My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VBUS054CD-FHI-GS08
- Part No.:
- VBUS054CD-FHI-GS08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- 10-UDFN Exposed Pad
- Datasheet:
-
VBUS054CD-FHI-GS08.pdf
- Description:
- TVS DIODE 5VWM 13VC LLP2513-11L
- Quantity:
- Payment:
- Shipping:
Inventory:4,552
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VBUS054CD-FHI-GS08 from Vishay Semiconductors is a 4-line bidirectional asymmetrical (BiAs) ESD protection diode array in LLP2513-11L package, rated for ±15 kV IEC 61000-4-2 contact/air discharge, 5 V reverse stand-off voltage, 0.8 pF typical capacitance, and <0.1 μA leakage current - deployed on HDMI, USB 2.0, and DisplayPort data lines to clamp transients while preserving signal integrity.
For engineers reviewing the VBUS054CD-FHI-GS08 datasheet, VBUS054CD-FHI-GS08 pinout, VBUS054CD-FHI-GS08 application, or VBUS054CD-FHI-GS08 equivalent, key selection criteria include low-capacitance flow-through routing, asymmetric clamping behavior for 5 V systems, MSL level 1 solderability, and verified compliance with IEC 61000-4-2/4-5 transient immunity standards.
Technical Context
The VBUS054CD-FHI-GS08 implements a Zener-based BiAs architecture with separate clamping thresholds for positive and negative transients: positive excursions clamp above 5 V (typ. 9.1 V at 1 A), while negative transients clamp below ground (typ. −1.6 V forward at 1 A). Its internal structure connects pins 3/8/11 to GND, and routes D1+/D1− (pins 1/2) and D2+/D2− (pins 4/5) through matched-pair ESD paths.
Designed for high-speed differential interfaces, it maintains impedance continuity via flow-through layout - signal traces pass straight under the device without vias or bends - minimizing reflections at up to 1.65 Gbit/s (HDMI). The LLP2513-11L package enables <0.6 mm height and 0.8 pF channel-to-ground capacitance, critical for maintaining eye diagram integrity in USB 2.0 and eSATA links.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ESD Rating | ±15 kV contact & air discharge per IEC 61000-4-2 - ensures robust handling of human-body-model surges in portable interface ports. |
| Reverse Stand-off Voltage | 5 V - matches standard USB/HDMI supply rails, preventing conduction during normal operation. |
| Capacitance (per line) | 0.8 pF at 0 V, 1 MHz - minimizes signal distortion and insertion loss on 480 Mbit/s USB 2.0 and 1.65 Gbit/s HDMI channels. |
| Leakage Current | <0.1 μA at 5 V - avoids DC loading of high-impedance receiver inputs in battery-powered devices. |
| Clamping Voltage (1 A) | 9.1 V (positive), −1.6 V (negative) - provides tight voltage limiting to protect downstream 5 V-tolerant PHYs without over-clamping. |
| Peak Pulse Power | 45 W per line (8/20 μs, IEC 61000-4-5) - sustains surge energy from lightning-induced or inductive-switching events. |
| Package | LLP2513-11L (2.5 × 1.3 × 0.6 mm) - ultra-low profile enables placement on dense HDI PCBs adjacent to connectors. |
Pinout & Package
VBUS054CD-FHI-GS08 uses the LLP2513-11L surface-mount package: 2.5 mm × 1.3 mm footprint, 0.6 mm max height, MSL level 1, and e4 finish (NiPdAu). Pin 1 is marked by a dot; pins 3, 8, and 11 are internally shorted to GND.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2 | D1+ / D1− | Differential pair for first high-speed channel (e.g., USB D+ / D−); bidirectional ESD path to GND. |
| 4, 5 | D2+ / D2− | Differential pair for second channel (e.g., HDMI TMDS data lanes); matched capacitance and clamping to ensure skew control. |
| 3, 8, 11 | GND | Internally connected ground terminals - must be tied to low-impedance system ground plane for effective transient shunting. |
| 6, 7, 9, 10 | NC | No internal connection - left floating; no PCB trace or pad required. |
Key Features
| Feature | Design Value |
|---|---|
| Flow-through layout | Enables straight PCB trace routing under device - eliminates stubs/vias that degrade 1.65 Gbit/s HDMI signal integrity. |
