International Rectifier 2N6787

Overview

2N6787 from International Rectifier is a N-channel legacy power MOSFET / power transistor for chassis-mounted and metal-can power assemblies supplied in the TO-205AF Metal Can package. The device is intended for discrete power switching where board designers need a defined MOSFET package, gate-control interface, drain-source current path, and thermal path.

For engineers reviewing the 2N6787 datasheet, 2N6787 pinout, 2N6787 application, or 2N6787 equivalent, this device is commonly used in automotive load switching, motor control, relay and solenoid switching, DC-DC converter stages, battery power paths, and legacy power-board replacement. Selection should focus on channel polarity, drain-source voltage, continuous and pulsed current, RDS(on), gate charge, body-diode behavior, package thermal resistance, and footprint compatibility.

Technical Context

In circuit use, 2N6787 is normally treated as a legacy metal-can power device where the case connection, mounting hardware, and heatsink interface are part of the electrical design.

The gate-drive circuit should control switching speed while limiting voltage overshoot and protecting the gate oxide. The metal package improves mechanical heat transfer but requires careful isolation and mounting control.

The TO-205 metal can package is often selected for repair, aerospace, industrial, or older power equipment where the original chassis footprint and thermal hardware must be preserved.

Key Specifications

Pinout & Package

The 2N6787 pinout should be checked together with the TO-205AF Metal Can outline, because terminal arrangement and thermal connection affect layout, replacement approval, and assembly method.

For PCB design, keep the high-current power path short, route the gate or control line away from noisy switching nodes, and size copper or heatsinking for the real load current and duty cycle. Metal-can package suited for legacy hermetic or high-reliability power-device assemblies.

Key Features

• 2N6787 is a N-channel power MOSFET for power switching, load control, and converter-stage use.
• TO-205 metal can package affects footprint compatibility, thermal impedance, and assembly method.
• Low RDS(on), gate charge, and package thermal resistance are the main parameters for efficiency and temperature rise.
• Body-diode behavior and avalanche capability support inductive-load and synchronous-switching design checks.
• Can be driven from an external gate driver, controller, or logic stage when gate-drive voltage and timing are validated.
• Suitable for BOM continuation and replacement projects when footprint, pinout, and electrical ratings match the original board.

Applications

Equivalent & Alternatives

When evaluating 2N6787 equivalent devices, engineers should compare only specific orderable part numbers and verify package footprint, pinout, voltage rating, current rating, thermal resistance, switching behavior, qualification status, and suffix or packing requirements before substitution.

Compared with related alternatives, 2N6787 should remain the preferred sourcing reference when the existing BOM, PCB footprint, and qualification documentation require the exact International Rectifier orderable device.

Quality

2N6787 should be sourced as original International Rectifier / Infineon inventory through traceable and controlled supply channels. Quality verification may include package inspection, top-mark validation, label and lot review, solderability inspection, moisture-sensitivity handling review, and electrical screening according to the target production requirement.

Because 2N6787 is used in power switching circuits, final validation should include the actual PCB footprint, thermal path, electrical stress, operating temperature, switching frequency, and fault-condition behavior. Traceable sourcing helps reduce counterfeit risk and supports repeatable performance in production, repair, and maintenance programs.

Availability

2N6787 available at Aetrix Electronics and suitable for power switching, power-conversion, motor-control, load-driver, repair, and BOM-continuity applications requiring stable component supply and controlled replacement planning.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and long-term availability support for OEM manufacturers, repair programs, and electronics production teams.

For production or repair deployment, confirming package type, orderable suffix, lifecycle status, environmental requirement, electrical rating, thermal condition, and sourcing continuity helps reduce procurement risk and improve manufacturing stability.

Manufacturer

International Rectifier was a semiconductor manufacturer known for power MOSFETs, IGBTs, gate drivers, power-management ICs, intelligent power switches, photovoltaic relays, and power modules. International Rectifier products became part of Infineon Technologies' power semiconductor portfolio after the acquisition of International Rectifier.

The 2N6787 ordering line should be reviewed with the relevant International Rectifier legacy product family and current Infineon supply-chain references where available. This is especially important for legacy MOSFETs, IGBT devices, power modules, and automotive AUIR power devices.

FAQ

What is 2N6787 used for?

2N6787 is used in MOSFET switching circuits such as load control, motor drive auxiliaries, DC-DC converter stages, battery power paths, and legacy power boards where its package and ratings match the design.

Where can I find the 2N6787 datasheet download?

The 2N6787 datasheet download is typically available from International Rectifier / Infineon documentation sources or authorized distributor documentation libraries. Use it to confirm ratings, package information, pinout, thermal data, and test conditions.

What should be considered in 2N6787 pinout design?

2N6787 pinout design should confirm the package drawing, terminal functions, thermal path, high-current routing, gate or control routing, and whether the orderable suffix changes package or packing details.

Can 2N6787 be used as a direct replacement?

2N6787 can be used as a direct replacement only when the package footprint, pinout, electrical ratings, thermal behavior, and qualification status match the original design.

What are common 2N6787 equivalent solutions?

Common 2N6787 equivalent directions include IRFF9233, IRFF9221, IRFF9231. Final selection must confirm package, footprint, voltage rating, current rating, thermal performance, and switching behavior.