Diodes Incorporated ZXGD3107N8TC
- Part No.:
- ZXGD3107N8TC
- Manufacturer:
- Diodes Incorporated
- Category:
- Gate Drivers
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
ZXGD3107N8TC.pdf
- Description:
- IC GATE DRVR LOW-SIDE 8SOIC
- Quantity:
- Payment:

- Shipping:

Inventory:4,879
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZXGD3107N8TC from Diodes Incorporated is a synchronous MOSFET controller in SO-8 package designed to replace Schottky diodes in isolated flyback and resonant converters. It implements proportional gate drive control with -10 mV turn-off threshold, 2 A peak source / 7 A peak sink gate current, and operates up to 500 kHz in both CrCM and CCM modes for high-efficiency AC-DC power supplies.
For engineers reviewing the ZXGD3107N8TC datasheet, ZXGD3107N8TC pinout, ZXGD3107N8TC application, or ZXGD3107N8TC equivalent, this device serves as a low-quiescent-current (1.79 mA typical) ideal rectifier driver optimized for PoE power devices, laptop adapters, and ATX server PSUs where body diode conduction loss reduction is critical.
Technical Context
The ZXGD3107N8TC uses a high-voltage differential amplifier to sense MOSFET drain-source voltage and trigger gate drive based on a programmable turn-off threshold (VT = -10 mV typical). Its proportional gate drive architecture dynamically adjusts VG in response to VDS, minimizing conduction loss while enabling zero-current turn-off.
It supports dual-mode operation (CrCM and CCM) with 70 ns turn-on propagation delay and 15 ns turn-off propagation delay. The controller's bias and reference currents (IBIAS = 0.56 mA, IREF = 1.23 mA at VCC = 10 V) set VT and gate drive strength, enabling precise optimization for specific MOSFET RDS(on) and switching frequency.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCC Range | 4.5 V to 40 V - Enables direct connection to converter output rails up to 40 V without external regulation. |
| VDRAIN Rating | 200 V - Supports high-voltage secondary-side synchronous rectification in 12–24 V output flyback designs. |
| Turn-off Threshold (VT) | -10 mV typical - Precisely triggers MOSFET turn-off before reverse current flows, minimizing body diode conduction time. |
| Gate Drive Current | 2 A source / 7 A sink - Sufficient to rapidly charge/discharge MOSFET gate capacitance for <100 ns switching transitions. |
| Quiescent Current (IQ) | 1.79 mA typical - Meets Eco-Design Directive standby power requirements for energy-efficient adapters. |
| Switching Frequency | Up to 500 kHz - Compatible with high-frequency resonant topologies used in compact telecom and computing PSUs. |
| Operating Temperature | -40 °C to +150 °C - Rated for continuous operation in thermally demanding server and industrial power environments. |
Pinout & Package
Package: SO-8 (Surface-mount, 1.27 mm pitch, 4.90 mm × 6.00 mm body, 1.45 mm height, RoHS-compliant matte tin terminals).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 VCC | Power supply input | Accepts 4.5–40 V; must be decoupled with 1 µF X7R ceramic capacitor close to pin for stable gate drive. |
| 2, 6 DNC | Do not connect | Internally unused; must remain floating-no PCB trace or solder mask opening required. |
| 3 BIAS | Bias current input | Sinks 0.56 mA (at VCC = 10 V) via RBIAS resistor to set gate source current and VT sensitivity. |
| 4 DRAIN | High-side drain voltage sense | Direct connection to MOSFET drain; trace length ≤10 mm to avoid false triggering from ringing. |
| 5 REF | Reference current input | Sinks 1.23 mA (at VCC = 10 V) via RREF resistor to define turn-off threshold and gate sink current. |
| 7 GND | Ground reference | Common return for internal HV amplifier and gate driver; shortest possible PCB path to MOSFET source. |
| 8 GATE | Gate drive output | Sources/sinks up to 2 A/7 A; connects directly to MOSFET gate with series resistor for dV/dt control. |
Key Features
| Feature | Design Value |
|---|---|
