My Inquiry
My Account
Taiwan Semiconductor Corporation 1.5KE13CA R0G
- Part No.:
- 1.5KE13CA R0G
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- TVS Diodes
- Package:
- DO-201AA, DO-27, Axial
- Datasheet:
-
1.5KE13CA R0G.pdf
- Description:
- TVS DIODE 11.1VWM 18.2VC DO201
- Quantity:
- Payment:
- Shipping:
Inventory:7,672
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
1.5KE13CA R0G from Taiwan Semiconductor is a bidirectional 1500W transient voltage suppressor (TVS) diode in DO-201 package, with nominal breakdown voltage 13V, working stand-off voltage 11.1V, clamping voltage 18.2V at 86A peak pulse current, and AEC-Q101 qualification for automotive use. It protects power rails and signal lines against ISO 7637-2 Pulse 1/2a/2b/3a/3b transients in automotive ECUs and industrial control modules.
For engineers reviewing the 1.5KE13CA R0G datasheet, 1.5KE13CA R0G pinout, 1.5KE13CA R0G application, or 1.5KE13CA R0G equivalent, key selection criteria include bidirectional clamping capability, 18.2V VC@IPP, DO-201 mechanical compatibility, AEC-Q101 qualification status, and compliance with ISO 7637-2 immunity requirements.
Technical Context
This bidirectional TVS diode operates symmetrically in both polarities, delivering consistent clamping performance across positive and negative transients. Its low dynamic impedance and sub-5ns response time ensure rapid suppression of fast-rising EFT and load-dump events without affecting system timing.
The device sustains 1500W peak pulse power per 10/1000μs waveform at 25°C, derating linearly above ambient temperature per Fig.2. Junction temperature range spans −55°C to +175°C, supporting under-hood automotive deployment without thermal derating penalties in standard PCB layouts.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VBR (min/max) | 12.4V / 13.7V @ 1.0mA - Ensures reliable conduction onset within tight tolerance for predictable clamping threshold |
| VWM | 11.1V - Maximum continuous reverse operating voltage; sets safe margin below breakdown for stable standby operation |
| VC @ IPP | 18.2V @ 86A - Clamped voltage during full 1500W surge; defines worst-case overvoltage seen by protected ICs |
| PPK | 1500W - Peak pulse power handling per 10/1000μs waveform; enables robust protection against automotive load dump |
| IPP | 86A - Peak impulse current capacity; determines minimum series impedance required for effective energy diversion |
| TJ max | +175°C - Maximum junction temperature; supports placement near heat sources in engine control units |
| AEC-Q101 | Qualified - Validated for automotive-grade reliability including temperature cycling, HTRB, and ESD stress per AEC standard |
Pinout & Package
Package: DO-201 axial leaded package with cathode band marking (bidirectional symmetry means no polarity-dependent orientation; cathode band indicates terminal identification per JEDEC standard).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode/Cathode (symmetrical) | Bidirectional transient conduction path | Either terminal serves as anode or cathode depending on transient polarity; no DC bias dependency |
| Leads (Tin-plated) | PCB interconnect and thermal path | Pure tin plating ensures J-STD-002 solderability; 9.5mm lead length supports 5W steady-state dissipation on 16mm² copper pad |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Identical VBR and VC in both directions - eliminates need for polarity-aware layout in differential or AC-coupled lines |
| ISO 7637-2 compliance | Validated against Pulse 1 (inductive switch-off), Pulse 2a/2b (battery disconnect), Pulse 3a/3b (EFT) - meets OEM ECU immunity requirements |
| Low leakage | <1μA @ 11.1V - prevents standby current drain in always-on automotive modules |
| Fast response | <5.0ns turn-on - captures sub-microsecond transients before downstream ICs experience overstress |
| Halogen-free & RoHS | Complies with IEC 61249-2-21 and EU RoHS Directive - satisfies environmental compliance for global vehicle programs |
Applications
| Automotive Body Control Module (BCM) | Industrial PLC Digital Input Card |
|---|---|
Use Scenario: Protects 12V supply rail and LIN bus lines from battery load dump and alternator ripple in BCMs. IC Role / Device Role / Timing Role: Bidirectional TVS clamps both positive and negative transients on shared power/signal lines without polarity constraints. Use Value: Maintains <18.2V clamping during 86A surges, keeping MCU and transceiver ICs within absolute maximum ratings during ISO 7637-2 Pulse 2b events. |
Use Scenario: Shields 24V digital input optocouplers from inductive kickback when switching solenoids or relays. IC Role / Device Role / Timing Role: Fast-response TVS diverts energy before optocoupler input stage fails, preserving isolation integrity. Use Value: Sub-5ns response limits voltage overshoot to ≤18.2V, preventing premature aging of input-stage ESD structures in industrial-grade optos. |
| LED Headlamp Driver Unit | Automotive Infotainment Power Supply |
Use Scenario: Guards buck converter input against load dump transients in LED headlamp systems with high-current drivers. IC Role / Device Role / Timing Role: High-power TVS absorbs 1500W surge energy, shielding controller ICs and MOSFET gate drivers. Use Value: 175°C max junction temperature allows direct mounting near power inductors, reducing board area vs. remote placement. |
Use Scenario: Secures USB-C PD and CAN-FD power domains against coupled transients from adjacent high-noise subsystems. IC Role / Device Role / Timing Role: Bidirectional clamping protects dual-rail supplies (5V/3.3V) without requiring separate unidirectional devices. Use Value: Symmetric VBR (12.4–13.7V) and VC (18.2V) ensure equal protection margin for positive/negative rail faults. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient voltage suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Littelfuse SMAJ13CA | Same DO-214AC (SMA) package; 13V nominal, 18.2V VC, but rated for 400W only - lower surge capacity than 1.5KE13CA R0G's 1500W | Not suitable for ISO 7637-2 Pulse 2b or load dump; limited to low-energy ESD/EFT scenarios | Select only where space-constrained layouts prevent DO-201 use and surge energy is ≤400W |
| ON Semiconductor 1.5SMC13CA | DO-214AB (SMC) package; identical 13V/18.2V specs and 1500W rating, but not AEC-Q101 qualified | Acceptable for industrial/commercial use; excluded from automotive production due to missing AEC-Q101 validation | Prefer 1.5KE13CA R0G for automotive programs; use 1.5SMC13CA only if AEC-Q101 is not mandated |
Compared with SMAJ13CA and 1.5SMC13CA, the 1.5KE13CA R0G uniquely combines DO-201 mechanical robustness, full 1500W surge rating, and AEC-Q101 qualification-making it the only option qualified for front-end protection in automotive power domains subject to load dump and ISO 7637-2 testing.
