My Inquiry
My Account
STMicroelectronics Z00607MN 5AA4
- Part No.:
- Z00607MN 5AA4
- Manufacturer:
- STMicroelectronics
- Category:
- TRIACs
- Package:
- TO-261-4, TO-261AA
- Datasheet:
-
Z00607MN 5AA4.pdf
- Description:
- TRIAC SENS GATE 600V 0.8A SOT223
- Quantity:
- Payment:
- Shipping:
Inventory:1
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
Z00607MN 5AA4 from STMicroelectronics is a standard 0.8 A, 600 V RMS triac in SOT-223 package, designed for low-power AC switching with 5 mA gate trigger current, 1.5 V on-state voltage at 1.1 A, and 20 A/µs critical dI/dt rating. It enables direct microcontroller drive in home appliance controls such as electrovalves, small lamp dimmers, and fan speed regulators.
For engineers reviewing the Z00607MN 5AA4 datasheet, Z00607MN 5AA4 pinout, Z00607MN 5AA4 application, or Z00607MN 5AA4 equivalent, key selection criteria include verified gate sensitivity (IGT ≤ 5 mA), thermal resistance (Rth(j-t) = 25 °C/W), repetitive peak off-state voltage (VDRM = 600 V), and SOT-223 footprint compatibility with PCB layout constraints.
Technical Context
The Z00607MN operates as a bidirectional thyristor for phase-controlled AC power switching, supporting full-wave conduction across all four quadrants. Its gate triggering is specified at 5 mA maximum in Quadrants I, II, and III, and 7 mA in Quadrant IV, with holding current ≤ 5 mA and latching current ≤ 10 mA (Quadrants I/III/IV).
Thermal performance is defined by junction-to-tab resistance of 25 °C/W (AC), enabling 0.8 A RMS operation at Ttab = 85 °C. The device sustains non-repetitive surge currents up to 9.5 A (60 Hz, 16.7 ms) and fusing I²t of 0.45 A²s at 10 ms pulse width.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| IT(RMS) | 0.8 A RMS - supports continuous load current in compact SOT-223 packages without heatsink at tab temperature ≤ 85 °C |
| VDRM / VRRM | 600 V - blocks line voltage surges up to 600 V peak in 230 VAC mains applications |
| IGT (max) | 5 mA - allows direct drive from GPIO pins of most 3.3 V or 5 V microcontrollers without external amplification |
| dI/dt (critical) | 20 A/µs - ensures reliable turn-on under fast-rising load current transients, e.g., inductive fan motors |
| Rth(j-t) | 25 °C/W - defines thermal path efficiency from die to tab, critical for calculating safe operating area in PCB-mounted designs |
| VTM (max) | 1.5 V at 1.1 A - determines conduction loss and self-heating during steady-state operation |
| I²t (fusing) | 0.45 A²s - sets short-circuit withstand capability for fuse coordination and overcurrent protection design |
Pinout & Package
SOT-223 package with three terminals: A1 (MT1), A2 (MT2), and G (Gate), mounted via tab soldered to copper pour for thermal management. Tab is electrically connected to A2.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 (MT1) | Main Terminal 1 | AC load return path; referenced to A2 for gate trigger polarity and quadrant operation |
| A2 (MT2) | Main Terminal 2 | AC line input or high-side connection; electrically tied to metal tab for thermal conduction |
| G | Gate | Control electrode accepting low-current trigger pulses to initiate conduction in any quadrant |
Key Features
| Feature | Design Value |
|---|---|
| Low gate trigger current | IGT ≤ 5 mA enables direct MCU GPIO control without buffer stages or level shifters |
| High dI/dt immunity | 20 A/µs critical rate prevents false turn-off during fast load current rise, e.g., motor startup |
| Robust surge rating | 9.5 A non-repetitive surge (60 Hz, 16.7 ms) supports transient overload tolerance in appliance cycles |
| Lead-free & RoHS-compliant | ECOPACK®-qualified SOT-223 meets UL94 V0 flammability and environmental compliance requirements |
Applications
| Home Appliance Electrovalve Control | Fan Speed Regulation |
|---|---|
Use Scenario: On/off control of 230 VAC solenoid valves in washing machines and dishwashers. IC Role / Device Role / Timing Role: Bidirectional AC switch triggered by MCU PWM or logic-level pulse to energize/de-energize valve coil. Use Value: 5 mA IGT allows direct drive from STM32 GPIO; 600 V VDRM withstands mains transients; SOT-223 footprint simplifies PCB layout near valve connectors. | Use Scenario: Phase-angle dimming of universal motor fans in HVAC units and portable air purifiers. IC Role / Device Role / Timing Role: AC line commutated switch synchronized to zero-crossing detection for adjustable conduction angle. Use Value: 20 A/µs dI/dt rating prevents commutation failure during motor inrush; 0.8 A IT(RMS) matches typical fan load range. |
| Small Lamp Dimmer Module | Door Lock Actuator Driver |
Use Scenario: Compact dimmer circuit for 230 VAC incandescent or halogen lamps in smart lighting systems. IC Role / Device Role / Timing Role: Main AC switching element controlled by microcontroller-generated phase-shifted gate pulses. Use Value: 1.5 V VTM minimizes conduction loss and self-heating; TO-92/SOT-223 variants allow flexible mechanical integration into enclosure designs. | Use Scenario: Power switching for electromagnetic door locks in access control panels operating from 230 VAC supply. IC Role / Device Role / Timing Role: High-reliability AC switch delivering timed on-pulse to lock/unlock solenoid mechanism. Use Value: 0.45 A²s I²t rating coordinates with fast-blow fuse selection; 5 mA IGT ensures compatibility with isolated gate drivers in security-grade designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BT134-600E | 0.6 A IT(RMS), 600 V VDRM, 5 mA IGT, TO-92 only | Limited to lower current loads; no SOT-223 option; higher Rth(j-a) = 150 °C/W in TO-92 | Select when board space permits TO-92 and load current stays below 0.6 A RMS |
| MAC97A6 | 0.8 A IT(RMS), 600 V VDRM, 10 mA IGT, TO-92 only | Higher gate drive requirement; lacks SOT-223 variant; lower dI/dt = 10 A/µs | Choose only if existing TO-92 footprint and higher IGT margin are acceptable trade-offs |
Compared with BT134-600E and MAC97A6, the Z00607MN 5AA4 uniquely combines 0.8 A rating, 5 mA IGT, SOT-223 thermal performance (Rth(j-t) = 25 °C/W), and tape-and-reel packaging-making it optimal for automated assembly of space-constrained, microcontroller-driven AC control modules.