| Proportional gate drive | VG scales linearly with VDS during conduction, maintaining MOSFET enhancement while minimizing VF drop vs. diode replacement. |
| Ultra-low quiescent current | 1.79 mA typical enables <30 mW no-load consumption in 12 V/5 A adapter designs meeting Level VI efficiency standards. |
| Programmable turn-off threshold | VT set to -10 mV via external RBIAS/RREF resistors-adjustable for MOSFETs with varying RDS(on) and layout parasitics. |
| High-speed switching support | 70 ns tD(RISE) and 15 ns tD(FALL) enable reliable operation at 500 kHz in CrCM flyback and LLC resonant converters. |
| Wide VCC range | 4.5 V minimum allows use with logic-level MOSFETs; 40 V maximum permits direct tie to 24 V or 36 V output rails. |
Applications
| AC-DC Adaptors | Set-Top Boxes |
|---|---|
|
Use Scenario: 12 V/3 A offline flyback adaptor for consumer electronics with <50 mW standby requirement. IC Role / Device Role / Timing Role: Synchronous rectifier controller replacing 40 V Schottky diode; senses MOSFET drain voltage to enable zero-current turn-off. Use Value: Reduces secondary-side conduction loss by >40% versus diode, improving full-load efficiency from 85% to 89% and enabling DoE Level VI compliance. |
Use Scenario: 19 V/2.1 A PoE-powered STB power supply operating in CrCM with 100 kHz switching. IC Role / Device Role / Timing Role: Gate driver for 30 V N-channel MOSFET; uses proportional control to maintain enhancement during magnetizing current decay. Use Value: Eliminates 0.45 W body diode loss at 2 A load, reducing thermal stress on secondary-side PCB and enabling smaller heatsink. |
| Telecoms PSU | Laptop Adaptors |
|
Use Scenario: 54 V input, 12 V/10 A half-bridge LLC resonant PSU for telecom shelf power. IC Role / Device Role / Timing Role: High-voltage synchronous rectifier controller driving paralleled MOSFETs; tolerates 200 V drain transients. Use Value: Achieves 95.2% peak efficiency by suppressing body diode conduction during dead-time intervals, reducing secondary-side temperature rise by 12 °C. |
Use Scenario: 20 V/4.5 A GaN-based flyback adaptor with 500 kHz switching and 15 mΩ MOSFET. IC Role / Device Role / Timing Role: Fast-turnoff synchronous controller with 15 ns propagation delay; minimizes reverse recovery overlap loss. Use Value: Enables >94% efficiency at 40% load and <75 mW no-load consumption-critical for EU CoC Tier 2 certification. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar synchronous rectifier controller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NCP4307DR2G | Fixed -20 mV turn-off threshold; no external resistor programming; 1.5 A/4 A gate drive. | Less flexible VT tuning for low-RDS(on) MOSFETs; lower peak current limits gate charge speed at >300 kHz. | Select when design uses standard 20–30 V MOSFETs and requires minimal BOM count-no RREF/RBIAS needed. |
| Vishay SiHP2110 | Integrated MOSFET + controller in PowerPAK SO-8; 40 V VDS; no external sense pin. | Not a controller-only solution-requires redesign of secondary-side layout; limited to ≤12 V output applications. | Choose only for space-constrained 5–12 V adapters where integrated solution reduces component count and layout complexity. |
Compared with NCP4307DR2G and SiHP2110, the ZXGD3107N8TC offers programmable turn-off threshold and higher gate drive current, enabling superior efficiency optimization across diverse MOSFET RDS(on) values and switching frequencies up to 500 kHz-critical for high-density PoE and server PSU designs.
Availability
ZXGD3107N8TC is available at Aetrix Electronics and suitable for AC-DC adaptors, telecom power supplies, and laptop adapters requiring stable component supply, long-term lifecycle support, and RoHS-compliant sourcing.
Supply support for ZXGD3107N8TC includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-efficiency power management solutions for consumer, industrial, and communications markets.
