My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VBUS05B1-SD0-G4-08
- Part No.:
- VBUS05B1-SD0-G4-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- 0201 (0603 Metric)
- Datasheet:
-
VBUS05B1-SD0-G4-08.pdf
- Description:
- TVS DIODE 5.5VWM 18VC CLP0603
- Quantity:
- Payment:
- Shipping:
Inventory:188,795
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VBUS05B1-SD0-G4-08 from Vishay Semiconductors is a bidirectional symmetrical (BiSy) single-line ESD protection diode in a CLP0603-2L silicon package, rated for ±5.5 V working voltage, 0.29 pF typical load capacitance, <0.05 μA reverse leakage, and ±16 kV IEC 61000-4-2 contact/air discharge immunity-designed for high-speed data lines including USB 3.0 and HDMI.
For engineers reviewing the VBUS05B1-SD0-G4-08 datasheet, VBUS05B1-SD0-G4-08 pinout, VBUS05B1-SD0-G4-08 application, or VBUS05B1-SD0-G4-08 equivalent, key selection criteria include ultra-low capacitance, sub-0.3 mm profile, IEC 61000-4-5 45 W peak pulse power, clamping performance at 1 A and 2.5 A, and compatibility with reflow per JEDEC STD-020.
Technical Context
The VBUS05B1-SD0-G4-08 implements a symmetrical silicon avalanche diode structure enabling identical clamping behavior for positive and negative transients. Its CLP0603-2L package features short internal leads and minimal parasitic inductance, critical for preserving signal integrity during fast ESD events.
It operates within ±5.5 V reverse stand-off range with 6.0–10.0 V breakdown (at 1 mA), delivers 12–14 V clamping at 1 A IPP, and maintains 0.29 pF capacitance at both 0 V and 3.3 V bias-enabling use on 5 Gbps+ serial interfaces without measurable insertion loss up to 10 GHz.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Package | CLP0603-2L: 0.60 × 0.30 × 0.27 mm, height < 0.3 mm, compatible with standard 0201 footprint |
| Working Voltage | ±5.5 V VRWM: ensures full signal swing coverage for USB 3.0, HDMI TMDS, and PCIe Gen1/2 data lanes |
| Capacitance | 0.29 pF typ. at 1 MHz and 0 V: negligible loading on >5 Gbps differential signals |
| ESD Rating | ±16 kV contact & air (IEC 61000-4-2): meets industrial and portable device surge immunity requirements |
| Clamping Voltage | 15–18 V at 2.5 A IPP (IEC 61000-4-5): protects downstream PHYs with margin below 20 V absolute max ratings |
| Leakage Current | <0.05 μA at 5.5 V: avoids DC bias shift or power drain in always-on high-impedance receivers |
| Peak Pulse Power | 45 W (8/20 μs): sustains multiple high-energy surges without degradation |
Pinout & Package
CLP0603-2L is a 2-terminal leadless chip-scale package with exposed die pad; pin 1 marking indicated by open circle on top surface. Dimensions: 0.60 mm × 0.30 mm × 0.27 mm (max), 0.12 mg weight.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Terminal 1 | Anode/Cathode (symmetrical) | Bidirectional conduction path: connects to protected signal line; no polarity sensitivity |
| Terminal 2 | Anode/Cathode (symmetrical) | Ground reference terminal: low-inductance connection to system ground plane required for effective clamping |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low capacitance | 0.29 pF typ. enables placement directly at connector without equalization or de-embedding |
| Symmetrical bidirectional clamping | Identical VC response for ± transients eliminates need for orientation-aware layout |
| Sub-0.3 mm profile | Enables routing under fine-pitch connectors and preserves board real estate in slim devices |
| Low dynamic resistance | 1.14 Ω (TLP, 100 ns): minimizes voltage overshoot during nanosecond-scale ESD events |
| Gold-plated terminations | e4 plating (Au over Ni) ensures solderability and long-term intermetallic stability in humid environments |
Applications
| USB 3.0 SuperSpeed Lanes | HDMI 2.0 TMDS Channels |
|---|---|
Use Scenario: Protecting differential pairs between USB controller and Type-A/B/Type-C receptacle against ESD during hot-plug events. IC Role / Device Role / Timing Role: Passive bidirectional clamping diode placed immediately adjacent to connector pins. Use Value: 0.29 pF capacitance prevents signal rise-time degradation, maintaining eye diagram compliance at 5 Gbps. | Use Scenario: Shielding HDMI 2.0 TMDS clock and data channels from user-handling ESD in AV receivers and monitors. IC Role / Device Role / Timing Role: Line-to-ground transient suppressor mounted at PCB edge near HDMI connector. Use Value: ±16 kV IEC 61000-4-2 rating ensures robustness across CE/FCC-certified consumer electronics. |
| PCIe Gen2 Reference Clock | MIPI D-PHY Data Lanes |
Use Scenario: Safeguarding 100 MHz PCIe reference clock traces routed from slot to host controller in embedded computing modules. IC Role / Device Role / Timing Role: Single-line ESD clamp on each clock line, leveraging symmetrical response for AC-coupled signals. Use Value: Low leakage (<0.05 μA) prevents DC offset accumulation in series-capacitor-coupled clock paths. | Use Scenario: Protecting MIPI D-PHY high-speed data lanes in smartphone camera modules exposed to frequent handling. IC Role / Device Role / Timing Role: Ultra-compact CLP0603-2L device placed at flex-to-PCB interface on camera flex cable. Use Value: 0.27 mm height allows integration into space-constrained camera module assemblies without mechanical interference. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPD1E05U06DPYR | 0.35 pF typ. capacitance; 5.5 V VRWM; ±12 kV IEC 61000-4-2 | Lower ESD rating limits use in industrial-grade USB ports requiring ±16 kV | Preferred where cost sensitivity outweighs highest ESD margin and 0.06 pF extra capacitance is acceptable |
| ESD5Z5.0ST5G | 0.65 pF typ.; SOD-523 package (1.2 × 0.8 × 0.6 mm); ±17 kV ESD rating | Larger footprint and higher capacitance restrict use on >3 Gbps interfaces | Selected when board space permits larger package and legacy SOD-523 assembly infrastructure exists |
Compared with TPD1E05U06DPYR and ESD5Z5.0ST5G, the VBUS05B1-SD0-G4-08 delivers the lowest capacitance in the smallest footprint while meeting the highest common ESD immunity level-making it optimal for next-generation high-speed mobile and computing interfaces where signal integrity and miniaturization are co-constrained.
