My Inquiry
My Account
Vishay General Semiconductor - Diodes Division VCUT10G1-SD0HG4-08
- Part No.:
- VCUT10G1-SD0HG4-08
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- 0201 (0603 Metric)
- Datasheet:
-
VCUT10G1-SD0HG4-08.pdf
- Description:
- TVS DIODE 10VWM 18VC CLP0603
- Quantity:
- Payment:
- Shipping:
Inventory:5,325
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VCUT10G1-SD0HG4-08 from Vishay Semiconductors is a bidirectional symmetrical (BiSy) single-line ESD-protection diode in CLP0603-2L package, rated for ±10 V working range, 7.7 pF typical load capacitance, and ±24 kV IEC 61000-4-2 contact/air discharge immunity-designed for high-speed data lines in automotive infotainment interfaces.
For engineers reviewing the VCUT10G1-SD0HG4-08 datasheet, VCUT10G1-SD0HG4-08 pinout, VCUT10G1-SD0HG4-08 application, or VCUT10G1-SD0HG4-08 equivalent, key selection criteria include low leakage (<0.05 μA), dynamic resistance (0.29 Ω), clamping voltage at 4 A (≤18 V), and AEC-Q101 qualification status for automotive-grade reliability.
Technical Context
The VCUT10G1-SD0HG4-08 implements a silicon-based BiSy clamping architecture that symmetrically limits both positive and negative transients to ground without polarity biasing. Its CLP0603-2L footprint ensures minimal parasitic inductance, enabling sub-nanosecond response to ESD events per IEC 61000-4-2.
It operates within a junction temperature range of −55 °C to +150 °C and delivers stable clamping performance across reverse voltages up to 10 V, with verified TLP-derived dynamic resistance of 0.29 Ω and clamping voltage of 17.4 V at 16 A TLP current.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Working Range | ±10 V - defines maximum continuous signal swing before conduction begins; enables use on 3.3 V and 5 V data buses. |
| ESD Immunity | ±24 kV contact / ±24 kV air per IEC 61000-4-2 - meets highest industrial and automotive ESD robustness requirements. |
| Load Capacitance | 7.7 pF at 0 V (typ.) - preserves signal integrity on USB 2.0, HDMI DDC, and I²C lines without bandwidth degradation. |
| Reverse Leakage | <0.05 μA at 10 V - minimizes standby power loss and avoids false triggering in high-impedance sensor interfaces. |
| Clamping Voltage | 16–18 V at 4 A (8/20 μs) - limits transient overvoltage to safe levels for downstream 12 V-tolerant receivers. |
| Dynamic Resistance | 0.29 Ω (TLP, 100 ns) - ensures rapid voltage stabilization during fast-rising ESD pulses. |
| AEC-Q101 Qualified | Yes - validated for automotive applications including infotainment, ADAS camera links, and body control modules. |
Pinout & Package
Package: CLP0603-2L - ultra-compact surface-mount package measuring 0.6 mm × 0.3 mm × 0.27 mm (L × W × H), gold-plated Ni terminations (e4), lead (Pb)-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode (bidirectional) | Connected to protected signal line; symmetric structure means no polarity assignment required. |
| Pin 2 | Cathode (bidirectional) | Connected to system ground; completes low-inductance path for ESD current diversion. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional Symmetrical Clamping | Equal positive/negative clamping thresholds (VBR = 11–13 V) eliminate need for polarity-aware layout or external biasing. |
| Ultra-Low Capacitance | 7.7 pF typ. at 0 V enables placement on >100 MHz digital lines (e.g., MIPI D-PHY, I²C Fast Mode Plus) without signal distortion. |
| Sub-0.3 mm Height | 0.27 mm max profile supports co-placement with fine-pitch connectors and under-shielded RF modules. |
| Low Dynamic Resistance | 0.29 Ω ensures <1 V overshoot margin during 16 A TLP stress, critical for protecting 1.8 V/3.3 V interface ICs. |
| AEC-Q101 Qualification | Validated for automotive temperature cycling, humidity testing, and mechanical shock-supports Tier-1 BOM inclusion. |
Applications
| Automotive Infotainment Display Link | USB 2.0 Data Line Protection |
|---|---|
Use Scenario: ESD protection on LVDS or FPD-Link III video data lanes between head unit and TFT display. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed inline between serializer/deserializer ICs and connector. Use Value: Prevents latch-up or damage to display timing controller ICs during assembly handling or field electrostatic discharge events. |
Use Scenario: Protection of D+ and D− lines in automotive USB host ports exposed to user-accessible connectors. IC Role / Device Role / Timing Role: Low-capacitance shunt clamp maintaining USB 2.0 eye diagram integrity while diverting ESD energy to chassis ground. Use Value: Maintains full-speed (480 Mbps) compliance with <7.7 pF loading and withstands repeated ±24 kV contact discharges per ISO 10605. |
| I²C Sensor Bus Protection | ADAS Camera Serial Interface |
Use Scenario: ESD safeguard on I²C SDA/SCL lines connecting MCU to ambient light, temperature, or proximity sensors. IC Role / Device Role / Timing Role: High-impedance standby protector that activates only during transients, preserving bus DC characteristics. Use Value: Enables reliable multi-drop sensor networks with <0.05 μA leakage, avoiding false ACK/NACK errors due to leakage-induced voltage drop. |
Use Scenario: Transient suppression on GMSL or APIX2 serial video links between radar/camera ECUs and domain controllers. IC Role / Device Role / Timing Role: Signal-line ESD clamp with matched differential impedance and minimal skew between paired lines. Use Value: Supports >3 Gbps serial video transmission by limiting capacitive mismatch to <0.5 pF between differential pairs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD-protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SEMTECH RCLAMP0524P.TCT | Higher capacitance (12 pF typ.), same ±24 kV rating, 0.65 mm height | Less suitable for >100 MHz interfaces; better for lower-speed CAN or LIN lines | Prefer when board space allows taller profile and higher capacitance is acceptable |
| LITTELFUSE SP1003-01WTG | Lower clamping voltage (12 V at 1 A), but only ±15 kV ESD rating, 0.5 mm height | Not AEC-Q101 qualified; limited to consumer-grade USB or audio interfaces | Choose only for non-automotive designs where cost is prioritized over automotive qualification |
Compared with RCLAMP0524P.TCT and SP1003-01WTG, the VCUT10G1-SD0HG4-08 uniquely combines AEC-Q101 qualification, 0.27 mm height, and 7.7 pF capacitance-making it the only option among the three qualified for space-constrained, high-speed automotive serial links requiring full ±24 kV immunity.