| Asymmetrical BiAs clamping | Clamps positive transients to ~9.1 V and negative to ~−1.6 V - optimized for 5 V rail systems without forward-biasing receivers. |
| Ultra-low capacitance | 0.8 pF per channel - preserves bandwidth and reduces jitter on USB 2.0 and DisplayPort 1.2 links. |
| Low-profile LLP package | 0.6 mm max height - fits beneath low-clearance shields and enables co-placement with micro-USB/HDMI receptacles. |
| MSL level 1 rating | Reflow-compatible at 260 °C/10 s - supports standard lead-free assembly without baking or special handling. |
Applications
| HDMI Interface Protection | USB 2.0 Port Protection |
|---|---|
Use Scenario: Protecting TMDS clock and data lanes between GPU and display panel in thin-client monitors. IC Role / Device Role / Timing Role: ESD transient suppressor on four differential pairs - placed immediately after HDMI connector to intercept surges before reaching SerDes PHY. Use Value: 0.8 pF capacitance prevents eye closure; ±15 kV rating meets IEC 61000-4-2 compliance for CE-marked consumer displays. | Use Scenario: Shielding upstream/downstream D+ and D− lines in portable docking stations with multiple USB hosts. IC Role / Device Role / Timing Role: Bidirectional clamping diode array - installed at USB Type-A receptacle to divert ESD from host controller and peripheral ICs. Use Value: Asymmetric clamping avoids forward-biasing 3.3 V USB PHYs during negative transients; flow-through design maintains 480 Mbit/s timing margins. |
| eSATA Data Line Protection | DisplayPort Source Protection |
Use Scenario: Securing external SATA II (3 Gbit/s) connections on NAS enclosures exposed to frequent cable hot-plug events. IC Role / Device Role / Timing Role: Low-capacitance ESD suppressor on TX/RX differential pairs - mounted directly at eSATA connector to minimize stub length. Use Value: 45 W peak pulse power handles inductive switching surges; 5 V VRWM aligns with SATA I/O voltage domain. | Use Scenario: Protecting DP++ source outputs (dual-mode DisplayPort driving HDMI/DVI) in ultrabooks with hybrid graphics. IC Role / Device Role / Timing Role: Four-channel ESD clamp on main link lanes - placed post-mux to cover both native DP and converted HDMI modes. Use Value: Matched-pair capacitance ensures <0.1 ps skew between lanes; MSL level 1 supports reflow during compact motherboard assembly. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPD4E001DQAR | 0.6 pF capacitance, ±12 kV ESD rating, SOT-563 package (1.6 × 1.6 mm), 5.5 V VRWM | Lower ESD immunity; larger footprint; suited for space-tolerant industrial USB hubs | Select when lower capacitance outweighs reduced surge margin and board area is not constrained. |
| SP3203-01ETG | 0.35 pF capacitance, ±15 kV ESD, 1.0 × 0.6 mm µDFN, 3.3 V VRWM | Lower working voltage - requires redesign if interfacing with 5 V HDMI/USB PHYs | Choose only for 3.3 V-only interfaces like MIPI D-PHY; not drop-in for VBUS054CD-FHI-GS08's 5 V applications. |
Compared with TPD4E001DQAR and SP3203-01ETG, the VBUS054CD-FHI-GS08 uniquely balances 5 V compatibility, ±15 kV immunity, and flow-through routing in a 2.5 × 1.3 mm footprint - making it optimal for HDMI/USB 2.0 designs where signal integrity and connector-proximal placement are critical.
Availability
VBUS054CD-FHI-GS08 is available at Aetrix Electronics and suitable for HDMI interface protection, USB 2.0 port hardening, and eSATA data line safeguarding requiring stable component supply across production lifecycles.
Supply support for VBUS054CD-FHI-GS08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in high-reliability diodes, MOSFETs, optoelectronics, and protection devices for automotive, industrial, and computing markets.
The VBUS054CD-FHI-GS08 belongs to Vishay's ESD protection portfolio targeting high-speed digital interfaces - engineered specifically to preserve signal fidelity while meeting stringent IEC 61000-4-2 immunity requirements in space-constrained consumer and commercial electronics.
