My Inquiry
My Account
Taiwan Semiconductor Corporation 1.5SMC200H
- Part No.:
- 1.5SMC200H
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- TVS Diodes
- Package:
- DO-214AB, SMC
- Datasheet:
-
1.5SMC200H.pdf
- Description:
- 1500W, 200V, 10%, UNIDIRECTIONAL
- Quantity:
- Payment:
- Shipping:
Inventory:6,559
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
1.5SMC200H from Taiwan Semiconductor is a unidirectional surface-mount transient voltage suppressor (TVS) diode designed for high-energy surge protection in power and signal lines. It delivers 1500W peak pulse power, 200V breakdown voltage (VBR = 180–220V), clamps to ≤287V at 5.4A peak impulse current, and operates across –55°C to +150°C junction temperature - deployed in automotive power supply rail protection.
For engineers reviewing the 1.5SMC200H datasheet, 1.5SMC200H pinout, 1.5SMC200H application, or 1.5SMC200H equivalent, key selection criteria include its DO-214AB (SMC) package, unidirectional polarity, 162V working stand-off voltage (VWM), <1μA leakage at rated VWM, and compliance with ISO 7637-2 Pulse 1/2a/2b/3a/3b for automotive transients.
Technical Context
The 1.5SMC200H uses a glass-passivated silicon junction optimized for fast transient response (<1.0 ps) and robust clamping under repetitive or single-event surges. Its unidirectional configuration provides low forward voltage (VF = 5.0V @ 50A) and supports bidirectional use only when paired with complementary devices or specified variants (e.g., 1.5SMC200AH).
Thermally, it features RθJA = 50°C/W and RθJC = 15°C/W, enabling reliable operation up to 150°C junction temperature. It meets AEC-Q101 qualification and JESD201 Class 2 whisker resistance, confirming suitability for automotive-grade production environments.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VBR (min/max) | 180 V / 220 V - ensures reliable triggering above system operating voltage while accommodating process variation |
| VWM | 162 V - maximum continuous DC or RMS voltage the device blocks without significant leakage |
| VC@IPPM | ≤287 V @ 5.4 A - clamping voltage during 10/1000 μs surge defines worst-case overvoltage seen by protected circuitry |
| PPK | 1500 W - peak pulse power handling capacity per single 1ms waveform per IEC 61000-4-5 |
| IR@VWM | <1 μA - ultra-low leakage preserves efficiency in high-impedance or battery-backed circuits |
| TJ max | +150 °C - enables placement near heat-generating components in engine control units or power converters |
| Package | DO-214AB (SMC) - industry-standard surface-mount outline compatible with automated assembly and IPC-7351B footprints |
Pinout & Package
DO-214AB (SMC) package: molded plastic case with matte tin-plated leads, cathode band marking polarity, 0.210 g weight, UL 94V-0 rated compound, and J-STD-002 solderability compliance.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Current entry point in forward bias | Connected to lower-potential side of protected line; enables low-VF conduction during reverse-surge clamping |
| Cathode | Current exit point; marked with band | Connected to higher-potential side (e.g., +12V rail); defines unidirectional clamping direction toward ground |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive electronics per stress-test requirements including temperature cycling, HTRB, and ESD |
| ISO 7637-2 compliant | Withstands Pulse 1 (inductive load dump), Pulse 2a/2b (switching transients), and Pulse 3a/3b (capacitive coupling) waveforms |
| Glass passivated junction | Enhances long-term reliability and moisture resistance vs. epoxy-passivated alternatives in humid environments |
| Fast response time <1.0 ps | Clamps before sensitive downstream ICs experience damaging overvoltage - critical for CAN/LIN bus and MCU I/O protection |
| Moisture sensitivity level 1 | No floor-life limitation or bake requirement prior to reflow - simplifies SMT manufacturing logistics |
Applications
| Automotive Power Rail Protection | Industrial PLC Input Protection |
|---|---|
Use Scenario: Protecting 24V/48V battery-fed ECUs from load-dump transients (ISO 7637-2 Pulse 5a/b) and alternator ripple. IC Role / Device Role / Timing Role: Unidirectional TVS placed between power rail and chassis ground to clamp positive surges above 162V. Use Value: Limits peak rail voltage to ≤287V, preventing damage to 36V-rated DC-DC controllers and microcontrollers. | Use Scenario: Shielding digital input channels on programmable logic controllers from field-wiring induced surges (IEC 61000-4-4/5). IC Role / Device Role / Timing Role: Standoff protector on 24V opto-isolator inputs, absorbing repetitive 1kV/500A transients. Use Value: Maintains <1μA leakage at 24V nominal, ensuring stable logic thresholds while surviving >100,000 surge events. |
| Telecom DC Power Feeds | Renewable Energy Inverter Control |
Use Scenario: Safeguarding PoE-powered equipment and remote radio units connected to outdoor DC distribution lines. IC Role / Device Role / Timing Role: Primary surge arrestor on +48V telecom power input, coordinated with upstream MOVs and downstream filters. Use Value: Clamps lightning-induced surges within 1ps, preserving integrity of Ethernet PHYs and PMICs downstream. | Use Scenario: Protecting gate drivers and sensing circuits in solar string inverters exposed to grid-switching transients. IC Role / Device Role / Timing Role: Secondary-level clamping on isolated 15V auxiliary supplies feeding SiC MOSFET drivers. Use Value: Withstands 1500W pulses without degradation, supporting 20-year field life in desert installations. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMBJ200A | 600W rating, SMB package (smaller footprint), 200V VBR, bidirectional variant available | Limited to lower-energy surges; unsuitable for ISO 7637-2 Pulse 5a/b load dump | Select when space-constrained and peak power demand is ≤600W |
| 1.5KE200A | Through-hole TO-204AA (DO-41), same 1500W rating but slower thermal response and no AEC-Q101 qualification | Not suitable for automated SMT lines or automotive under-hood environments | Select only for legacy through-hole designs or non-automotive industrial use |
Compared with SMBJ200A and 1.5KE200A, the 1.5SMC200H uniquely combines AEC-Q101 qualification, 1500W SMT capability, and ISO 7637-2 compliance - making it the only drop-in solution for next-gen automotive power modules requiring both high energy handling and surface-mount manufacturability.
