My Inquiry
My Account
Diodes Incorporated D5V0H1U2LP1610-7
- Part No.:
- D5V0H1U2LP1610-7
- Manufacturer:
- Diodes Incorporated
- Category:
- TVS Diodes
- Package:
- 0603 (1610 Metric)
- Datasheet:
-
D5V0H1U2LP1610-7.pdf
- Description:
- TVS DIODE 5VWM 11.5V U-DFN1610-2
- Quantity:
- Payment:
- Shipping:
Inventory:44,633
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
D5V0H1U2LP1610-7 from Diodes Incorporated is a single-channel unidirectional TVS diode designed for ESD protection of high-speed data lines in portable electronics. It features a 5.5 V minimum breakdown voltage, 90 A peak pulse current (8/20 µs), 800 pF typical channel capacitance, and ±30 kV IEC 61000-4-2 contact/air ESD rating - deployed in USB, HDMI, and audio I/O interfaces of smartphones and digital cameras.
For engineers reviewing the D5V0H1U2LP1610-7 datasheet, D5V0H1U2LP1610-7 pinout, D5V0H1U2LP1610-7 application, or D5V0H1U2LP1610-7 equivalent, key selection criteria include clamping voltage at 90 A (11.5 V), low leakage (<1.0 µA at 5.0 V), thermal resistance (250 °C/W), RoHS/Green compliance, and U-DFN1610-2 package compatibility with high-density PCB layouts.
Technical Context
This TVS diode operates as a unidirectional transient suppressor with avalanche breakdown behavior triggered above 5.5 V reverse standoff. Its low dynamic resistance (0.05 Ω) ensures rapid voltage clamping during ESD events, while its 800 pF input capacitance is optimized to minimize signal integrity impact on 100–480 Mbps interfaces.
The device is rated for continuous power dissipation of 500 mW at 25 °C, derating linearly to zero at 150 °C ambient, and supports operation from –55 °C to +150 °C. Its U-DFN1610-2 (Type B) package uses NiPdAu-plated copper leadframe and meets J-STD-020 Level 1 moisture sensitivity.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Breakdown Voltage (VBR) | 5.5 V min at 1 mA - defines earliest conduction threshold under surge stress |
| Clamping Voltage (VC) | 11.5 V max at 90 A, 8/20 µs - limits downstream IC voltage exposure during worst-case surge |
| Peak Pulse Current (IPP) | 90 A - sustains IEC 61000-4-2 Level 4 ESD surges without failure |
| Channel Capacitance (CT) | 800 pF typ at 0 V, 1 MHz - compatible with USB 2.0 and analog audio paths without bandwidth loss |
| Leakage Current (IR) | <1.0 µA at 5.0 V - avoids DC loading on low-power sensor or bias rails |
| ESD Rating | ±30 kV air & contact per IEC 61000-4-2 - exceeds industrial immunity requirements |
| Thermal Resistance (RθJA) | 250 °C/W - requires minimal copper area for thermal management on FR-4 |
Pinout & Package
Package: U-DFN1610-2 (Type B), 1.6 mm × 1.0 mm × 0.5 mm body, 2-terminal surface-mount, exposed thermal pad not present, JEDEC-compliant green molding compound (UL 94V-0).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode | Connected to protected I/O line; conducts during positive transients when cathode is grounded |
| Pin 2 | Cathode | Connected to system ground; establishes reference for clamping action and ESD current return path |
Key Features
| Feature | Design Value |
|---|---|
| IEC 61000-4-2 ESD robustness | ±30 kV contact/air - eliminates need for secondary ESD filtering in handheld UI ports |
| Low clamping voltage at high current | 11.5 V at 90 A - protects 5 V logic and USB PHYs without overvoltage damage |
| Ultra-low leakage | <1.0 µA at VRWM - preserves battery life in always-on sensor or wake-up circuits |
| Halogen- and antimony-free "Green" construction | <900 ppm Br/Cl, <1000 ppm Sb - satisfies IPC-1752a Tier 2 environmental reporting |
| Lead-free & RoHS 2 compliant | No intentionally added Pb, Cd, Hg, Cr⁶⁺, PBB, PBDE - enables global market access |
Applications
| Smartphone Front Panel I/O | Digital Camera HDMI Interface |
|---|---|
Use Scenario: ESD protection for touchscreen controller and front-facing camera flex cable connectors exposed to user handling. IC Role / Device Role / Timing Role: Unidirectional TVS clamp on 3.3 V I²C and GPIO lines, placed within 3 mm of connector. Use Value: Prevents latch-up or gate oxide rupture in PMIC and touch ASIC during ±30 kV contact discharge events. | Use Scenario: Transient suppression on HDMI TMDS differential pairs and CEC/HEAC control lines in compact camcorders. IC Role / Device Role / Timing Role: Per-channel TVS on each TMDS+/- pair, leveraging 800 pF capacitance to avoid signal rise-time degradation. Use Value: Maintains HDMI 1.4 eye diagram integrity up to 1080p60 while passing IEC 61000-4-2 Level 4 testing. |
| USB-C Audio Dongle | Industrial Handheld Scanner |
Use Scenario: Protection of USB-C CC and SBU pins in analog audio adapters where space limits discrete capacitor-based filtering. IC Role / Device Role / Timing Role: Single-channel TVS on CC1/CC2 lines, operating at 5.0 V standoff to avoid false plug detection. Use Value: Enables reliable hot-plug detection and prevents USB PD negotiation failure after repeated ESD strikes. | Use Scenario: ESD hardening of barcode scan engine trigger button and serial debug port in warehouse-grade scanners. IC Role / Device Role / Timing Role: Low-capacitance TVS on 5 V UART TX/RX lines, mounted adjacent to DB9 or micro-USB debug connector. Use Value: Eliminates firmware reset or communication timeout caused by ±30 kV air discharge on operator-accessible ports. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar TVS diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ5.0A (DO-214AC) | Higher capacitance (1500 pF), larger package (4.5 × 2.7 mm), 100 A IPP | Not suitable for high-speed data lines; used in power rail or low-frequency signal protection | Select only if board space allows DO-214AC and signal bandwidth <10 MHz |
