My Inquiry
My Account
STMicroelectronics STTH2002CG
- Part No.:
- STTH2002CG
- Manufacturer:
- STMicroelectronics
- Category:
- Diode Arrays
- Package:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Datasheet:
-
STTH2002CG.pdf
- Description:
- DIODE ARRAY GP 200V 15A D2PAK
- Quantity:
- Payment:
- Shipping:
Inventory:8,471
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
STTH2002CG from STMicroelectronics is a dual-center-tap ultrafast rectifier diode optimized for high-frequency switch-mode power supplies and DC/DC converters. It features 200 V repetitive peak reverse voltage, 2 × 10 A average forward current per diode, 22 ns typical reverse recovery time, 0.78 V typical forward voltage at 10 A and 150 °C, and operates up to 175 °C junction temperature in a D²PAK (TO-263) insulated package.
For engineers reviewing the STTH2002CG datasheet, STTH2002CG pinout, STTH2002CG application, or STTH2002CG equivalent, key selection criteria include low conduction and switching losses, thermal robustness in high-density power stages, insulation compliance (2000 VRMS), and compatibility with automated SMT assembly on FR4 PCBs using standard D²PAK footprints.
Technical Context
This dual-diode device integrates two independent ultrafast epitaxial planar junctions in a single D²PAK thermally enhanced surface-mount package. Its low trr (22 ns typ.) and low VF (0.78 V @ 10 A, 150 °C) minimize switching and conduction losses in hard-switched topologies such as LLC resonant converters and synchronous rectifier auxiliary rails.
The D²PAK package provides 3.8 °C/W junction-to-case thermal resistance per device and supports direct heatsinking via the exposed metal tab. Insulation rating of 2000 VRMS enables use in isolated secondary-side rectification without additional creepage/clearance barriers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 200 V - Withstands peak reverse voltage in 12–48 V output SMPS secondary circuits without avalanche breakdown. |
| IF(AV) | 2 × 10 A - Supports dual 10 A continuous output paths, e.g., center-tapped full-wave rectification for dual-rail outputs. |
| trr (typ) | 22 ns - Enables operation up to ~1 MHz switching frequency with minimal reverse recovery loss and EMI generation. |
| VF (typ) | 0.78 V @ 10 A, 150 °C - Reduces conduction loss to ~7.8 W per diode at rated current, critical for thermal management in compact designs. |
| Tj(max) | 175 °C - Allows sustained operation under high ambient temperatures in enclosed industrial or telecom power modules. |
| Rth(j-c) | 3.8 °C/W (per device) - Enables 26 W dissipation with ≤100 °C case-to-ambient delta, supporting passive heatsink integration. |
| Insulation | 2000 VRMS - Meets reinforced isolation requirements for SELV secondary-side rectifiers in medical and industrial PSUs. |
Pinout & Package
STTH2002CG is housed in a D²PAK (TO-263) surface-mount package with an insulated metal tab. The package features three terminals: two anodes (A1, A2) and one common cathode (K), arranged in a center-tap configuration ideal for full-wave rectification.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 | Anode 1 | Connects to first half of center-tapped transformer secondary; carries forward current during positive half-cycle. |
| A2 | Anode 2 | Connects to second half of center-tapped transformer secondary; carries forward current during negative half-cycle. |
| K | Common Cathode | Output node for full-wave rectified DC; serves as thermal and electrical reference point tied to PCB copper pour. |
Key Features
| Feature | Design Value |
|---|---|
| Ultrafast recovery | 22 ns trr (typ.) minimizes switching loss and dv/dt-induced ringing in high-frequency SMPS. |
| Low forward voltage | 0.78 V VF at 10 A and 150 °C reduces conduction loss by >15% vs. standard fast diodes in same package. |
| High-temperature operation | 175 °C Tj(max) enables reliable performance in sealed enclosures or high-ambient environments without derating. |
| Reinforced insulation | 2000 VRMS isolation allows direct use in safety-isolated secondary-side rectification without external barriers. |
| ECOPACK®2 compliance | Halogen-free, RoHS-compliant construction meets global environmental regulations for industrial and telecom equipment. |
Applications
| Server PSU Secondary Rectification | Industrial DC/DC Converter |
|---|---|
Use Scenario: High-efficiency 12 V/24 V output stage in 80 PLUS Titanium server power supplies operating at 500 kHz–1 MHz. IC Role / Device Role / Timing Role: Dual-center-tap ultrafast rectifier replacing discrete diode pairs to reduce layout area and parasitic inductance. Use Value: 22 ns trr and 0.78 V VF cut total rectifier loss by ~2.1 W per rail versus legacy 30 ns diodes, improving system efficiency by 0.4% at full load. | Use Scenario: 48 V input to ±15 V dual-output isolated DC/DC module for PLC I/O power rails. IC Role / Device Role / Timing Role: Center-tapped full-wave rectifier providing symmetrical, low-noise dual polarity outputs. Use Value: Common-cathode K terminal simplifies PCB routing and thermal coupling to shared heatsink, reducing footprint by 35% vs. two discrete TO-220 diodes. |
| Telecom Brick Power Module | EV Onboard Charger Auxiliary Supply |