The ZXGD3107N8TC belongs to Diodes' synchronous rectifier controller product line, engineered specifically to replace Schottky diodes in isolated DC-DC converters-targeting efficiency gains in compact, high-frequency, low-noise power supplies.
FAQ
What is the recommended external resistor configuration for VCC = 12 V?
For VCC = 12 V, Diodes specifies RBIAS = 24 kΩ and RREF = 9.6 kΩ to achieve the nominal -10 mV turn-off threshold. These values source 0.56 mA into BIAS and 1.23 mA into REF, ensuring optimal gate drive strength and timing accuracy per DS37887 Rev. 2 Section 8.1.
Can ZXGD3107N8TC drive multiple parallel MOSFETs?
Yes-the GATE pin delivers up to 7 A peak sink current and 2 A peak source current, sufficient to drive two 30 V/5 mΩ MOSFETs (total Qg ≈ 60 nC) at 300 kHz with <20 ns rise/fall times. Layout must minimize shared gate loop inductance and use individual gate resistors.
How does the controller handle drain voltage ringing during primary-side MOSFET turn-off?
The ZXGD3107N8TC is susceptible to false triggering from drain ringing; Diodes recommends damping the primary snubber with an R-C network (e.g., 10 Ω + 100 pF) across the snubber diode, as shown in Figure 5 of DS37887, to suppress oscillations reflected to the secondary side.
Is ZXGD3107N8TC compatible with continuous conduction mode (CCM) flyback converters?
Yes-DS37887 explicitly confirms CCM operation support. In CCM, the controller maintains MOSFET enhancement throughout the entire secondary conduction period using proportional gate drive, reducing average VDS to <50 mV and eliminating body diode forward voltage drop entirely.
ZXGD3107N8TC Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Driven Configuration:
- Low-Side
- Channel Type:
- Single
- Number of Drivers:
- 1
- Gate Type:
- N-Channel MOSFET
- Voltage - Supply:
- 40V (Max)
- Logic Voltage - VIL, VIH:
- -
- Current - Peak Output (Source, Sink):
- 2A, 7A
- Input Type:
- Non-Inverting
- High Side Voltage - Max (Bootstrap):
- -
- Rise / Fall Time (Typ):
- 175ns, 20ns
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SO
ZXGD3107N8TC FAQ
1.How can I place an order for ZXGD3107N8TC through Aetrix?
Please submit a Request for Quotation (RFQ) for ZXGD3107N8TC on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZXGD3107N8TC reliable?
The price and inventory of ZXGD3107N8TC are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZXGD3107N8TC is usually 5 days.
3.What payment methods are accepted for ZXGD3107N8TC?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZXGD3107N8TC transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZXGD3107N8TC?
ZXGD3107N8TC orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZXGD3107N8TC order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZXGD3107N8TC?
For technical support, including ZXGD3107N8TC datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZXGD3107N8TC requirements.
6.How does Aetrix verify that ZXGD3107N8TC is sourced from the original manufacturer or authorized distributors?
All ZXGD3107N8TC products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZXGD3107N8TC meets industry standards.
7.What is the process for return or replacement of ZXGD3107N8TC?
All ZXGD3107N8TC units undergo pre-shipment inspection (PSI). If there is an issue with ZXGD3107N8TC, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZXGD3107N8TC part is unused and in its original packaging.
Return procedure for ZXGD3107N8TC:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZXGD3107N8TC Tags

-
ZXGD3009E6TA
Diodes Incorporated

-
1EDN7512BXTSA1
Infineon Technologies
-
UCC27517DBVR
Texas Instruments

-
MCP1416T-E/OT
Microchip Technology

-
MCP1402T-E/OT
Microchip Technology

-
MCP1415T-E/OT
Microchip Technology

-
MCP1401T-E/OT
Microchip Technology

-
IX4428NTR
Littelfuse Inc.

-
IRS2005STRPBF
Infineon Technologies

-
IRS2008STRPBF
Infineon Technologies

-
IX4310TTR
Littelfuse Inc.

-
2EDN7524RXTMA1
Infineon Technologies
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…

