TR?
All STPS3030CG-TR units undergo pre-shipment inspection (PSI). If there is an issue with STPS3030CG-TR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STPS3030CG-TR part is unused and in its original packaging.
Return procedure for STPS3030CG-TR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STPS3030CG-TR Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