Availability
VBUS05B1-SD0-G4-08 is available at Aetrix Electronics and suitable for USB 3.0, HDMI 2.0, and MIPI D-PHY designs requiring stable component supply, consistent CLP0603-2L packaging, and guaranteed IEC 61000-4-2 ±16 kV compliance.
Supply support for VBUS05B1-SD0-G4-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in high-reliability diodes, MOSFETs, optoelectronics, and passive components for automotive, industrial, and computing markets.
The VBUS05B1-SD0-G4-08 belongs to Vishay's BiSy ESD protection family, engineered specifically for ultra-high-speed digital interfaces where sub-0.3 pF capacitance and symmetrical clamping are mandatory for signal fidelity and system-level ESD certification.
FAQ
What is the maximum operating temperature range for the VBUS05B1-SD0-G4-08?
The VBUS05B1-SD0-G4-08 supports junction temperatures from -55 °C to +150 °C and storage temperatures over the same range. This wide thermal envelope allows deployment in automotive infotainment systems, industrial gateways, and outdoor-connected devices where ambient conditions exceed standard commercial limits. The CLP0603-2L package's low thermal mass enables rapid heat dissipation during transient clamping events.
Does the VBUS05B1-SD0-G4-08 require orientation-specific placement on the PCB?
No-the VBUS05B1-SD0-G4-08 is a symmetrical bidirectional device with identical electrical characteristics in either direction. Its CLP0603-2L package uses a non-polarized layout, and the open-circle marking indicates pin 1 only for tape-and-reel orientation-not functional polarity. This eliminates orientation errors during automated placement and simplifies layout for differential signal pairs.
Can the VBUS05B1-SD0-G4-08 be used on 10 Gbps USB 3.2 Gen2x1 channels?
Yes-the VBUS05B1-SD0-G4-08's 0.29 pF typical capacitance and flat frequency response up to 10 GHz (per Fig. 6 insertion loss curve) ensure minimal impact on 10 Gbps eye diagrams. Measured IL remains below -0.5 dB through 8 GHz, supporting USB 3.2 Gen2x1 compliance when placed within 3 mm of the connector. Layout best practices still apply: solid ground plane, minimized stub length, and controlled impedance routing.
What is the peak pulse current rating of the VBUS05B1-SD0-G4-08 under IEC 61000-4-5 conditions?
The VBUS05B1-SD0-G4-08 is rated for 2.5 A peak pulse current (IPPM) under IEC 61000-4-5 8/20 μs waveform conditions, delivering 45 W peak pulse power. This rating is validated per single-shot testing and supports repeated surge events in real-world deployments. The low dynamic resistance (1.14 Ω) ensures clamping voltage stays within safe margins for 3.3 V and 5 V PHY interfaces.
Is the VBUS05B1-SD0-G4-08 RoHS-compliant and lead-free?
Yes-the VBUS05B1-SD0-G4-08 carries RoHS-compliant + lead (Pb)-free terminations with e4 gold plating over nickel. It meets JEDEC J-STD-020 reflow standards with peak temperature up to 260 °C and is supplied in green 15 k/reel 8 mm tape. Full material compliance documentation-including exemption status per EU Directive 2011/65/EU-is available via Vishay document #99912.
VBUS05B1-SD0-G4-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- 0201 (0603 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5.5V (Max)
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 18V
- Current - Peak Pulse (10/1000µs):
- 2.5A (8/20µs)
- Power - Peak Pulse:
- 45W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 0.29pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- CLP0603
VBUS05B1-SD0-G4-08 FAQ
1.How can I place an order for VBUS05B1-SD0-G4-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VBUS05B1-SD0-G4-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VBUS05B1-SD0-G4-08 reliable?
The price and inventory of VBUS05B1-SD0-G4-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VBUS05B1-SD0-G4-08 is usually 5 days.
3.What payment methods are accepted for VBUS05B1-SD0-G4-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VBUS05B1-SD0-G4-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VBUS05B1-SD0-G4-08?
VBUS05B1-SD0-G4-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VBUS05B1-SD0-G4-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VBUS05B1-SD0-G4-08?
For technical support, including VBUS05B1-SD0-G4-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VBUS05B1-SD0-G4-08 requirements.
6.How does Aetrix verify that VBUS05B1-SD0-G4-08 is sourced from the original manufacturer or authorized distributors?
All VBUS05B1-SD0-G4-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VBUS05B1-SD0-G4-08 meets industry standards.
7.What is the process for return or replacement of VBUS05B1-SD0-G4-08?
All VBUS05B1-SD0-G4-08 units undergo pre-shipment inspection (PSI). If there is an issue with VBUS05B1-SD0-G4-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VBUS05B1-SD0-G4-08 part is unused and in its original packaging.
Return procedure for VBUS05B1-SD0-G4-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VBUS05B1-SD0-G4-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
