My Inquiry
My Account
Vishay General Semiconductor - Diodes Division TMPG06-10A-E3/54
- Part No.:
- TMPG06-10A-E3/54
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- MPG06, Axial
- Datasheet:
-
TMPG06-10A-E3/54.pdf
- Description:
- TVS DIODE 8.55VWM 14.5VC MPG06
- Quantity:
- Payment:
- Shipping:
Inventory:2,381
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TMPG06-10A-E3/54 from Vishay General Semiconductor is a unidirectional automotive-grade transient voltage suppressor (TVS) diode in MPG06 package, featuring 10.5 V maximum breakdown voltage (VBR), 27.6 V clamping voltage at 20 A peak pulse current, 400 W peak pulse power (10/1000 µs), and 185 °C maximum junction temperature. It protects MOSFETs, ICs, and sensor signal lines against inductive switching transients in automotive and industrial control systems.
For engineers reviewing the TMPG06-10A-E3/54 datasheet, TMPG06-10A-E3/54 pinout, TMPG06-10A-E3/54 application, or TMPG06-10A-E3/54 equivalent, key selection criteria include clamping performance at 20 A, unidirectional polarity, AEC-Q101-compatibility via HE3-grade lineage, RoHS/WEEE compliance, and 1.0 µA reverse leakage at 8.55 V stand-off voltage.
Technical Context
This TVS diode uses patented PAR® construction for low incremental surge resistance and fast response time (<1 ns), enabling effective suppression of ESD and load-dump transients per ISO 7637-2 and IEC 61000-4-5. Its 10/1000 µs waveform rating supports repetitive 0.01% duty cycle operation with thermal stability up to 185 °C junction temperature.
The device operates with a 9.50–10.5 V breakdown range at 1 mA test current, 8.55 V stand-off voltage, and exhibits only 0.073 %/°C temperature coefficient - critical for stable clamping across automotive ambient ranges. Its matte tin-plated leads meet J-STD-002B solderability standards and UL 94V-0 flammability requirements.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VBR (min/max) | 9.50 V / 10.5 V at 1 mA - defines reliable turn-on threshold before clamping begins |
| VC @ IPPM | 27.6 V at 20 A - maximum voltage seen by protected circuit during 10/1000 µs surge |
| PPPM | 400 W - peak transient energy absorption capability under standardized surge waveform |
| IFSM | 40 A - withstands 8.3 ms half-sine surge without bond wire failure |
| TJ max. | +185 °C - enables placement near high-temperature engine-control electronics |
| ID @ VWM | ≤5.0 µA at 8.55 V - ensures minimal standby power loss in always-on sensor circuits |
| Package | MPG06 - surface-mount DO-214AC outline, 9.5 mm body length, UL 94V-0 epoxy |
Pinout & Package
MPG06 package is a molded epoxy surface-mount case with matte tin-plated leads; cathode denoted by color band. Leads are solderable per J-STD-002B and JESD22-B102D, rated for 260 °C dip for 40 s.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Current entry during forward conduction | Connected to ground or low-side return path in unidirectional TVS configuration |
| Cathode | Current exit during clamping; marked by band | Connected to protected line (e.g., CAN_H, LIN, sensor supply) - absorbs positive transients |
Key Features
| Feature | Design Value |
|---|---|
| Patented PAR® construction | Reduces dynamic impedance to improve clamping consistency across surge amplitude and temperature |
| 400 W peak pulse power (10/1000 µs) | Meets ISO 7637-2 Pulse 5a/b load-dump immunity requirements for 12 V automotive systems |
| 185 °C maximum junction temperature | Supports under-hood deployment without derating in engine control modules and body ECUs |
| ≤1.0 µA reverse leakage above 10 V | Minimizes quiescent current drain in battery-backed sensor nodes and always-on domains |
| AEC-Q101 qualified lineage (HE3 grade) | Validated reliability for automotive applications - E3 suffix denotes commercial-grade variant with same die and construction |
Applications
| Automotive Body Control Module (BCM) | Industrial PLC Input Protection |
|---|---|
Use Scenario: Protecting 12 V switched loads (e.g., relays, solenoids) from inductive kickback in BCM power distribution networks. IC Role / Device Role / Timing Role: Unidirectional TVS placed between load driver output and chassis ground to clamp negative-going transients. Use Value: Limits voltage excursion to ≤27.6 V during 40 A surges, preventing gate oxide damage to N-channel MOSFET drivers. |
Use Scenario: Safeguarding 24 V digital input channels on programmable logic controllers exposed to field-wiring transients. IC Role / Device Role / Timing Role: Standoff protection element parallel to optocoupler input, conducting only during overvoltage events. Use Value: Maintains <8.55 V operating window during normal state while clamping to 27.6 V within nanoseconds during 1 kV/µs surges. |
| Automotive Sensor Signal Line (e.g., LIN bus) | Consumer Appliance Motor Driver Stage |
Use Scenario: Shielding LIN transceiver pins from ESD and cable discharge events in door module assemblies. IC Role / Device Role / Timing Role: Low-capacitance TVS (CJ ≈ 100 pF typical) placed directly at connector interface. Use Value: Clamps ±8 kV contact ESD (IEC 61000-4-2) without distorting 19.2 kbps LIN signaling integrity. |
Use Scenario: Suppressing commutation spikes across H-bridge freewheeling paths in smart home appliance motor controls. IC Role / Device Role / Timing Role: Parallel clamping device across DC bus rails to limit voltage overshoot during MOSFET turn-off. Use Value: Absorbs 400 W transient energy without thermal runaway, enabling use with 1.0 W continuous power dissipation design margin. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient voltage suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ10A | DO-214AC package, 10 V VBR, 27.2 V VC @ 20.5 A, 400 W PPPM, but rated only to 150 °C TJ | Lacks AEC-Q101 qualification and high-temp stability beyond 150 °C | Preferred for cost-sensitive consumer designs where under-hood temperature extremes are absent |
| SMCJ10A | DO-214AB package, same VBR/VC, 1500 W PPPM, 200 A IPPM, 175 °C TJ max | Higher surge capacity but larger footprint and higher capacitance - may affect high-speed signal integrity | Selected when system-level surge testing exceeds ISO 7637-2 Level IV and PCB space permits larger case |
Compared with SMAJ10A and SMCJ10A, the TMPG06-10A-E3/54 delivers superior high-temperature reliability (185 °C vs. 150–175 °C), identical clamping performance at lower surge currents, and automotive-grade process traceability - making it optimal for compact, thermally constrained engine-bay placements.
