My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VCUT03B1-DD1-G-08
- Part No.:
- VCUT03B1-DD1-G-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- SOD-882
- Datasheet:
-
VCUT03B1-DD1-G-08.pdf
- Description:
- TVS DIODE 3.5V 11.5V LLP1006-2M
- Quantity:
- Payment:
- Shipping:
Inventory:12,210
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VCUT03B1-DD1-G-08 from Vishay Semiconductors is a bidirectional symmetrical (BiSy) single-line ESD-protection diode in the LLP1006-2M package, rated for ±3.5 V working voltage, 12.5 pF load capacitance, <0.1 μA leakage current, and ±18 kV contact/±20 kV air ESD immunity per IEC 61000-4-2 - deployed on high-speed USB 2.0, HDMI, and audio data lines.
For engineers reviewing the VCUT03B1-DD1-G-08 datasheet, VCUT03B1-DD1-G-08 pinout, VCUT03B1-DD1-G-08 application, or VCUT03B1-DD1-G-08 equivalent, key selection criteria include clamping voltage at 3.5 A (≤11.5 V), ultra-low package height (<0.4 mm), MSL level 1 solderability, and BiSy symmetry enabling single-device protection of bidirectional signal paths without polarity concerns.
Technical Context
The VCUT03B1-DD1-G-08 implements a symmetrical Zener-based clamping structure with matched forward/reverse breakdown characteristics (VBR = 5.8–7.5 V), enabling identical positive/negative transient suppression. Its low-inductance LLP1006-2M layout minimizes overshoot during sub-nanosecond ESD events.
It operates within –40 °C to +125 °C junction temperature range and supports peak pulse power of 40 W (8/20 μs, IEC 61000-4-5). Clamping voltage rises predictably with current: 7.8–9.0 V at 1 A, 9.5–11.5 V at 3.5 A - critical for preserving signal integrity in 3.3 V logic interfaces.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Working Voltage | ±3.5 V - defines maximum continuous signal swing before conduction; compatible with 3.3 V I/O rails. |
| Clamping Voltage @ 3.5 A | ≤11.5 V - limits transient overvoltage seen by downstream ICs during worst-case IEC 61000-4-5 surge. |
| Load Capacitance | 12.5 pF @ 0 V - ensures minimal signal distortion on USB 2.0 (480 Mbps) and audio differential pairs. |
| ESD Immunity | ±18 kV contact / ±20 kV air - exceeds IEC 61000-4-2 Level 4 for robust system-level ESD compliance. |
| Leakage Current | <0.1 μA @ 3.5 V - prevents DC loading on high-impedance sensor or reference lines. |
| Package Height | <0.4 mm - enables use in ultra-thin mobile devices and stacked PCB assemblies. |
| Moisture Sensitivity | MSL level 1 - allows unlimited floor life and standard reflow without baking. |
Pinout & Package
VCUT03B1-DD1-G-08 is housed in the LLP1006-2M surface-mount package (1.05 mm × 0.65 mm × <0.4 mm), featuring two terminals with pin 1 marked by a bar. The package uses NiPdAu (e4) plating to prevent whisker growth and supports vision-based solder inspection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode/Cathode (symmetrical) | BiSy terminal - interchangeable with Pin 2; connects to protected signal line. |
| Pin 2 | Anode/Cathode (symmetrical) | BiSy terminal - interchangeable with Pin 1; connects to system ground. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional Symmetry (BiSy) | Identical clamping behavior for ± transients - eliminates polarity marking and routing constraints. |
| Ultra-Low Capacitance | 12.5 pF typical - preserves signal rise/fall times on >100 MHz data lines without added jitter. |
| Low-Inductance Layout | Short internal leads in LLP1006-2M - reduces voltage overshoot during <1 ns ESD rise time events. |
| No X-ray Inspection Required | Visible solder joint geometry - enables automated optical inspection (AOI) for high-volume manufacturing traceability. |
| Pb-Free & RoHS Compliant | NiPdAu (e4) termination - meets JEDEC J-STD-609 and avoids tin whisker risk in long-life applications. |
Applications
| USB 2.0 Data Lines | HDMI TMDS Channels |
|---|---|
Use Scenario: Protecting D+ and D− pins of USB 2.0 transceivers against ESD events during cable insertion or handling. IC Role / Device Role / Timing Role: Signal-line ESD clamp placed directly at connector, shunting transients to ground before reaching PHY. Use Value: 12.5 pF capacitance avoids degrading 480 Mbps eye diagram; ±18 kV rating ensures pass/fail compliance in system-level IEC 61000-4-2 testing. | Use Scenario: Safeguarding TMDS clock and data channels in portable HDMI sources (e.g., tablets, dongles) exposed to user-touch ESD. IC Role / Device Role / Timing Role: Low-capacitance bidirectional protector between source driver and HDMI connector. Use Value: Symmetrical clamping maintains differential signal balance; <0.4 mm height fits tight space behind micro-HDMI connectors. |
| Smartphone Audio Jacks | Industrial Sensor Interfaces |
Use Scenario: ESD protection for analog audio paths (MIC, HP_L/R) in smartphones where jack insertion generates ±8 kV discharges. IC Role / Device Role / Timing Role: Ground-referenced clamp on unidirectional analog signal lines with DC bias. Use Value: <0.1 μA leakage prevents DC offset shift in amplifier input stages; ±3.5 V working range accommodates typical audio signal swings. | Use Scenario: Protecting RS-485 or CAN FD transceiver I/O pins in factory automation nodes subject to cable-discharge events. IC Role / Device Role / Timing Role: Secondary-level ESD suppressor mounted at field-wire entry point, upstream of transceiver. Use Value: 40 W peak pulse power handles multi-shot surges; MSL level 1 supports reflow after conformal coating. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ3.3A-E3/57T | Unidirectional, DO-214AC package (4.5 mm × 3.9 mm), 150 pF capacitance, 100 W peak power | Requires polarity-aware layout; unsuitable for high-speed data due to high capacitance | Select only for low-frequency power/signal lines where size and speed are not constraints. |
| TPD2E001DRYR | Two-channel, SOT-553 package, 11 pF per line, ±12 kV contact ESD rating, integrated 5 V VCC clamp | Offers dual-line protection in same footprint; lower ESD rating but includes supply-rail protection | Prefer when protecting both signal and VCC on compact interfaces like I²C or GPIO banks. |
Compared with SMAJ3.3A-E3/57T and TPD2E001DRYR, VCUT03B1-DD1-G-08 delivers superior high-speed interface compatibility via its 12.5 pF capacitance and BiSy symmetry, while occupying <5% of the board area of the SMAJ device - making it optimal for space-constrained, multi-gigabit-per-second signal paths.
