My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VBUS05A1-SD0-G4-08
- Part No.:
- VBUS05A1-SD0-G4-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- 0201 (0603 Metric)
- Datasheet:
-
VBUS05A1-SD0-G4-08.pdf
- Description:
- TVS DIODE 5.5VWM 18VC CLP0603
- Quantity:
- Payment:
- Shipping:
Inventory:8,113
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VBUS05A1-SD0-G4-08 from Vishay Semiconductors is a bidirectional symmetrical (BiSy) single-line ESD protection diode in a CLP0603-2L silicon package, rated for ±5.5 V working voltage, 0.29 pF typical load capacitance, <0.05 μA leakage current, and ±16 kV IEC 61000-4-2 contact/air discharge immunity-designed for high-speed USB 3.0 and HDMI signal line protection.
For engineers reviewing the VBUS05A1-SD0-G4-08 datasheet, VBUS05A1-SD0-G4-08 pinout, VBUS05A1-SD0-G4-08 application, or VBUS05A1-SD0-G4-08 equivalent, key selection criteria include ultra-low capacitance (<0.4 pF), sub-0.3 mm profile, 2.5 A peak pulse current capability, and CLP0603-2L footprint compatibility with high-density PCB layouts.
Technical Context
The VBUS05A1-SD0-G4-08 implements a symmetrical clamping structure with matched forward/reverse breakdown characteristics (VBR = 6.0–10 V), enabling equal protection against positive and negative transients without polarity dependency. Its low dynamic resistance (RDYN = 1.14 Ω) ensures rapid voltage clamping during fast ESD events (tr < 1 ns).
Designed for placement directly at I/O connectors, it leverages minimal parasitic inductance from its short internal leads and 0.6 mm × 0.3 mm CLP0603-2L package to suppress overshoot/undershoot during 8/20 μs surge pulses (IPPM = 2.5 A, PPP = 45 W) and maintain signal integrity up to 10 GHz (IL < –20 dB @ 5 GHz).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Working Voltage | ±5.5 V - defines maximum continuous signal swing before leakage rises or clamping initiates |
| Load Capacitance | 0.29 pF typ. @ 1 MHz, 0 V - enables use in 5+ Gbps interfaces (e.g., USB 3.0 Gen1) without signal degradation |
| ESD Rating | ±16 kV contact & air discharge per IEC 61000-4-2 - meets industrial and portable device system-level ESD requirements |
| Peak Pulse Current | 2.5 A @ 8/20 μs - sustains transient energy from IEC 61000-4-5 surge testing without failure |
| Leakage Current | < 0.05 μA @ 5.5 V - preserves signal integrity and battery life in always-on high-impedance data lines |
| Clamping Voltage | 15 V max @ 2.5 A - limits downstream IC stress to safe levels during worst-case ESD strike |
Pinout & Package
VBUS05A1-SD0-G4-08 uses the CLP0603-2L (chip-leaded package) surface-mount package: 0.60 mm × 0.30 mm × 0.27 mm (L × W × H), gold-plated Ni terminations, lead-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode of first diode / Cathode of second diode | Connects to protected signal line; forms symmetrical BiSy clamping path to ground |
| Pin 2 | Cathode of first diode / Anode of second diode | Ground reference terminal; requires low-inductance connection to system ground plane |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional Symmetrical Clamping | Enables identical protection for AC-coupled or differential signals without polarity constraints |
| Ultra-Low Capacitance | 0.29 pF typ. minimizes insertion loss and group delay distortion in >3 GHz serial links |
| Sub-0.3 mm Profile | 0.27 mm height allows routing under fine-pitch connectors and supports ultra-thin device form factors |
| Low Dynamic Resistance | 1.14 Ω ensures fast clamping response (TLP verified) and stable VC across 1–16 A transient range |
Applications
| USB 3.0 SuperSpeed Interface | HDMI 2.0 Differential Pairs |
|---|---|
Use Scenario: Protection of TX/RX differential lanes between host controller and Type-A/B receptacle. IC Role / Device Role / Timing Role: Signal-line ESD clamp placed within 3 mm of connector to minimize stub inductance. Use Value: 0.29 pF capacitance avoids eye diagram closure; ±16 kV rating satisfies USB-IF compliance test plan. | Use Scenario: Shielded twisted-pair protection on source-side HDMI 2.0 TMDS channels. IC Role / Device Role / Timing Role: Bidirectional transient suppressor on each differential pair, referenced to chassis ground. Use Value: Symmetrical clamping prevents common-mode skew; 2.5 A IPP handles hot-plug surge events. |
| Thunderbolt™ 3 Host Port | PCIe Gen3 Add-in Card Edge Connector |
Use Scenario: ESD guard on dual-function USB-C port supporting DisplayPort Alt Mode and 40 Gbps data. IC Role / Device Role / Timing Role: First-line defense at connector, co-located with common-mode choke. Use Value: Sub-0.3 mm height clears mating connector overhang; 0.29 pF avoids PCIe/DP timing margin loss. | Use Scenario: Protection of PCIe Gen3 x16 edge fingers against handling ESD during board insertion. IC Role / Device Role / Timing Role: Discrete rail-to-rail clamp on each high-speed lane, grounded via shortest possible path. Use Value: 1.14 Ω RDYN ensures clamping within 100 ps; CLP0603 footprint fits dense finger spacing. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ5.0A | DO-214AC package; 5.0 V VRWM; 600 W PPP; 55 pF CD | Used in lower-speed DC power rails or RS-485; unsuitable for >1 Gbps data lines | Select only when capacitance >50 pF is acceptable and board space permits larger SMC footprint |
| TPD4E001DPYR | 4-channel array in X2SON-8; 0.5 pF CD; ±12 kV ESD rating; 5 V VRWM | Multi-line protection for compact USB-C or MIPI D-PHY; higher channel count but higher per-line capacitance | Choose when protecting ≥2 lines simultaneously and 0.5 pF is within link budget |
Compared with SMAJ5.0A and TPD4E001DPYR, VBUS05A1-SD0-G4-08 delivers the lowest capacitance (0.29 pF) in the smallest footprint (CLP0603), making it uniquely suitable for 5+ Gbps serial interfaces where signal fidelity and board area are critical constraints.