Availability
1.5SMC200H is available at Aetrix Electronics and suitable for automotive ECU design, industrial PLC input conditioning, and renewable energy inverter protection requiring stable component supply and long-term lifecycle support.
Supply support for 1.5SMC200H includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, serving global automotive, industrial, and consumer markets since 1979.
The 1.5SMC series targets high-reliability transient suppression in harsh environments, with design emphasis on AEC-Q101 compliance, ISO 7637-2 immunity, and SMT manufacturability for power electronics and vehicle networks.
FAQ
What is the clamping voltage of the 1.5SMC200H under standard 10/1000 μs surge conditions?
The 1.5SMC200H exhibits a maximum clamping voltage (VC) of 287 V when subjected to its rated peak impulse current of 5.4 A using the 10/1000 μs waveform defined in IEC 61000-4-5. This value is measured at TA = 25°C and confirms the device's ability to limit overvoltage on protected lines to a safe margin below typical 300V-rated capacitors and MOSFETs. The 1.5SMC200H maintains this performance across its full operational temperature range.
Is the 1.5SMC200H suitable for bidirectional transient protection?
No - the 1.5SMC200H is a unidirectional TVS diode intended for protection against positive-going transients on DC lines referenced to ground. For bidirectional applications (e.g., AC lines or data buses), the 1.5SMC200AH variant must be used. The 1.5SMC200H lacks symmetrical breakdown characteristics and will not clamp negative excursions beyond its forward voltage (~5.0 V), making it inappropriate for true bipolar surge scenarios.
Does the 1.5SMC200H meet automotive qualification standards?
Yes - the 1.5SMC200H is explicitly AEC-Q101 qualified and tested per the full stress-test schedule, including high-temperature reverse bias (HTRB), temperature cycling, and mechanical shock. It also complies with ISO 7637-2 for automotive electrical disturbances (Pulse 1, 2a, 2b, 3a, 3b), confirming suitability for under-hood and body-control module applications where reliability under thermal and electrical stress is mandatory. The 1.5SMC200H carries full traceability and lot-level test reports.
What is the maximum steady-state power dissipation of the 1.5SMC200H at room temperature?
The 1.5SMC200H has a steady-state power dissipation (PD) rating of 6.5 W at TA = 25°C, derived from its thermal resistance (RθJA = 50°C/W) and maximum junction temperature (TJ = 150°C). This value applies only to continuous DC or low-frequency AC loading - not transient events. In practice, the device is operated well below this limit during normal blocking mode due to sub-μA leakage, and its 1500W peak rating governs surge-handling capability, not steady-state thermal design.
How does the 1.5SMC200H compare to the 1.5SMC200AH in terms of electrical performance?
The 1.5SMC200H and 1.5SMC200AH share identical peak pulse power (1500 W), breakdown voltage range (180–220 V), and clamping voltage (287 V), but differ in configuration: the 1.5SMC200H is unidirectional with cathode-band marking, while the 1.5SMC200AH is bidirectional and symmetric in both polarities. The 1.5SMC200AH replaces two unidirectional devices in AC-coupled or floating-line applications, whereas the 1.5SMC200H is optimized for cost-sensitive, ground-referenced DC rails where only positive transients require suppression.
1.5SMC200H Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Package/Case:
- DO-214AB, SMC
- Series:
- 1.5SMC
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 162V
- Voltage - Breakdown (Min):
- 180V
- Voltage - Clamping (Max) @ Ipp:
- 287V
- Current - Peak Pulse (10/1000µs):
- 5.4A
- Power - Peak Pulse:
- 1500W (1.5kW)
- Power Line Protection:
- No
- Applications:
- Telecom
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DO-214AB (SMC)
1.5SMC200H FAQ
1.How can I place an order for 1.5SMC200H through Aetrix?
Please submit a Request for Quotation (RFQ) for 1.5SMC200H on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 1.5SMC200H reliable?
The price and inventory of 1.5SMC200H are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 1.5SMC200H is usually 5 days.
3.What payment methods are accepted for 1.5SMC200H?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 1.5SMC200H transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 1.5SMC200H?
1.5SMC200H orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 1.5SMC200H order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 1.5SMC200H?
For technical support, including 1.5SMC200H datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 1.5SMC200H requirements.
6.How does Aetrix verify that 1.5SMC200H is sourced from the original manufacturer or authorized distributors?
All 1.5SMC200H products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 1.5SMC200H meets industry standards.
7.What is the process for return or replacement of 1.5SMC200H?
All 1.5SMC200H units undergo pre-shipment inspection (PSI). If there is an issue with 1.5SMC200H, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 1.5SMC200H part is unused and in its original packaging.
Return procedure for 1.5SMC200H:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
1.5SMC200H Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
