My Inquiry
My Account
Diodes Incorporated D5V0L1B2LPSQ-7B
- Part No.:
- D5V0L1B2LPSQ-7B
- Manufacturer:
- Diodes Incorporated
- Category:
- TVS Diodes
- Package:
- 2-UFDFN
- Datasheet:
-
D5V0L1B2LPSQ-7B.pdf
- Description:
- TVS DIODE 5VWM 14VC 2DFN
- Quantity:
- Payment:
- Shipping:
Inventory:8,622
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
D5V0L1B2LPSQ-7B from Diodes Incorporated is a bi-directional transient voltage suppression (TVS) diode designed for ESD protection of high-speed data lines in portable electronics. It features a 5 V reverse standoff voltage, ±30 kV IEC 61000-4-2 contact/air ESD rating, 15 pF typical input capacitance, and 6 A peak pulse current handling - enabling robust protection without signal integrity degradation in USB 2.0, HDMI, and audio interfaces.
For engineers reviewing the D5V0L1B2LPSQ-7B datasheet, D5V0L1B2LPSQ-7B pinout, D5V0L1B2LPSQ-7B application, or D5V0L1B2LPSQ-7B equivalent, key selection criteria include low clamping voltage (≤11.5 V at 6 A), ultra-small U-DFN1006-2/SWP footprint (1.08 mm × 0.68 mm), AEC-Q101 qualification for automotive infotainment, and optical-solderable sidewall plating for post-reflow inspection.
Technical Context
This TVS diode operates as a bi-directional clamp between signal line and ground, activating above its 6 V minimum breakdown voltage to shunt ESD transients while maintaining <100 nA leakage at 5 V. Its low 15 pF capacitance ensures minimal loading on high-frequency interfaces up to 480 Mbps.
The device uses silicon avalanche junction technology with optimized doping and geometry to achieve consistent clamping performance across temperature (–65 °C to +150 °C) and repeatable ±30 kV ESD immunity per IEC 61000-4-2, validated under both contact and air discharge test conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous operating voltage before clamping begins; matches standard 5 V I/O rails. |
| Breakdown Voltage (Min) | 6 V - Guaranteed conduction onset at ≥6 V, providing margin against false triggering during normal operation. |
| Clamping Voltage (6 A) | 11.5 V (typ) - Peak voltage seen by protected circuit during worst-case 6 A 8/20 μs surge; limits stress on downstream ICs. |
| ESD Rating | ±30 kV (IEC 61000-4-2) - Full immunity to human-body-model-like discharges, eliminating need for external ESD filters. |
| Input Capacitance | 15 pF (typ) - Enables use on USB 2.0 and other 480 Mbps interfaces without signal rise-time degradation. |
| Package | U-DFN1006-2/SWP - 1.08 mm × 0.68 mm footprint with sidewall plating for automated optical solder-joint inspection. |
| Thermal Resistance | 500 °C/W - Allows safe dissipation of 84 W peak pulse power when mounted on standard FR-4 PCB with 2 oz copper. |
Pinout & Package
Package: U-DFN1006-2/SWP - ultra-thin (0.53 mm max height), halogen-free molded plastic with 100% Sn-plated terminals and J-STD-020 Level 1 moisture sensitivity.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode (Channel Input) | Connected to protected signal line; forms bi-directional clamp path with Pin 2. |
| Pin 2 | Cathode (Ground Reference) | Connected to system ground; completes ESD current path during positive or negative transients. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 Qualified | Validated for automotive infotainment and telematics modules requiring PPAP documentation and IATF16949 manufacturing control. |
| Optical Solder Inspection Ready | Sidewall plating enables AOI verification of solder joint quality post-reflow, reducing field failure risk in high-volume assembly. |
| Low-Leakage Protection | 10 nA typical IR at 5 V ensures negligible standby current draw in battery-powered devices like smartphones and wearables. |
| Green Compliance | Fully RoHS 3 compliant, halogen- and antimony-free (<900 ppm Br/Cl, <1000 ppm Sb), meeting automotive and consumer environmental mandates. |
Applications
| USB 2.0 Data Lines | HDMI Hot-Plug Detection |
|---|---|
Use Scenario: Protecting D+ and D− lines in smartphone charging ports and OTG adapters from repeated ESD events during cable insertion. IC Role / Device Role / Timing Role: Bi-directional voltage clamp that activates within nanoseconds to limit transient overvoltage to ≤11.5 V. Use Value: Prevents gate oxide damage in USB PHY transceivers while preserving 480 Mbps signal integrity via 15 pF capacitance. |
Use Scenario: Safeguarding HDMI CEC and HPD pins in set-top boxes and AV receivers exposed to user-handling ESD. IC Role / Device Role / Timing Role: Low-capacitance shunt protector placed directly at connector, minimizing trace inductance impact. Use Value: Maintains reliable hot-plug detection timing by limiting clamping delay to <1 ns and avoiding false HPD toggles. |
| Automotive Infotainment Touchscreens | Portable Audio DAC Interfaces |
Use Scenario: Shielding I²C and GPIO lines connecting touch controller to head unit MCU in vehicles subjected to cabin ESD. IC Role / Device Role / Timing Role: AEC-Q101-qualified bi-directional TVS ensuring functional safety compliance for ASIL-B adjacent systems. Use Value: Eliminates touchscreen ghost-touch errors caused by ESD-induced latch-up, verified across –40 °C to +105 °C operating range. |
Use Scenario: Protecting I²S data and clock lines between SoC and audio codec in wireless earbuds and Bluetooth speakers. IC Role / Device Role / Timing Role: Signal-line protector with <100 nA leakage to avoid DC offset drift in precision analog audio paths. Use Value: Preserves SNR >100 dB by preventing ESD-induced noise coupling into sensitive DAC reference and bias networks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bi-directional TVS diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMAJ5.0A | DO-214AC package (4.5 mm × 3.3 mm); 600 W PPP; 100 pF capacitance | Not suitable for high-speed interfaces; used in power rail or low-frequency signal protection | Select only for cost-sensitive industrial controls where board space and speed are non-critical. |
| SP1001-01UTG | SOD-323 package; 5 V VRWM; 12 pF capacitance; ±15 kV ESD rating | Lacks AEC-Q101 qualification and fails IEC 61000-4-2 ±30 kV requirement | Acceptable for consumer-grade wearables but not automotive or medical-grade ESD-critical designs. |
Compared with SMAJ5.0A and SP1001-01UTG, D5V0L1B2LPSQ-7B uniquely delivers automotive-grade reliability, ultra-low capacitance, and full ±30 kV ESD immunity in a 1.08 mm × 0.68 mm footprint - making it the only option qualified for next-generation compact, high-speed, and safety-conscious portable and vehicular interfaces.
