My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VCUT10G1-SD0-G4-08
- Part No.:
- VCUT10G1-SD0-G4-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- 0201 (0603 Metric)
- Datasheet:
-
VCUT10G1-SD0-G4-08.pdf
- Description:
- TVS DIODE 10VWM 18VC CLP0603
- Quantity:
- Payment:
- Shipping:
Inventory:7,517
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VCUT10G1-SD0-G4-08 from Vishay Semiconductors is a bidirectional symmetrical (BiSy) single-line ESD-protection diode in CLP0603-2L silicon package, rated for ±10 V working range, 7.7 pF typical capacitance at 0 V, <0.05 μA leakage current, and ±24 kV IEC 61000-4-2 contact/air discharge immunity - deployed on high-speed USB 2.0, HDMI, and automotive infotainment data lines.
For engineers reviewing the VCUT10G1-SD0-G4-08 datasheet, VCUT10G1-SD0-G4-08 pinout, VCUT10G1-SD0-G4-08 application, or VCUT10G1-SD0-G4-08 equivalent, key selection criteria include low clamping voltage (13–15 V at 1 A), ultra-low package height (<0.3 mm), AEC-Q101 qualification availability, and minimal parasitic capacitance for signal integrity preservation in compact portable electronics.
Technical Context
The VCUT10G1-SD0-G4-08 implements a symmetric silicon avalanche clamp structure with no internal biasing circuitry, enabling true bidirectional transient suppression between signal line and ground. Its CLP0603-2L footprint delivers sub-0.3 mm height and <0.12 mg mass, minimizing parasitic inductance to reduce overshoot during fast ESD events.
It operates within -55 °C to +150 °C junction temperature range and meets IEC 61000-4-5 (8/20 μs, 4 A peak pulse current, 72 W peak power) and IEC 61000-4-2 (±24 kV) standards. Dynamic resistance is 0.29 Ω per TLP measurement at 100 ns pulse width.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Working Voltage Range | ±10 V - defines maximum continuous DC or AC signal swing before leakage rises significantly. |
| Clamping Voltage (1 A) | 13–15 V - limits transient overvoltage seen by downstream ICs during ESD strike. |
| Capacitance (0 V, 1 MHz) | 7.7 pF typ. - preserves signal integrity on USB 2.0 (480 Mbps) and HDMI 1.4 data lanes. |
| Leakage Current | <0.05 μA at 10 V - avoids loading of high-impedance sensor or analog front-end circuits. |
| ESD Rating | ±24 kV contact / ±24 kV air per IEC 61000-4-2 - exceeds Level 4 immunity requirements. |
| Peak Pulse Current | 4 A per IEC 61000-4-5 (8/20 μs) - handles surge energy without thermal failure. |
| Package | CLP0603-2L - 0.6 mm × 0.3 mm × 0.27 mm footprint compatible with automated SMT assembly. |
Pinout & Package
VCUT10G1-SD0-G4-08 uses a 2-terminal CLP0603-2L surface-mount package with symmetrical layout: Pin 1 and Pin 2 are identical, non-polarized terminals connected across the protected line and ground.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode/Cathode (symmetrical) | Connects to signal/data line; interchangeable with Pin 2 due to bidirectional design. |
| Pin 2 | Anode/Cathode (symmetrical) | Connects to system ground; polarity agnostic - no orientation dependency in layout. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional Symmetrical Clamping | Enables single-device protection of AC-coupled or differential lines without polarity concerns. |
| Ultra-Low Capacitance (7.7 pF) | Maintains signal rise/fall times & eye diagram integrity on 480 Mbps USB 2.0 interfaces. |
| Sub-0.3 mm Package Height | Supports ultra-thin mobile designs and co-placement with fine-pitch connectors (e.g., micro-USB). |
| AEC-Q101 Qualification Option | Validated for automotive infotainment and ADAS sensor interface applications requiring reliability certification. |
| Low Dynamic Resistance (0.29 Ω) | Reduces clamping voltage overshoot under fast TLP pulses, improving protection margin. |
Applications
| USB 2.0 Data Lines | HDMI 1.4 TMDS Channels |
|---|---|
|
Use Scenario: ESD protection on D+ and D− lines of smartphone USB ports exposed to user handling. IC Role / Device Role: Bidirectional transient voltage suppressor placed between connector and USB transceiver IC. Use Value: 7.7 pF capacitance avoids signal degradation at 480 Mbps; ±24 kV rating prevents latch-up or damage during plug/unplug events. |
Use Scenario: Protection of TMDS clock and data pairs in automotive head-unit HDMI outputs. IC Role / Device Role: Line-to-ground ESD clamp on each differential pair, mounted adjacent to HDMI connector. Use Value: Low 0.29 Ω dynamic resistance minimizes clamping overshoot, preserving TMDS eye opening and jitter budget. |
| Automotive Infotainment Touchscreen | Industrial Sensor Interface |
|
Use Scenario: I²C bus protection for capacitive touchscreen controllers in dash-mounted displays. IC Role / Device Role: Single-line BiSy clamp on SDA/SCL lines, leveraging ±10 V working range matching I²C logic levels. Use Value: <0.05 μA leakage ensures no measurable impact on I²C pull-up resistor network or timing. |
Use Scenario: RS-485 transceiver port protection in factory automation gateways. IC Role / Device Role: Line-to-ground ESD suppressor on A/B differential inputs, operating within ±10 V common-mode window. Use Value: 4 A IEC 61000-4-5 surge rating withstands induced surges from nearby motor switching in industrial environments. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD-protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD9X5.0ST5G | Unidirectional; 5.0 V VRWM; 15 pF capacitance; ±17 kV ESD rating | Requires correct polarity placement; higher capacitance limits use on >100 Mbps interfaces | Select only when unidirectional signal path and lower cost outweigh need for bidirectionality and low capacitance. |
| TPD2E001DRYR | Two-channel array; 5.5 V VRWM; 11 pF per channel; ±8 kV IEC 61000-4-2 | Offers dual-line protection in same footprint but lower ESD rating and higher capacitance | Prefer for space-constrained dual-signal paths where ±8 kV suffices and board area is premium. |
Compared with ESD9X5.0ST5G and TPD2E001DRYR, the VCUT10G1-SD0-G4-08 provides superior bidirectional immunity (±24 kV), lower capacitance (7.7 pF vs. ≥11 pF), and symmetric operation - making it optimal for high-speed, polarity-agnostic data lines where signal fidelity and robustness are jointly critical.
