My Inquiry
My Account
STMicroelectronics T810-600B-TR
- Part No.:
- T810-600B-TR
- Manufacturer:
- STMicroelectronics
- Category:
- TRIACs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
T810-600B-TR.pdf
- Description:
- TRIAC SENS GATE 600V 8A DPAK
- Quantity:
- Payment:
- Shipping:
Inventory:25,744
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
T810-600B-TR from STMicroelectronics is a snubberless, logic-level 8 A triac in DPAK package, rated for 600 V repetitive peak off-state voltage (VDRM/VRRM), with guaranteed 10 mA maximum gate trigger current (IGT) and 1.55 V max on-state voltage (VTM) at 11 A. It operates across -40 °C to +125 °C junction temperature and delivers stable AC switching in phase-controlled motor speed controllers and static relays driving inductive loads.
For engineers reviewing the T810-600B-TR datasheet, T810-600B-TR pinout, T810-600B-TR application, or T810-600B-TR equivalent, this device is selected for high-commutation inductive load switching where low IGT, snubberless operation, and DPAK thermal performance (Rth(j-c) = 1.6 °C/W) are critical design requirements.
Technical Context
This triac belongs to ST's Snubberless Logic-Level (SLL) 3-quadrant family, optimized for direct microcontroller interface without external gate amplification. Its dV/dt immunity reaches 400 V/µs at 125 °C and commutation robustness is validated by (dl/dt)c ≥ 5.4 A/ms under high (dV/dt)c conditions - enabling reliable turn-off in inductive circuits without snubbers.
It features a ceramic-insulated die attach in DPAK, supporting safe isolation in AC mains-connected systems. The device exhibits low dynamic resistance (RD = 50 mΩ) and tight VGT ≤ 1.2 V, ensuring consistent triggering across temperature and load variations in heating regulation and light dimming applications.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| IT(RMS) | 8 A RMS on-state current - supports continuous 1 kW resistive or 750 W inductive load at Tc = 110 °C |
| VDRM / VRRM | 600 V - withstands full-cycle AC line surges up to 600 V peak without conduction |
| IGT (max) | 10 mA - compatible with 3.3 V/5 V MCU GPIOs without buffer stage |
| VTM | 1.55 V @ 11 A - low conduction loss enables <1.7 W power dissipation at full RMS current |
| dV/dt (min) | 400 V/µs @ Tj = 125 °C - eliminates need for RC snubber in motor starting circuits |
| Rth(j-c) | 1.6 °C/W - enables efficient heatsinking via PCB copper pad (≥1 cm²) for compact designs |
| ITSM (50 Hz) | 80 A non-repetitive surge - handles 10× overload for motor startup transients |
Pinout & Package
DPAK (TO-252) surface-mount package with insulated tab (no internal isolation barrier), 3-pin configuration: A1 (MT1), A2 (MT2), G (Gate). Thermal pad on underside requires soldered copper area for junction-to-case heat transfer.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 (MT1) | Main Terminal 1 | AC line return path; referenced to gate for triggering in Quadrants I, II, III |
| A2 (MT2) | Main Terminal 2 | AC line input; polarity defines quadrant conduction behavior during gate pulse |
| G | Gate | Low-current control input; triggers bidirectional conduction when IGT ≥ 10 mA applied between G–A1 |
Key Features
| Feature | Design Value |
|---|---|
| Snubberless operation | Validated (dl/dt)c ≥ 5.4 A/ms at 125 °C - eliminates external RC network in fan/motor drives |
| Logic-level gate drive | IGT ≤ 10 mA @ VD = 12 V - interfaces directly with STM32, ESP32, or PIC GPIOs |
| High dV/dt immunity | 400 V/µs @ Tj = 125 °C - prevents false triggering in noisy industrial environments |
| Low on-state resistance | RD = 50 mΩ - reduces conduction losses and thermal stress vs. standard triacs |
| Halogen-free ECOPACK2 | Meets UL94 V0 and RoHS - compliant for consumer and industrial safety certifications |
Applications
| Motor Speed Control | Heating Regulation |
|---|---|
|
Use Scenario: Variable-speed control of universal motors in power tools and HVAC blowers using phase-angle firing. IC Role / Device Role / Timing Role: Bidirectional AC switch triggered by zero-crossing synchronized PWM pulses to modulate RMS voltage. Use Value: Enables precise torque/speed tuning with 8 A continuous current handling and no snubber components. |
Use Scenario: Solid-state temperature regulation in electric ovens, coffee makers, and industrial heaters. IC Role / Device Role / Timing Role: ON/OFF switching element controlled by PID output to cycle power to resistive heating elements. Use Value: Delivers 600 V blocking margin for 240 VAC mains and 10 mA IGT simplifies microcontroller interface. |
| Light Dimming | Static Relay Replacement |
|
Use Scenario: Leading-edge dimming of incandescent and halogen lamps in residential and commercial lighting. IC Role / Device Role / Timing Role: Phase-controlled AC switch triggered after zero-crossing to adjust conduction angle per half-cycle. Use Value: Low VTM (1.55 V) minimizes self-heating during partial conduction; DPAK allows compact PCB layout. |
Use Scenario: Solid-state replacement of electromechanical relays in PLC I/O modules and building automation panels. IC Role / Device Role / Timing Role: High-reliability AC load switch activated by 3.3 V logic signals without external drivers. Use Value: Snubberless design ensures long-term reliability with inductive solenoid/valve loads; Rth(j-c) = 1.6 °C/W supports fanless operation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BTA08-600SW | TO-220AB insulated package; higher Rth(j-c) = 2.5 °C/W; IGT = 10 mA same | Requires mechanical mounting and heatsink; better isolation (2500 VRMS tab) | Select when reinforced insulation or higher surge immunity is required over space-constrained SMT layout |
| T835-600B | DPAK package; higher IGT = 35 mA; same VDRM and IT(RMS); snubberless but not logic-level | Needs gate driver for MCU interface; superior commutation (dl/dt)c = 7 A/ms | Select when driving highly inductive loads (e.g., contactor coils) where gate drive capability exists |
Compared with BTA08-600SW, T810-600B-TR offers superior thermal efficiency in SMT layouts; compared with T835-600B, it provides lower gate drive burden at the cost of slightly reduced commutation margin - making it optimal for MCU-driven, space-limited AC control.