Availability
D5V0L1B2LPSQ-7B is available at Aetrix Electronics and suitable for USB 2.0 interface protection, automotive infotainment touchscreen I/O, and portable audio DAC signal routing requiring stable component supply across production lifecycles.
Supply support for D5V0L1B2LPSQ-7B includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and ICs, specializing in high-reliability protection, signal integrity, and power management solutions for automotive, industrial, and consumer markets.
D5V0L1B2LPSQ-7B belongs to Diodes' Ultra-Low Capacitance TVS portfolio, engineered specifically for ESD-hardened high-speed serial interfaces in space-constrained portable and automotive electronics.
FAQ
What is the maximum clamping voltage at 6 A peak pulse current?
The D5V0L1B2LPSQ-7B exhibits a maximum clamping voltage of 14.0 V at 6 A (8/20 μs waveform), with a typical value of 11.5 V. This is measured per Figure 5 in DS36586 Rev. 2–2 and ensures protected ICs experience less than 12 V transient stress during worst-case ESD events.
Is this device suitable for automotive applications?
Yes - D5V0L1B2LPSQ-7B is AEC-Q101 qualified, PPAP capable, and manufactured in IATF16949-certified facilities. It meets automotive requirements for infotainment, ADAS sensor interfaces, and body electronics where ESD immunity and long-term reliability are mandatory.
How does the sidewall plating benefit manufacturing?
The U-DFN1006-2/SWP package's sidewall plating enables automated optical inspection (AOI) of solder joints after reflow, verifying fillet formation and wetting without X-ray. This reduces escape defects in high-volume SMT lines for smartphones and automotive modules.
What is the thermal derating behavior above 25 °C ambient?
Per Figure 3 in the datasheet, the device's peak pulse power derates linearly from 100% at 25 °C to ~75% at 125 °C ambient. At 150 °C, it retains ~60% of rated 84 W capability - enabled by its 500 °C/W RθJA on standard FR-4 layout with 2 oz copper.
D5V0L1B2LPSQ-7B Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- 2-UFDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 14V
- Current - Peak Pulse (10/1000µs):
- 6A (8/20µs)
- Power - Peak Pulse:
- 84W
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 15pF @ 1MHz
- Operating Temperature:
- -65°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- U-DFN1006-2/SWP
D5V0L1B2LPSQ-7B FAQ
1.How can I place an order for D5V0L1B2LPSQ-7B through Aetrix?
Please submit a Request for Quotation (RFQ) for D5V0L1B2LPSQ-7B on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for D5V0L1B2LPSQ-7B reliable?
The price and inventory of D5V0L1B2LPSQ-7B are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for D5V0L1B2LPSQ-7B is usually 5 days.
3.What payment methods are accepted for D5V0L1B2LPSQ-7B?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for D5V0L1B2LPSQ-7B transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for D5V0L1B2LPSQ-7B?
D5V0L1B2LPSQ-7B orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your D5V0L1B2LPSQ-7B order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for D5V0L1B2LPSQ-7B?
For technical support, including D5V0L1B2LPSQ-7B datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your D5V0L1B2LPSQ-7B requirements.
6.How does Aetrix verify that D5V0L1B2LPSQ-7B is sourced from the original manufacturer or authorized distributors?
All D5V0L1B2LPSQ-7B products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that D5V0L1B2LPSQ-7B meets industry standards.
7.What is the process for return or replacement of D5V0L1B2LPSQ-7B?
All D5V0L1B2LPSQ-7B units undergo pre-shipment inspection (PSI). If there is an issue with D5V0L1B2LPSQ-7B, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The D5V0L1B2LPSQ-7B part is unused and in its original packaging.
Return procedure for D5V0L1B2LPSQ-7B:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
D5V0L1B2LPSQ-7B Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