Availability
VCUT10G1-SD0HG4-08 is available at Aetrix Electronics and suitable for automotive infotainment systems, USB 2.0 peripheral interfaces, and I²C sensor networks requiring stable component supply across extended production lifecycles.
Supply support for VCUT10G1-SD0HG4-08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors is a global leader in discrete semiconductors, specializing in high-reliability diodes, MOSFETs, optoelectronics, and protection devices for automotive, industrial, and computing markets.
The VCUT10G1-SD0HG4-08 belongs to Vishay's BiSy ESD protection family, engineered specifically for high-speed, space-constrained automotive data interfaces demanding AEC-Q101 validation and sub-10 pF loading.
FAQ
What is the maximum operating temperature for VCUT10G1-SD0HG4-08?
The VCUT10G1-SD0HG4-08 has a specified junction temperature range of −55 °C to +150 °C, making it suitable for under-hood automotive environments and industrial control units where thermal extremes occur. This rating is validated per AEC-Q101 stress tests and confirmed in the absolute maximum ratings table of the official Vishay datasheet (Doc. #86316, Rev. 1.3).
Does VCUT10G1-SD0HG4-08 require polarity-aware PCB layout?
No - the VCUT10G1-SD0HG4-08 is a bidirectional symmetrical (BiSy) device with identical clamping behavior for positive and negative transients, so PCB layout does not require orientation marking or directional routing. Pin 1 and Pin 2 are functionally interchangeable in circuit design, as confirmed by its symmetrical VBR (11–13 V) and VC specifications in the electrical characteristics table.
Is VCUT10G1-SD0HG4-08 compatible with lead-free reflow soldering?
Yes - the VCUT10G1-SD0HG4-08 is qualified for lead-free reflow per JEDEC® STD-020, with a peak temperature limit of 260 °C. Its CLP0603-2L package and e4 (gold-plated Ni) terminations ensure reliable wetting and intermetallic formation during standard Pb-free profiles, as documented in the "Soldering Conditions" section of Vishay's package data sheet.
What is the clamping voltage of VCUT10G1-SD0HG4-08 at 4 A ESD pulse?
The VCUT10G1-SD0HG4-08 clamps to ≤18 V at 4 A (8/20 μs pulse), with a typical value of 16 V. This is measured per IEC 61000-4-5 and listed in the Absolute Maximum Ratings table. The low clamping level protects downstream 12 V-tolerant receivers while maintaining margin against logic-level damage thresholds.
How does the 7.7 pF capacitance of VCUT10G1-SD0HG4-08 affect USB 2.0 signal integrity?
The 7.7 pF typical load capacitance of VCUT10G1-SD0HG4-08 introduces negligible insertion loss on USB 2.0 full-speed (12 Mbps) and high-speed (480 Mbps) signals, preserving eye diagram opening and meeting USB-IF impedance tolerance requirements. Measured data in Vishay's Fig. 4 confirms capacitance drops to 5.4 pF at 5 V bias-further reducing AC loading during active signaling.
VCUT10G1-SD0HG4-08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- 0201 (0603 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 10V (Max)
- Voltage - Breakdown (Min):
- 11V
- Voltage - Clamping (Max) @ Ipp:
- 18V
- Current - Peak Pulse (10/1000µs):
- 4A (8/20µs)
- Power - Peak Pulse:
- 72W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 7.7pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- CLP0603
VCUT10G1-SD0HG4-08 FAQ
1.How can I place an order for VCUT10G1-SD0HG4-08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VCUT10G1-SD0HG4-08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VCUT10G1-SD0HG4-08 reliable?
The price and inventory of VCUT10G1-SD0HG4-08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VCUT10G1-SD0HG4-08 is usually 5 days.
3.What payment methods are accepted for VCUT10G1-SD0HG4-08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VCUT10G1-SD0HG4-08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VCUT10G1-SD0HG4-08?
VCUT10G1-SD0HG4-08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VCUT10G1-SD0HG4-08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VCUT10G1-SD0HG4-08?
For technical support, including VCUT10G1-SD0HG4-08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VCUT10G1-SD0HG4-08 requirements.
6.How does Aetrix verify that VCUT10G1-SD0HG4-08 is sourced from the original manufacturer or authorized distributors?
All VCUT10G1-SD0HG4-08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VCUT10G1-SD0HG4-08 meets industry standards.
7.What is the process for return or replacement of VCUT10G1-SD0HG4-08?
All VCUT10G1-SD0HG4-08 units undergo pre-shipment inspection (PSI). If there is an issue with VCUT10G1-SD0HG4-08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VCUT10G1-SD0HG4-08 part is unused and in its original packaging.
Return procedure for VCUT10G1-SD0HG4-08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VCUT10G1-SD0HG4-08 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