Availability
T810-600B-TR is available at Aetrix Electronics and suitable for motor speed control, heating regulation, light dimming, and static relay replacement requiring stable component supply, tape-and-reel packaging for automated assembly, and long-term lifecycle support.
Supply support for T810-600B-TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, mixed-signal, power, and microcontroller solutions for industrial, automotive, and consumer markets.
T810-600B-TR belongs to ST's Snubberless Logic-Level Triac product line, engineered specifically for direct microcontroller-driven AC switching in compact, thermally constrained, inductive-load applications.
FAQ
What is the maximum junction temperature for continuous operation?
The T810-600B-TR has an operating junction temperature range of -40 °C to +125 °C. Continuous operation at Tj = 125 °C is permitted when case temperature (Tc) is maintained at ≤110 °C per absolute maximum ratings, verified by thermal design using Rth(j-c) = 1.6 °C/W and adequate PCB copper area.
Does this triac require a snubber circuit for inductive loads?
No. The T810-600B-TR is a certified snubberless triac with validated commutation performance: (dl/dt)c ≥ 5.4 A/ms at 125 °C and dV/dt immunity of 400 V/µs. It reliably commutates inductive loads such as motors and solenoids without external RC snubbers when properly heatsinked.
Can it be driven directly by a 3.3 V microcontroller GPIO?
Yes. With guaranteed IGT ≤ 10 mA and VGT ≤ 1.2 V, the T810-600B-TR can be triggered directly by standard 3.3 V or 5 V MCU outputs. A series current-limiting resistor (e.g., 330 Ω for 3.3 V) ensures gate current stays within spec while providing noise margin.
What is the thermal resistance from junction to ambient in standard PCB layout?
In a typical FR4 PCB with 1 cm² copper area under the DPAK thermal pad, Rth(j-a) is 70 °C/W (typical). This value assumes 35 µm copper thickness and no additional heatsink; actual performance improves with larger copper areas or forced airflow.
T810-600B-TR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Triac Type:
- Logic - Sensitive Gate
- Voltage - Off State:
- 600 V
- Current - On State (It (RMS)) (Max):
- 8 A
- Voltage - Gate Trigger (Vgt) (Max):
- 1.3 V
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- 80A, 84A
- Current - Gate Trigger (Igt) (Max):
- 10 mA
- Current - Hold (Ih) (Max):
- 15 mA
- Configuration:
- Single
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DPAK
T810-600B-TR FAQ
1.How can I place an order for T810-600B-TR through Aetrix?
Please submit a Request for Quotation (RFQ) for T810-600B-TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for T810-600B-TR reliable?
The price and inventory of T810-600B-TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for T810-600B-TR is usually 5 days.
3.What payment methods are accepted for T810-600B-TR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for T810-600B-TR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for T810-600B-TR?
T810-600B-TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your T810-600B-TR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for T810-600B-TR?
For technical support, including T810-600B-TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your T810-600B-TR requirements.
6.How does Aetrix verify that T810-600B-TR is sourced from the original manufacturer or authorized distributors?
All T810-600B-TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that T810-600B-TR meets industry standards.
7.What is the process for return or replacement of T810-600B-TR?
All T810-600B-TR units undergo pre-shipment inspection (PSI). If there is an issue with T810-600B-TR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The T810-600B-TR part is unused and in its original packaging.
Return procedure for T810-600B-TR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
T810-600B-TR Tags
-
Z0103NN5AA4
STMicroelectronics
-
Z0107MNT1G
Littelfuse Inc.
-
Z0103MNT1G
Littelfuse Inc.
;;2.jpg)
-
T405-800B-TR
STMicroelectronics
-
T835-600B-TR
STMicroelectronics
.JPG)
-
2N6073BG
Littelfuse Inc.
-
2N6075BG
Littelfuse Inc.
-
BTA08-600CWRG
STMicroelectronics
-
T835H-6G-TR
STMicroelectronics
-
BTA16-800BRG
STMicroelectronics
-
T1210-800G-TR
STMicroelectronics
-
MAC4DHMT4G
Littelfuse Inc.
Tech Hub
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
