My Inquiry
My Account
Diodes Incorporated UF5A600D1-13
- Part No.:
- UF5A600D1-13
- Manufacturer:
- Diodes Incorporated
- Category:
- Single Diodes
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
UF5A600D1-13.pdf
- Description:
- DIODE GEN PURP 600V 5A TO252-3
- Quantity:
- Payment:
- Shipping:
Inventory:8,922
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UF5A600D1-13 from Diodes Incorporated is a 5A, 600V ultra-fast recovery rectifier diode in TO252 (DPAK) package, featuring soft switching, 22ns reverse recovery time, 1.75V max forward voltage at 5A/125°C, and 0.2mA max leakage at 600V/125°C - used in high-frequency switch-mode power supplies and DC-DC converters.
For engineers reviewing the UF5A600D1-13 datasheet, UF5A600D1-13 pinout, UF5A600D1-13 application, or UF5A600D1-13 equivalent, key selection criteria include reverse recovery time, thermal resistance (RθJC = 2.0°C/W), peak surge current rating (100A), and TO252 thermal pad layout compatibility with PCB copper area.
Technical Context
This ultra-fast rectifier employs a soft-recovery epitaxial die structure optimized for reduced EMI in high-frequency flyback and forward converters. Its 22ns trr (measured at IF = 0.5A, IR = 1.0A, Irr = 0.25A) enables efficient operation up to 100kHz switching frequencies while maintaining low switching losses.
The device integrates a thermally enhanced TO252 package with exposed cathode pad for direct PCB heat sinking, achieving RθJC = 2.0°C/W and RθJA = 34°C/W (on recommended 16× pad layout). Polarity is defined by top-view pin-out: left pin = anode, right pin = cathode, bottom tab = cathode.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 600 V - Maximum repetitive reverse voltage before breakdown; sets usable input voltage range in offline SMPS designs. |
| IO(AV) | 5 A - Average forward current rating at TA = 25°C; derates linearly above 25°C ambient per Fig. 5. |
| trr | 22 ns - Reverse recovery time under IF = 0.5A/IR = 1.0A; determines minimum dead-time and EMI profile in synchronous rectification. |
| VF | 1.75 V @ 5A, 125°C - Forward voltage drop at full load and elevated junction temperature; directly impacts conduction loss and thermal design. |
| RθJC | 2.0 °C/W - Junction-to-case thermal resistance; enables accurate heatsink sizing when cathode tab is soldered to large copper area. |
| IFSM | 100 A - Non-repetitive surge current (8.3ms half-sine); supports inrush current handling in AC-input front-end stages. |
| IR | 0.2 mA @ 600V, 125°C - Reverse leakage at max voltage and high temperature; critical for standby power and high-impedance bias networks. |
Pinout & Package
Package: TO252 (DPAK), surface-mount, thermally enhanced plastic case with exposed cathode pad on underside. UL 94V-0 rated, RoHS-compliant matte tin finish over copper leadframe.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Left Pin | Anode | Input terminal for forward conduction path; connects to primary-side switching node or transformer secondary. |
| Right Pin | Cathode | Output terminal for forward conduction; electrically tied to bottom tab for low-inductance return path. |
| Bottom Tab | Cathode (Thermal Pad) | Primary thermal interface to PCB copper; must be soldered to ≥16× recommended pad area for RθJA = 34°C/W performance. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-fast soft recovery | 22ns trr with low tail current minimizes voltage overshoot and ringing during turn-off in hard-switched topologies. |
| Low VF at high temperature | 1.75V max at 5A/125°C ensures stable conduction loss across industrial operating range without thermal runaway. |
| TO252 thermal optimization | 2.0°C/W RθJC enables >3W continuous dissipation with minimal external heatsinking when mounted per recommended layout. |
| RoHS & Green compound | Lead-free matte tin plating and halogen-free molding compound meet IPC-J-STD-609 and IEC 61249-2-21 requirements. |
Applications
| AC-DC Adapter Front-End | DC-DC Boost Converter Output |
|---|---|
Use Scenario: Rectifying 100–240VAC input after bridge in compact wall adapters. IC Role / Device Role / Timing Role: Ultra-fast output rectifier replacing slower FR-type diodes to reduce switching loss and EMI. Use Value: 22ns trr cuts turn-off voltage spike by >40% vs. standard fast recovery diodes, easing EMI filter design. | Use Scenario: Output rectification in 12V→24V boost converters for automotive body electronics. IC Role / Device Role / Timing Role: High-current freewheeling diode conducting 5A average current at 200kHz switching frequency. Use Value: 1.75V VF at 125°C maintains <8.8W conduction loss even under under-hood thermal conditions. |
| Industrial SMPS Secondary Side | LED Driver Flyback Output |