Availability
1.5KE13CA R0G is available at Aetrix Electronics and suitable for automotive body electronics, industrial programmable logic controllers, LED lighting drivers, and infotainment power supplies requiring stable component supply across multi-year production cycles.
Supply support for 1.5KE13CA R0G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, specializing in TVS diodes, rectifiers, and power MOSFETs for automotive and industrial markets.
The 1.5KE series was designed specifically for high-energy transient suppression in automotive power systems, emphasizing AEC-Q101 qualification, ISO 7637-2 compliance, and ruggedized DO-201 packaging for under-hood reliability.
FAQ
What does the 'CA' suffix indicate in 1.5KE13CA R0G?
The 'CA' suffix in 1.5KE13CA R0G denotes bidirectional configuration - meaning the device provides symmetrical transient suppression for both positive and negative voltage excursions. This differs from 'A' suffix parts (e.g., 1.5KE13A), which are unidirectional and require correct polarity orientation during placement. The CA version eliminates polarity concerns in AC-coupled or floating signal paths.
Is 1.5KE13CA R0G AEC-Q101 qualified?
Yes, 1.5KE13CA R0G is AEC-Q101 qualified, as confirmed in Taiwan Semiconductor's official 1.5KE series documentation (Version O2104). This qualification covers stress tests including high-temperature reverse bias (HTRB), temperature cycling, and ESD, validating its suitability for automotive electronic control units deployed in harsh environments.
What is the clamping voltage of 1.5KE13CA R0G at its rated surge current?
The clamping voltage (VC) of 1.5KE13CA R0G is 18.2V at 86A peak pulse current (IPP), measured per 10/1000μs waveform. This value represents the maximum voltage imposed on protected circuitry during full-rated surge events and is critical for ensuring downstream ICs remain within their absolute maximum voltage ratings.
Can 1.5KE13CA R0G replace unidirectional 1.5KE13A in existing designs?
No - 1.5KE13CA R0G cannot directly replace unidirectional 1.5KE13A without layout review. While both share identical VBR (12.4–13.7V) and VC (18.2V), the CA variant has symmetrical terminals and no cathode band functional significance, whereas the A variant requires correct anode/cathode orientation. PCB footprint may be identical, but schematic symbol and routing must reflect bidirectional behavior.
What packaging options are available for 1.5KE13CA R0G?
1.5KE13CA R0G is supplied in DO-201 axial package, available in 1,250-piece tape-and-reel (R0G suffix) and 500-piece ammo box formats. The 'R0G' in the part number explicitly denotes the tape-and-reel packaging variant per Taiwan Semiconductor's ordering code convention, enabling automated SMT placement despite its through-hole form factor.
1.5KE13CA R0G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Package/Case:
- DO-201AA, DO-27, Axial
- Series:
- 1.5KE
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 11.1V
- Voltage - Breakdown (Min):
- 12.4V
- Voltage - Clamping (Max) @ Ipp:
- 18.2V
- Current - Peak Pulse (10/1000µs):
- 86A
- Power - Peak Pulse:
- 1500W (1.5kW)
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- DO-201
1.5KE13CA R0G FAQ
1.How can I place an order for 1.5KE13CA R0G through Aetrix?
Please submit a Request for Quotation (RFQ) for 1.5KE13CA R0G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 1.5KE13CA R0G reliable?
The price and inventory of 1.5KE13CA R0G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 1.5KE13CA R0G is usually 5 days.
3.What payment methods are accepted for 1.5KE13CA R0G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 1.5KE13CA R0G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 1.5KE13CA R0G?
1.5KE13CA R0G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 1.5KE13CA R0G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 1.5KE13CA R0G?
For technical support, including 1.5KE13CA R0G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 1.5KE13CA R0G requirements.
6.How does Aetrix verify that 1.5KE13CA R0G is sourced from the original manufacturer or authorized distributors?
All 1.5KE13CA R0G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 1.5KE13CA R0G meets industry standards.
7.What is the process for return or replacement of 1.5KE13CA R0G?
All 1.5KE13CA R0G units undergo pre-shipment inspection (PSI). If there is an issue with 1.5KE13CA R0G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 1.5KE13CA R0G part is unused and in its original packaging.
Return procedure for 1.5KE13CA R0G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
1.5KE13CA R0G Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