Availability
VCUT03B1-DD1-G-08 is available at Aetrix Electronics and suitable for USB 2.0 interface protection, HDMI TMDS channel safeguarding, and smartphone audio jack ESD mitigation requiring stable component supply across consumer electronics, industrial HMI, and automotive infotainment programs.
Supply support for VCUT03B1-DD1-G-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in power management, sensing, and circuit protection components with emphasis on reliability and precision.
The VCUT03B1-DD1-G-08 belongs to Vishay's BiSy ESD protection family, engineered specifically for high-density, high-speed digital interfaces where minimal capacitance, symmetrical clamping, and ultra-small footprint are mandatory design requirements.
FAQ
What is the maximum operating temperature range for VCUT03B1-DD1-G-08?
The VCUT03B1-DD1-G-08 has a specified junction temperature range of –40 °C to +125 °C and storage temperature range of –55 °C to +150 °C. This wide thermal envelope supports deployment in automotive cabin modules, industrial PLCs, and outdoor consumer devices where ambient conditions exceed standard commercial limits. The LLP1006-2M package's low thermal resistance enables reliable operation at full rated power across this range.
Does VCUT03B1-DD1-G-08 require orientation-specific placement on the PCB?
No - VCUT03B1-DD1-G-08 is a bidirectional symmetrical (BiSy) device with identical electrical behavior in either direction, so Pin 1 and Pin 2 are functionally interchangeable. The bar marking indicates Pin 1 solely for traceability and assembly verification; swapping terminals does not affect ESD performance or signal integrity. This simplifies layout and eliminates polarity-related assembly errors.
What is the clamping voltage of VCUT03B1-DD1-G-08 at 1 A and 3.5 A peak pulse current?
The VCUT03B1-DD1-G-08 exhibits a typical clamping voltage of 7.8–9.0 V at 1 A and 9.5–11.5 V at 3.5 A (IEC 61000-4-5, 8/20 μs waveform). These values are measured across the device under standardized surge conditions and define the maximum overvoltage imposed on protected circuitry - critical for ensuring downstream 3.3 V logic ICs remain within absolute maximum ratings during transient events.
Can VCUT03B1-DD1-G-08 be used for protecting 5 V logic interfaces?
No - VCUT03B1-DD1-G-08 has a reverse stand-off voltage (VRWM) of 3.5 V, meaning it begins conducting significantly above that threshold. Using it on a 5 V rail would cause excessive leakage and potential malfunction. For 5 V interfaces, Vishay offers variants such as VCUT05B1-DD1 (VRWM = 5.0 V); always match the stand-off voltage to the system's steady-state signal voltage.
Is VCUT03B1-DD1-G-08 compliant with lead-free soldering standards?
Yes - VCUT03B1-DD1-G-08 features NiPdAu (e4) terminal plating and is qualified for peak reflow temperatures up to 260 °C per J-STD-020. It carries MSL level 1 rating, permitting unlimited exposure to ambient conditions prior to soldering. The device is RoHS-compliant and fully compatible with standard Pb-free reflow profiles used in modern electronics assembly.
VCUT03B1-DD1-G-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- SOD-882
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 3.5V (Max)
- Voltage - Breakdown (Min):
- 5.8V
- Voltage - Clamping (Max) @ Ipp:
- 11.5V
- Current - Peak Pulse (10/1000µs):
- 3.5A (8/20µs)
- Power - Peak Pulse:
- 40W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 12.5pF @ 1MHz
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- LLP1006-2M
VCUT03B1-DD1-G-08 FAQ
1.How can I place an order for VCUT03B1-DD1-G-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VCUT03B1-DD1-G-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VCUT03B1-DD1-G-08 reliable?
The price and inventory of VCUT03B1-DD1-G-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VCUT03B1-DD1-G-08 is usually 5 days.
3.What payment methods are accepted for VCUT03B1-DD1-G-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VCUT03B1-DD1-G-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VCUT03B1-DD1-G-08?
VCUT03B1-DD1-G-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VCUT03B1-DD1-G-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VCUT03B1-DD1-G-08?
For technical support, including VCUT03B1-DD1-G-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VCUT03B1-DD1-G-08 requirements.
6.How does Aetrix verify that VCUT03B1-DD1-G-08 is sourced from the original manufacturer or authorized distributors?
All VCUT03B1-DD1-G-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VCUT03B1-DD1-G-08 meets industry standards.
7.What is the process for return or replacement of VCUT03B1-DD1-G-08?
All VCUT03B1-DD1-G-08 units undergo pre-shipment inspection (PSI). If there is an issue with VCUT03B1-DD1-G-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VCUT03B1-DD1-G-08 part is unused and in its original packaging.
Return procedure for VCUT03B1-DD1-G-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VCUT03B1-DD1-G-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