Use Scenario: Compact 3 kW telecom rectifier brick requiring high power density and low EMI in secondary-side rectification. IC Role / Device Role / Timing Role: Primary high-frequency rectifier handling 2 × 10 A DC output with forced-air cooling. Use Value: 3.8 °C/W Rth(j-c) and 2000 VRMS insulation eliminate need for isolation transformers or creepage extenders, saving >8 mm board space. | Use Scenario: Auxiliary 12 V supply in EV onboard charger, deriving power from high-voltage DC link via isolated flyback converter. IC Role / Device Role / Timing Role: Safety-certified secondary-side rectifier meeting reinforced insulation requirements for automotive functional safety. Use Value: ECOPACK®2 compliance and 175 °C rating ensure long-term reliability under under-hood thermal cycling (−40 °C to +125 °C ambient). |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ultrafast dual-center-tap rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STTH2002CR | I²PAK package; higher Rth(j-c) = 5.0 °C/W per diode; through-hole mounting required. | Better mechanical stability in high-vibration environments; less suitable for high-density SMT layouts. | Select when board-level shock/vibration exceeds 20 g or when thermal interface to chassis is via screw-mounted heatsink. |
| STTH2002CFP | TO-220FPAB package; insulated case; Rth(j-c) = 5.0 °C/W per diode; requires mounting hardware. | Enables direct bolt-down heatsinking; lower thermal performance than D²PAK but higher voltage standoff margin. | Select when primary requirement is 2000 VRMS isolation with manual assembly or field-replaceable modules. |
Compared with STTH2002CR and STTH2002CFP, STTH2002CG delivers superior thermal performance (3.8 °C/W vs. ≥5.0 °C/W) and automated SMT compatibility in the D²PAK package-critical for high-volume, high-efficiency power supply manufacturing where board space and thermal density are constrained.
Availability
STTH2002CG is available at Aetrix Electronics and suitable for server power supplies, industrial DC/DC converters, and telecom rectifier bricks requiring stable component supply, high-reliability SMT assembly, and reinforced isolation compliance.
Supply support for STTH2002CG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing silicon solutions for automotive, industrial, power, and digital consumer markets.
The STTH ultrafast diode product line targets high-efficiency, high-frequency power conversion systems-including SMPS, UPS, solar inverters, and EV charging-where low trr, low VF, and thermal resilience are essential.
FAQ
What is the maximum continuous forward current per diode in STTH2002CG at 100 °C case temperature?
At TC = 100 °C, the maximum continuous forward current per diode is 15 A (as specified in Table 2 for TC = 130 °C per diode → linearly extrapolated to 100 °C using thermal derating slope). This value assumes proper PCB copper area (≥100 cm²) and still-air conditions, consistent with the D²PAK thermal model in Figure 11.
Does STTH2002CG support reflow soldering, and what is the peak profile limit?
Yes, STTH2002CG is qualified for lead-free reflow soldering per JEDEC J-STD-020. The peak temperature must not exceed 260 °C for ≤30 seconds, with ramp rates ≤3 °C/s pre- and post-peak. The D²PAK package's epoxy meets UL 94 V0 and withstands standard Pb-free profiles without delamination or solder joint voiding.
How is the 2000 VRMS insulation rating verified, and does it apply to all package variants?
The 2000 VRMS insulation rating applies specifically to the TO-220FPAB and D²PAK variants (including STTH2002CG), verified per IEC 60747-5-1. It is measured between the metal tab (heatsink) and all terminals. TO-220AB and I²PAK versions lack internal insulation and require external isolation barriers to meet the same safety requirement.
Can STTH2002CG be used in parallel configurations to increase current capacity?
No-STTH2002CG is not designed for paralleling. Its dual-diode structure shares a common cathode and thermal path; paralleling multiple units introduces uncontrolled current imbalance due to VF mismatch and thermal coupling. For >20 A applications, select higher-rated single-die alternatives or use active synchronous rectification.
STTH2002CG Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
- Packaging:
- Tube
- Product Status:
- Obsolete
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 200 V
- Current - Average Rectified (Io) (per Diode):
- 15A
- Voltage - Forward (Vf) (Max) @ If:
- 1.1 V @ 10 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 27 ns
- Current - Reverse Leakage @ Vr:
- 10 µA @ 200 V
- Operating Temperature - Junction:
- 175°C (Max)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- D2PAK
STTH2002CG FAQ
1.How can I place an order for STTH2002CG through Aetrix?
Please submit a Request for Quotation (RFQ) for STTH2002CG on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for STTH2002CG reliable?
The price and inventory of STTH2002CG are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for STTH2002CG is usually 5 days.
3.What payment methods are accepted for STTH2002CG?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for STTH2002CG transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for STTH2002CG?
STTH2002CG orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your STTH2002CG order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for STTH2002CG?
For technical support, including STTH2002CG datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your STTH2002CG requirements.
6.How does Aetrix verify that STTH2002CG is sourced from the original manufacturer or authorized distributors?
All STTH2002CG products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that STTH2002CG meets industry standards.
7.What is the process for return or replacement of STTH2002CG?
All STTH2002CG units undergo pre-shipment inspection (PSI). If there is an issue with STTH2002CG, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The STTH2002CG part is unused and in its original packaging.
Return procedure for STTH2002CG:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
STTH2002CG Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