FAQ
What is the maximum operating temperature range for the VBUS054CD-FHI-GS08?
The VBUS054CD-FHI-GS08 has a specified junction temperature range of −40 °C to +125 °C, enabling reliable operation in extended-temperature environments such as automotive infotainment head units and industrial display controllers. This range is validated per JEDEC J-STD-020 and supports continuous use in thermally demanding PCB layouts near power regulators or processors.
Does the VBUS054CD-FHI-GS08 support USB 3.0 or higher data rates?
No, the VBUS054CD-FHI-GS08 is characterized for USB 2.0 (480 Mbit/s) and HDMI 1.3 (1.65 Gbit/s) applications. Its 0.8 pF capacitance and flow-through design are optimized for those speeds, but it is not rated or tested for SuperSpeed USB 3.0 (5 Gbit/s) or HDMI 2.0 (6 Gbit/s) due to increased sensitivity to parasitic effects. For USB 3.0, Vishay recommends the VBUS055CD-FHI-GS08.
How many ESD protection channels does the VBUS054CD-FHI-GS08 provide?
The VBUS054CD-FHI-GS08 provides four independent ESD protection channels - configured as two matched differential pairs (D1+/D1− and D2+/D2−) - each with dedicated Zener-based clamping to GND. This allows simultaneous protection of two high-speed interfaces, such as HDMI data lanes and USB D+/D−, without cross-talk or performance degradation.
Is the VBUS054CD-FHI-GS08 RoHS-compliant and halogen-free?
Yes, the VBUS054CD-FHI-GS08 is RoHS-compliant per Directive 2011/65/EU and halogen-free per JEDEC JS709A. Vishay confirms full compliance in its material category documentation (doc. 99912), and the device carries an e4 finish (NiPdAu) with UL 94 V-0 molding compound - satisfying environmental requirements for consumer, medical, and industrial end equipment.
Can pins 6, 7, 9, and 10 of the VBUS054CD-FHI-GS08 be connected to ground or left floating?
Pins 6, 7, 9, and 10 of the VBUS054CD-FHI-GS08 are internally not connected (NC) and must be left floating - no PCB trace, solder mask opening, or thermal pad should be assigned to them. Connecting NC pins to ground or any other net may cause unintended coupling, reduce ESD performance, or violate the validated flow-through layout that ensures signal integrity in the VBUS054CD-FHI-GS08.
VBUS054CD-FHI-GS08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- 10-UDFN Exposed Pad
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Steering (Rail to Rail)
- Unidirectional Channels:
- 4
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 6.9V
- Voltage - Clamping (Max) @ Ipp:
- 13V
- Current - Peak Pulse (10/1000µs):
- 3.5A (8/20µs)
- Power - Peak Pulse:
- 45W
- Power Line Protection:
- Yes
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 0.8pF @ 1MHz
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- LLP2513-11L
VBUS054CD-FHI-GS08 FAQ
1.How can I place an order for VBUS054CD-FHI-GS08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VBUS054CD-FHI-GS08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VBUS054CD-FHI-GS08 reliable?
The price and inventory of VBUS054CD-FHI-GS08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VBUS054CD-FHI-GS08 is usually 5 days.
3.What payment methods are accepted for VBUS054CD-FHI-GS08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VBUS054CD-FHI-GS08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VBUS054CD-FHI-GS08?
VBUS054CD-FHI-GS08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VBUS054CD-FHI-GS08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VBUS054CD-FHI-GS08?
For technical support, including VBUS054CD-FHI-GS08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VBUS054CD-FHI-GS08 requirements.
6.How does Aetrix verify that VBUS054CD-FHI-GS08 is sourced from the original manufacturer or authorized distributors?
All VBUS054CD-FHI-GS08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VBUS054CD-FHI-GS08 meets industry standards.
7.What is the process for return or replacement of VBUS054CD-FHI-GS08?
All VBUS054CD-FHI-GS08 units undergo pre-shipment inspection (PSI). If there is an issue with VBUS054CD-FHI-GS08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VBUS054CD-FHI-GS08 part is unused and in its original packaging.
Return procedure for VBUS054CD-FHI-GS08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VBUS054CD-FHI-GS08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