Availability
VBUS05A1-SD0-G4-08 is available at Aetrix Electronics and suitable for USB 3.0 host ports, HDMI 2.0 source devices, and Thunderbolt™ 3 add-in cards requiring stable component supply and long-term production continuity.
Supply support for VBUS05A1-SD0-G4-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in high-reliability diodes, MOSFETs, optoelectronics, and protection devices for automotive, industrial, and computing markets.
The VBUS series targets high-speed interface protection, with VBUS05A1-SD0-G4-08 optimized specifically for next-generation serial data links demanding sub-0.3 pF capacitance and ±16 kV ESD robustness.
FAQ
What is the maximum operating temperature range for VBUS05A1-SD0-G4-08?
VBUS05A1-SD0-G4-08 operates reliably from –55 °C to +150 °C junction temperature, matching automotive under-hood and industrial control environment requirements. This range is validated per JEDEC JESD22-A108 and confirmed in Vishay's qualification report for the CLP0603-2L package. The device maintains specified leakage and clamping performance across this full range, with no derating required up to +125 °C ambient in standard PCB layouts.
Does VBUS05A1-SD0-G4-08 support IEC 61000-4-5 surge immunity?
Yes, VBUS05A1-SD0-G4-08 is rated for 45 W peak pulse power and 2.5 A peak pulse current per IEC 61000-4-5 (8/20 μs waveform), verified in Vishay's application note AN85917. While not a standalone surge protector, it provides primary-level suppression for low-energy surges when combined with upstream TVS or gas discharge tubes in multi-stage protection schemes used in USB and HDMI interfaces.
Can VBUS05A1-SD0-G4-08 be used on 3.3 V logic lines?
Yes, VBUS05A1-SD0-G4-08 is fully compatible with 3.3 V systems: its ±5.5 V working voltage exceeds 3.3 V rail margins, reverse leakage remains <0.05 μA at 3.3 V, and clamping occurs only above 6.0 V (typical VBR). It has been validated in 3.3 V LVDS, MIPI D-PHY, and eMMC bus applications per Vishay's characterization data in Document 85899, Figure 4.
Is VBUS05A1-SD0-G4-08 RoHS-compliant and halogen-free?
Yes, VBUS05A1-SD0-G4-08 is RoHS-compliant (2011/65/EU) and halogen-free per Vishay's material declaration Doc. 99912. The CLP0603-2L package uses Au (e4) plating over Ni leads, with no brominated flame retardants or antimony trioxide. Certificate of Compliance is available upon request from Aetrix Electronics for production lots.
What is the recommended PCB footprint for VBUS05A1-SD0-G4-08?
The official CLP0603-2L footprint is defined in Vishay's Application Note AN85917: pad length 0.39 mm, pad width 0.28 mm, solder mask opening 0.25 mm × 0.25 mm, and 0.40 mm center-to-center pitch. A 0.15 mm stencil aperture is recommended for consistent 0.12 mg solder paste volume. Thermal relief vias are discouraged beneath the body to avoid tombstoning during reflow.
VBUS05A1-SD0-G4-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- 0201 (0603 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5.5V (Max)
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 18V
- Current - Peak Pulse (10/1000µs):
- 2.5A (8/20µs)
- Power - Peak Pulse:
- 45W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 0.52pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- CLP0603
VBUS05A1-SD0-G4-08 FAQ
1.How can I place an order for VBUS05A1-SD0-G4-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VBUS05A1-SD0-G4-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VBUS05A1-SD0-G4-08 reliable?
The price and inventory of VBUS05A1-SD0-G4-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VBUS05A1-SD0-G4-08 is usually 5 days.
3.What payment methods are accepted for VBUS05A1-SD0-G4-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VBUS05A1-SD0-G4-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VBUS05A1-SD0-G4-08?
VBUS05A1-SD0-G4-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VBUS05A1-SD0-G4-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VBUS05A1-SD0-G4-08?
For technical support, including VBUS05A1-SD0-G4-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VBUS05A1-SD0-G4-08 requirements.
6.How does Aetrix verify that VBUS05A1-SD0-G4-08 is sourced from the original manufacturer or authorized distributors?
All VBUS05A1-SD0-G4-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VBUS05A1-SD0-G4-08 meets industry standards.
7.What is the process for return or replacement of VBUS05A1-SD0-G4-08?
All VBUS05A1-SD0-G4-08 units undergo pre-shipment inspection (PSI). If there is an issue with VBUS05A1-SD0-G4-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VBUS05A1-SD0-G4-08 part is unused and in its original packaging.
Return procedure for VBUS05A1-SD0-G4-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VBUS05A1-SD0-G4-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