Availability
VCUT10G1-SD0-G4-08 is available at Aetrix Electronics and suitable for USB 2.0 interface protection, automotive infotainment systems, and industrial RS-485 node designs requiring stable component supply, RoHS-compliant lead-free terminations, and green packaging.
Supply support for VCUT10G1-SD0-G4-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in diodes, MOSFETs, optoelectronics, and protection devices with emphasis on reliability, miniaturization, and automotive-grade qualification.
The VCUT10G1-SD0-G4-08 belongs to Vishay's BiSy ESD protection family, engineered specifically for high-density, high-speed digital interfaces where ultra-low capacitance, sub-millimeter size, and AEC-Q101 readiness are mandatory.
FAQ
What is the exact package type and dimensions of VCUT10G1-SD0-G4-08?
The VCUT10G1-SD0-G4-08 uses the CLP0603-2L Gen2 package: 0.60 mm × 0.30 mm × 0.27 mm (L × W × H), with 0.24 mm terminal pitch and gold-plated Ni leads (e4 plating). This ultra-compact footprint is optimized for fine-pitch SMT assembly and matches JEDEC STD-020 reflow profiles up to 260 °C peak.
Does VCUT10G1-SD0-G4-08 require polarity-aware PCB layout?
No - the VCUT10G1-SD0-G4-08 is a truly bidirectional symmetrical (BiSy) device. Its two terminals are electrically identical; either pin may connect to signal or ground without affecting clamping behavior. This eliminates orientation errors during placement and simplifies routing on dense PCBs.
What is the clamping voltage of VCUT10G1-SD0-G4-08 under real-world ESD stress?
Under IEC 61000-4-2 1 A TLP conditions, VCUT10G1-SD0-G4-08 clamps at 13–15 V; at its 4 A IEC 61000-4-5 peak pulse rating, clamping is 16–18 V. These values are measured with 100 ns TLP pulses and reflect actual voltage seen by protected ICs - critical for ensuring downstream logic remains within safe operating area.
Is VCUT10G1-SD0-G4-08 qualified for automotive applications?
The base VCUT10G1-SD0 variant is AEC-Q101 qualified (as noted in ordering codes with "H" suffix); VCUT10G1-SD0-G4-08 itself is RoHS-compliant, green, and gold-plated, and shares identical die and package construction. For certified automotive use, specify VCUT10G1-SD0HG4-08 - the AEC-Q101 qualified version of this part number.
How does the 7.7 pF capacitance of VCUT10G1-SD0-G4-08 affect USB 2.0 signal integrity?
At 7.7 pF (typ.) and 1 MHz, VCUT10G1-SD0-G4-08 introduces negligible impedance drop on USB 2.0 D+/D− lines - maintaining >90% eye opening at 480 Mbps and adding <0.5 ps of deterministic jitter. Measured insertion loss remains below -0.3 dB up to 500 MHz, confirming compatibility with full-speed USB compliance testing.
VCUT10G1-SD0-G4-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- 0201 (0603 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 10V (Max)
- Voltage - Breakdown (Min):
- 11V
- Voltage - Clamping (Max) @ Ipp:
- 18V
- Current - Peak Pulse (10/1000µs):
- 4A (8/20µs)
- Power - Peak Pulse:
- 72W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 7.7pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- CLP0603
VCUT10G1-SD0-G4-08 FAQ
1.How can I place an order for VCUT10G1-SD0-G4-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VCUT10G1-SD0-G4-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VCUT10G1-SD0-G4-08 reliable?
The price and inventory of VCUT10G1-SD0-G4-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VCUT10G1-SD0-G4-08 is usually 5 days.
3.What payment methods are accepted for VCUT10G1-SD0-G4-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VCUT10G1-SD0-G4-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VCUT10G1-SD0-G4-08?
VCUT10G1-SD0-G4-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VCUT10G1-SD0-G4-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VCUT10G1-SD0-G4-08?
For technical support, including VCUT10G1-SD0-G4-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VCUT10G1-SD0-G4-08 requirements.
6.How does Aetrix verify that VCUT10G1-SD0-G4-08 is sourced from the original manufacturer or authorized distributors?
All VCUT10G1-SD0-G4-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VCUT10G1-SD0-G4-08 meets industry standards.
7.What is the process for return or replacement of VCUT10G1-SD0-G4-08?
All VCUT10G1-SD0-G4-08 units undergo pre-shipment inspection (PSI). If there is an issue with VCUT10G1-SD0-G4-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VCUT10G1-SD0-G4-08 part is unused and in its original packaging.
Return procedure for VCUT10G1-SD0-G4-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VCUT10G1-SD0-G4-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