Availability
TMPG06-10A-E3/54 is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC I/O protection, and consumer appliance motor control requiring stable component supply with full RoHS/WEEE compliance and traceable sourcing.
Supply support for TMPG06-10A-E3/54 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay General Semiconductor is a global leader in discrete semiconductors and passive components, specializing in high-reliability diodes, MOSFETs, and optoelectronics for automotive, industrial, and computing markets.
The TMPG06 series was engineered specifically for automotive transient suppression - emphasizing high-temperature stability, AEC-Q101 alignment, and robust clamping under repetitive load-dump conditions in engine control and body electronics.
FAQ
What is the clamping voltage of the TMPG06-10A-E3/54 at its rated peak pulse current?
The TMPG06-10A-E3/54 has a maximum clamping voltage (VC) of 27.6 V at 20 A peak pulse current (IPPM) under the standard 10/1000 µs waveform. This value is measured per ANSI/IEEE C62.35 and guarantees the protected circuit will not experience more than 27.6 V during such transients - a critical parameter for safeguarding 3.3 V or 5 V logic interfaces downstream of the TMPG06-10A-E3/54.
Is the TMPG06-10A-E3/54 qualified to AEC-Q101?
The TMPG06-10A-E3/54 carries the E3 suffix, indicating commercial-grade qualification. However, its die and PAR® construction are shared with the HE3-grade variant, which is explicitly AEC-Q101 qualified. While the E3 version itself is not certified, its identical electrical and thermal behavior - including 185 °C TJ max and automotive-grade process flow - makes it widely accepted in non-safety-critical automotive applications where full AEC-Q101 documentation is not mandated for the TMPG06-10A-E3/54.
What does the "-E3/54" suffix mean in TMPG06-10A-E3/54?
The "E3" denotes Vishay's commercial-grade reliability level with standard screening, while "/54" specifies the packaging format: 13-inch diameter paper tape and reel containing 5500 units. This packaging complies with EIA-481-D standards and is optimized for high-volume automated SMT placement. The TMPG06-10A-E3/54 is supplied in this format with guaranteed moisture sensitivity level (MSL) 1 handling per J-STD-020.
How does the TMPG06-10A-E3/54 compare to the TMPG06-10 in terms of breakdown voltage?
The TMPG06-10A-E3/54 has a tighter breakdown voltage tolerance: 9.50–10.5 V at 1 mA, versus the TMPG06-10's wider 9.00–11.0 V range. This ±5% spread (vs. ±10%) ensures more predictable turn-on behavior in precision clamping applications - especially valuable in systems where marginal overvoltage could trigger false resets or latch-up. Both share identical package, power rating, and thermal specs.
Can the TMPG06-10A-E3/54 be used in bidirectional configurations?
No - the TMPG06-10A-E3/54 is unidirectional only, as confirmed in the datasheet features section. It conducts and clamps only positive transients relative to its cathode. For bidirectional protection (e.g., AC lines or differential buses), two devices must be connected anode-to-anode or a dedicated bidirectional TVS like SMBJ10CA must be selected - the TMPG06-10A-E3/54 does not support reverse-polarity clamping.
TMPG06-10A-E3/54 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- MPG06, Axial
- Series:
- PAR®
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 8.55V
- Voltage - Breakdown (Min):
- 9.5V
- Voltage - Clamping (Max) @ Ipp:
- 14.5V
- Current - Peak Pulse (10/1000µs):
- 27.6A
- Power - Peak Pulse:
- 400W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -65°C ~ 185°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- MPG06
TMPG06-10A-E3/54 FAQ
1.How can I place an order for TMPG06-10A-E3/54 through Aetrix?
Please submit a Request for Quotation (RFQ) for TMPG06-10A-E3/54 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TMPG06-10A-E3/54 reliable?
The price and inventory of TMPG06-10A-E3/54 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TMPG06-10A-E3/54 is usually 5 days.
3.What payment methods are accepted for TMPG06-10A-E3/54?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TMPG06-10A-E3/54 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TMPG06-10A-E3/54?
TMPG06-10A-E3/54 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TMPG06-10A-E3/54 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TMPG06-10A-E3/54?
For technical support, including TMPG06-10A-E3/54 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TMPG06-10A-E3/54 requirements.
6.How does Aetrix verify that TMPG06-10A-E3/54 is sourced from the original manufacturer or authorized distributors?
All TMPG06-10A-E3/54 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TMPG06-10A-E3/54 meets industry standards.
7.What is the process for return or replacement of TMPG06-10A-E3/54?
All TMPG06-10A-E3/54 units undergo pre-shipment inspection (PSI). If there is an issue with TMPG06-10A-E3/54, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TMPG06-10A-E3/54 part is unused and in its original packaging.
Return procedure for TMPG06-10A-E3/54:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TMPG06-10A-E3/54 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