| SP1003-01UTG (SOD-923) | Lower IPP (30 A), smaller footprint (1.0 × 0.6 mm), same 5.5 V VBR | Better for ultra-compact wearables but insufficient for 90 A surge events in ruggedized devices | Choose when size is critical and peak surge exposure is limited to IEC Level 3 (±20 kV) |
Compared with SMAJ5.0A and SP1003-01UTG, D5V0H1U2LP1610-7 uniquely balances 90 A surge capability, 800 pF capacitance, and 1.6 × 1.0 mm footprint - making it optimal for space-constrained, high-reliability portable data interfaces requiring full Level 4 ESD immunity.
Availability
D5V0H1U2LP1610-7 is available at Aetrix Electronics and suitable for smartphone front-panel I/O, digital camera HDMI interfaces, and USB-C audio dongles requiring stable component supply across high-mix, low-volume production runs.
Supply support for D5V0H1U2LP1610-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design centers across Asia and manufacturing in China, Taiwan, and the US.
This device belongs to Diodes' TVS Diode portfolio targeting portable electronics protection, engineered specifically for high-surge, low-capacitance ESD suppression in miniaturized consumer interfaces.
FAQ
What is the maximum clamping voltage at 90 A for D5V0H1U2LP1610-7?
The maximum clamping voltage is 11.5 V at 90 A, measured with an 8/20 µs current waveform. This value is specified in the Electrical Characteristics table of DS38332 Rev. 1–2 and represents the upper limit of voltage seen by downstream circuitry during worst-case ESD events, ensuring compatibility with 5 V tolerant I/O structures.
Is D5V0H1U2LP1610-7 unidirectional or bidirectional?
D5V0H1U2LP1610-7 is a unidirectional TVS diode. Its schematic symbol and pin configuration (anode/cathode) confirm operation only during positive transients relative to ground. It does not provide symmetric protection for negative surges - a second device or bidirectional variant would be required for full ± transient coverage.
Can this TVS be used on USB 3.0 SuperSpeed lanes?
No - its 800 pF typical capacitance introduces excessive insertion loss and jitter on USB 3.0 (5 Gbps) differential pairs. It is validated for USB 2.0 (480 Mbps) and lower-speed interfaces like I²C, UART, and HDMI 1.4 TMDS. For SuperSpeed, Diodes' D5V0F1U2LP1610 (350 pF) or equivalent low-capacitance TVS is recommended.
What is the moisture sensitivity level (MSL) and reflow profile compliance?
D5V0H1U2LP1610-7 has MSL Level 1 per J-STD-020, meaning it is not moisture-sensitive and may be stored indefinitely at ≤30 °C/60% RH without baking. It supports standard lead-free reflow profiles with peak temperature up to 260 °C, and its NiPdAu terminals ensure reliable solder joint formation per MIL-STD-202, Method 208.
D5V0H1U2LP1610-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- 0603 (1610 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- 11.5V
- Current - Peak Pulse (10/1000µs):
- 90A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 800pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- U-DFN1610-2 (Type B)
D5V0H1U2LP1610-7 FAQ
1.How can I place an order for D5V0H1U2LP1610-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for D5V0H1U2LP1610-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for D5V0H1U2LP1610-7 reliable?
The price and inventory of D5V0H1U2LP1610-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for D5V0H1U2LP1610-7 is usually 5 days.
3.What payment methods are accepted for D5V0H1U2LP1610-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for D5V0H1U2LP1610-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for D5V0H1U2LP1610-7?
D5V0H1U2LP1610-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your D5V0H1U2LP1610-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for D5V0H1U2LP1610-7?
For technical support, including D5V0H1U2LP1610-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your D5V0H1U2LP1610-7 requirements.
6.How does Aetrix verify that D5V0H1U2LP1610-7 is sourced from the original manufacturer or authorized distributors?
All D5V0H1U2LP1610-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that D5V0H1U2LP1610-7 meets industry standards.
7.What is the process for return or replacement of D5V0H1U2LP1610-7?
All D5V0H1U2LP1610-7 units undergo pre-shipment inspection (PSI). If there is an issue with D5V0H1U2LP1610-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The D5V0H1U2LP1610-7 part is unused and in its original packaging.
Return procedure for D5V0H1U2LP1610-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
D5V0H1U2LP1610-7 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