Availability
Z00607MN 5AA4 is available at Aetrix Electronics and suitable for home appliance electrovalve control, fan speed regulation, and small lamp dimmer modules requiring stable component supply and RoHS-compliant manufacturing.
Supply support for Z00607MN 5AA4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, digital, and mixed-signal ICs for industrial, automotive, and consumer markets.
The Z00607 series belongs to ST's standard triac product line, engineered specifically for cost-sensitive, low-power AC switching in white goods and building automation where reliability, gate sensitivity, and thermal efficiency are prioritized.
FAQ
What is the maximum junction temperature for continuous operation?
The Z00607MN 5AA4 has a maximum operating junction temperature of +110 °C, as confirmed in Table 1 of the official datasheet (DocID6629 Rev 9). This limit applies under rated RMS current conditions and must be respected to avoid thermal runaway or accelerated aging. Derating is required above ambient temperatures where tab or case temperature exceeds 85 °C for SOT-223 mounting.
Can this triac replace a BT136-600D in an existing design?
No-Z00607MN 5AA4 is not a drop-in replacement for BT136-600D. While both are 600 V triacs, BT136-600D supports 4 A IT(RMS) versus 0.8 A for Z00607MN, and its gate trigger current is 15 mA vs. 5 mA. Substitution would require verifying load current, thermal design, and gate drive capability; undersizing risks thermal failure or unreliable triggering.
Is the SOT-223 tab electrically connected, and to which terminal?
Yes-the metal tab of the Z00607MN 5AA4 in SOT-223 package is electrically connected to A2 (MT2), as shown in the pin diagram on page 1 of the datasheet. This connection must be considered during PCB layout to prevent unintended shorting; isolation from other nets is required unless A2 is intentionally tied to chassis ground or heat sink.
Does this part support snubberless operation in inductive loads?
The Z00607MN 5AA4 does not guarantee snubberless operation. Its (dV/dt)c rating is only 1.5 V/µs at Tj = 110 °C, which is insufficient for most un-snubbed inductive loads like motors or transformers. A properly sized RC snubber network is recommended to suppress voltage transients exceeding this threshold and prevent false triggering during commutation.
Z00607MN 5AA4 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- TO-261-4, TO-261AA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Triac Type:
- Logic - Sensitive Gate
- Voltage - Off State:
- 600 V
- Current - On State (It (RMS)) (Max):
- 800 mA
- Voltage - Gate Trigger (Vgt) (Max):
- 1.3 V
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- 9A, 9.5A
- Current - Gate Trigger (Igt) (Max):
- 5 mA
- Current - Hold (Ih) (Max):
- 5 mA
- Configuration:
- Single
- Operating Temperature:
- -40°C ~ 110°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-223
Z00607MN 5AA4 FAQ
1.How can I place an order for Z00607MN 5AA4 through Aetrix?
Please submit a Request for Quotation (RFQ) for Z00607MN 5AA4 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for Z00607MN 5AA4 reliable?
The price and inventory of Z00607MN 5AA4 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for Z00607MN 5AA4 is usually 5 days.
3.What payment methods are accepted for Z00607MN 5AA4?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for Z00607MN 5AA4 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for Z00607MN 5AA4?
Z00607MN 5AA4 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your Z00607MN 5AA4 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for Z00607MN 5AA4?
For technical support, including Z00607MN 5AA4 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your Z00607MN 5AA4 requirements.
6.How does Aetrix verify that Z00607MN 5AA4 is sourced from the original manufacturer or authorized distributors?
All Z00607MN 5AA4 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that Z00607MN 5AA4 meets industry standards.
7.What is the process for return or replacement of Z00607MN 5AA4?
All Z00607MN 5AA4 units undergo pre-shipment inspection (PSI). If there is an issue with Z00607MN 5AA4, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The Z00607MN 5AA4 part is unused and in its original packaging.
Return procedure for Z00607MN 5AA4:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
Z00607MN 5AA4 Tags
-
Z0103NN5AA4
STMicroelectronics
-
Z0107MNT1G
Littelfuse Inc.
-
Z0103MNT1G
Littelfuse Inc.
;;2.jpg)
-
T405-800B-TR
STMicroelectronics
-
T835-600B-TR
STMicroelectronics
.JPG)
-
2N6073BG
Littelfuse Inc.
-
2N6075BG
Littelfuse Inc.
-
BTA08-600CWRG
STMicroelectronics
-
T835H-6G-TR
STMicroelectronics
-
BTA16-800BRG
STMicroelectronics
-
T1210-800G-TR
STMicroelectronics
-
MAC4DHMT4G
Littelfuse Inc.
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