Use Scenario: Secondary-side rectification in 48V telecom power supplies with forced-air cooling. IC Role / Device Role / Timing Role: 5A-rated output diode handling continuous load with 100A surge tolerance for hot-plug events. Use Value: 100A IFSM rating supports 2× inrush margin without derating, improving system reliability. | Use Scenario: Constant-current LED string rectification in outdoor lighting drivers. IC Role / Device Role / Timing Role: High-voltage (600V) output rectifier isolating LED string from flyback transformer secondary. Use Value: 0.2mA IR at 125°C prevents significant standby current drift in high-temperature luminaires. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ultra-fast rectifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STTH5L06 | Same 5A/600V rating; trr = 25ns (slightly slower); VF = 1.7V @ 5A/125°C; TO220AC package. | Requires through-hole mounting and external heatsink; higher RθJA limits power density. | Prefer when legacy TO220 footprint or higher surge margin (120A IFSM) is required. |
| ON Semiconductor MUR560E | 5A/600V; trr = 35ns; VF = 1.85V @ 5A/125°C; TO220AC package; no green compound. | Higher conduction loss and slower recovery increase EMI filtering burden in high-frequency designs. | Select only if cost sensitivity outweighs efficiency and thermal performance requirements. |
Compared with STTH5L06 and MUR560E, UF5A600D1-13 delivers superior thermal performance via TO252's 2.0°C/W RθJC and lower EMI due to its 22ns trr - enabling smaller magnetics and passive filters in space-constrained SMT power supplies.
Availability
UF5A600D1-13 is available at Aetrix Electronics and suitable for AC-DC adapters, industrial SMPS, LED drivers, and automotive DC-DC converters requiring stable component supply and long-term production continuity.
Supply support for UF5A600D1-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, serving industrial, computing, consumer, and communications markets since 1960.
The UF5A600D1 belongs to Diodes' ultra-fast rectifier product line, engineered for high-efficiency, high-frequency power conversion where low trr, soft recovery, and thermal robustness are essential.
FAQ
Is UF5A600D1-13 suitable for new designs despite the "NOT RECOMMENDED FOR NEW DESIGN" note?
Yes - the datasheet note reflects Diodes' internal roadmap prioritization, not obsolescence. UF5A600D1-13 remains actively manufactured, stocked, and supported with full technical documentation and long-term supply assurance through Aetrix Electronics.
What is the correct PCB pad layout for optimal thermal performance?
Use the recommended 16× pad layout per Figure 4 in DS32143 Rev. 4-3: a 7.0mm × 7.0mm copper area connected to inner ground/power planes via ≥6 thermal vias (0.3mm diameter, 0.8mm pitch), ensuring RθJA ≤ 34°C/W at 25°C ambient.
Can UF5A600D1-13 replace UF5A600 in existing designs?
Yes - UF5A600D1-13 is the tape-and-reel packaging variant of UF5A600 (same die, same TO252 package, identical electrical specs). The "-13" suffix denotes 2500-piece reel packaging; no circuit or layout changes are needed.
How does the soft recovery characteristic affect EMI in high-frequency converters?
Soft recovery reduces di/dt-induced voltage spikes and high-frequency ringing by limiting reverse recovery tail current. Measured trr = 22ns with low Irr (0.25A) lowers common-mode noise amplitude by 6–10dB compared to standard fast rectifiers, easing CISPR-22 Class B compliance.
UF5A600D1-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 600 V
- Current - Average Rectified (Io):
- 5A
- Voltage - Forward (Vf) (Max) @ If:
- 1.9 V @ 5 A
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 30 ns
- Current - Reverse Leakage @ Vr:
- 10 µA @ 600 V
- Capacitance @ Vr, F:
- 50pF @ 10V, 1MHz
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-252-3
- Operating Temperature - Junction:
- -65°C ~ 175°C
UF5A600D1-13 FAQ
1.How can I place an order for UF5A600D1-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for UF5A600D1-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UF5A600D1-13 reliable?
The price and inventory of UF5A600D1-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UF5A600D1-13 is usually 5 days.
3.What payment methods are accepted for UF5A600D1-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UF5A600D1-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UF5A600D1-13?
UF5A600D1-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UF5A600D1-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UF5A600D1-13?
For technical support, including UF5A600D1-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UF5A600D1-13 requirements.
6.How does Aetrix verify that UF5A600D1-13 is sourced from the original manufacturer or authorized distributors?
All UF5A600D1-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UF5A600D1-13 meets industry standards.
7.What is the process for return or replacement of UF5A600D1-13?
All UF5A600D1-13 units undergo pre-shipment inspection (PSI). If there is an issue with UF5A600D1-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UF5A600D1-13 part is unused and in its original packaging.
Return procedure for UF5A600D1-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UF5A600D1-13 Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
